kernel/linux.git, branch v6.1.7

Linux 6.1.7

2023-01-18T10:58:34+00:00

Link: https://lore.kernel.org/r/20230116154803.321528435@linuxfoundation.org Tested-by: Salvatore Bonaccorso Tested-by: Ronald Warsow Tested-by: Conor Dooley Tested-by: Shuah Khan Tested-by: Justin M. Forbes Tested-by: Takeshi Ogasawara Tested-by: Rudi Heitbaum Tested-by: Bagas Sanjaya Tested-by: Ron Economos Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Tested-by: Sudip Mukherjee Tested-by: Allen Pais Link: https://lore.kernel.org/r/20230117124546.116438951@linuxfoundation.org Tested-by: Allen Pais Tested-by: Ronald Warsow Tested-by: Ron Economos Tested-by: Takeshi Ogasawara Tested-by: Guenter Roeck Tested-by: Kelsey Steele Tested-by: Bagas Sanjaya Tested-by: Fenil Jain Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman

pinctrl: amd: Add dynamic debugging for active GPIOs

2023-01-18T10:58:34+00:00

commit 1d66e379731f79ae5039a869c0fde22a4f6a6a91 upstream. Some laptops have been reported to wake up from s2idle when plugging in the AC adapter or by closing the lid. This is a surprising behavior that is further clarified by commit cb3e7d624c3ff ("PM: wakeup: Add extra debugging statement for multiple active IRQs"). With that commit in place the following interaction can be seen when the lid is closed: [ 28.946038] PM: suspend-to-idle [ 28.946083] ACPI: EC: ACPI EC GPE status set [ 28.946101] ACPI: PM: Rearming ACPI SCI for wakeup [ 28.950152] Timekeeping suspended for 3.320 seconds [ 28.950152] PM: Triggering wakeup from IRQ 9 [ 28.950152] ACPI: EC: ACPI EC GPE status set [ 28.950152] ACPI: EC: ACPI EC GPE dispatched [ 28.995057] ACPI: EC: ACPI EC work flushed [ 28.995075] ACPI: PM: Rearming ACPI SCI for wakeup [ 28.995131] PM: Triggering wakeup from IRQ 9 [ 28.995271] ACPI: EC: ACPI EC GPE status set [ 28.995291] ACPI: EC: ACPI EC GPE dispatched [ 29.098556] ACPI: EC: ACPI EC work flushed [ 29.207020] ACPI: EC: ACPI EC work flushed [ 29.207037] ACPI: PM: Rearming ACPI SCI for wakeup [ 29.211095] Timekeeping suspended for 0.739 seconds [ 29.211095] PM: Triggering wakeup from IRQ 9 [ 29.211079] PM: Triggering wakeup from IRQ 7 [ 29.211095] ACPI: PM: ACPI non-EC GPE wakeup [ 29.211095] PM: resume from suspend-to-idle * IRQ9 on this laptop is used for the ACPI SCI. * IRQ7 on this laptop is used for the GPIO controller. What has occurred is when the lid was closed the EC woke up the SoC from it's deepest sleep state and the kernel's s2idle loop processed all EC events. When it was finished processing EC events, it checked for any other reasons to wake (break the s2idle loop). The IRQ for the GPIO controller was active so the loop broke, and then this IRQ was processed. This is not a kernel bug but it is certainly a surprising behavior, and to better debug it we should have a dynamic debugging message that we can enact to catch it. Acked-by: Basavaraj Natikar Acked-by: Kai-Heng Feng Acked-by: Mark Pearson Signed-off-by: Mario Limonciello Link: https://lore.kernel.org/r/20221013134729.5592-2-mario.limonciello@amd.com Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"

2023-01-18T10:58:33+00:00

commit b659b613cea2ae39746ca8bd2b69d1985dd9d770 upstream. This reverts commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/ Fixes: 8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: stable@vger.kernel.org Reported-by: Guenter Roeck Signed-off-by: Ferry Toth Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman

block: handle bio_split_to_limits() NULL return

2023-01-18T10:58:33+00:00

commit 613b14884b8595e20b9fac4126bf627313827fbe upstream. This can't happen right now, but in preparation for allowing bio_split_to_limits() returning NULL if it ended the bio, check for it in all the callers. Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

io_uring/io-wq: only free worker if it was allocated for creation

2023-01-18T10:58:33+00:00

commit e6db6f9398dadcbc06318a133d4c44a2d3844e61 upstream. We have two types of task_work based creation, one is using an existing worker to setup a new one (eg when going to sleep and we have no free workers), and the other is allocating a new worker. Only the latter should be freed when we cancel task_work creation for a new worker. Fixes: af82425c6a2d ("io_uring/io-wq: free worker if task_work creation is canceled") Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

io_uring/io-wq: free worker if task_work creation is canceled

2023-01-18T10:58:33+00:00

commit af82425c6a2d2f347c79b63ce74fca6dc6be157f upstream. If we cancel the task_work, the worker will never come into existance. As this is the last reference to it, ensure that we get it freed appropriately. Cc: stable@vger.kernel.org Reported-by: 진호 Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman

drm/i915: Fix CFI violations in gt_sysfs

2023-01-18T10:58:33+00:00

commit a8a4f0467d706fc22d286dfa973946e5944b793c upstream. When booting with CONFIG_CFI_CLANG, there are numerous violations when accessing the files under /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0: $ cd /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0 $ grep . * id:0 punit_req_freq_mhz:350 rc6_enable:1 rc6_residency_ms:214934 rps_act_freq_mhz:1300 rps_boost_freq_mhz:1300 rps_cur_freq_mhz:350 rps_max_freq_mhz:1300 rps_min_freq_mhz:350 rps_RP0_freq_mhz:1300 rps_RP1_freq_mhz:350 rps_RPn_freq_mhz:350 throttle_reason_pl1:0 throttle_reason_pl2:0 throttle_reason_pl4:0 throttle_reason_prochot:0 throttle_reason_ratl:0 throttle_reason_status:0 throttle_reason_thermal:0 throttle_reason_vr_tdc:0 throttle_reason_vr_thermalert:0 $ sudo dmesg &| grep "CFI failure at" [ 214.595903] CFI failure at kobj_attr_show+0x19/0x30 (target: id_show+0x0/0x70 [i915]; expected type: 0xc527b809) [ 214.596064] CFI failure at kobj_attr_show+0x19/0x30 (target: punit_req_freq_mhz_show+0x0/0x40 [i915]; expected type: 0xc527b809) [ 214.596407] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_enable_show+0x0/0x40 [i915]; expected type: 0xc527b809) [ 214.596528] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_residency_ms_show+0x0/0x270 [i915]; expected type: 0xc527b809) [ 214.596682] CFI failure at kobj_attr_show+0x19/0x30 (target: act_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.596792] CFI failure at kobj_attr_show+0x19/0x30 (target: boost_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.596893] CFI failure at kobj_attr_show+0x19/0x30 (target: cur_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.596996] CFI failure at kobj_attr_show+0x19/0x30 (target: max_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.597099] CFI failure at kobj_attr_show+0x19/0x30 (target: min_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.597198] CFI failure at kobj_attr_show+0x19/0x30 (target: RP0_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.597301] CFI failure at kobj_attr_show+0x19/0x30 (target: RP1_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.597405] CFI failure at kobj_attr_show+0x19/0x30 (target: RPn_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809) [ 214.597538] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.597701] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.597836] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.597952] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.598071] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.598177] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.598307] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.598439] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) [ 214.598542] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809) With kCFI, indirect calls are validated against their expected type versus actual type and failures occur when the two types do not match. The ultimate issue is that these sysfs functions are expecting to be called via dev_attr_show() but they may also be called via kobj_attr_show(), as certain files are created under two different kobjects that have two different sysfs_ops in intel_gt_sysfs_register(), hence the warnings above. When accessing the gt_ files under /sys/devices/pci0000:00/0000:00:02.0/drm/card0, which are using the same sysfs functions, there are no violations, meaning the functions are being called with the proper type. To make everything work properly, adjust certain functions to match the type of the ->show() and ->store() members in 'struct kobj_attribute'. Add a macro to generate functions for that can be called via both dev_attr_{show,store}() or kobj_attr_{show,store}() so that they can be called through both kobject locations without violating kCFI and adjust the attribute groups to account for this. Link: https://github.com/ClangBuiltLinux/linux/issues/1716 Reviewed-by: Andi Shyti Reviewed-by: Andrzej Hajda Reviewed-by: Kees Cook Signed-off-by: Nathan Chancellor Signed-off-by: Andi Shyti Link: https://patchwork.freedesktop.org/patch/msgid/20221013205909.1282545-1-nathan@kernel.org Signed-off-by: Nathan Chancellor Signed-off-by: Greg Kroah-Hartman

io_uring/poll: attempt request issue after racy poll wakeup

2023-01-18T10:58:33+00:00

commit 6e5aedb9324aab1c14a23fae3d8eeb64a679c20e upstream. If we have multiple requests waiting on the same target poll waitqueue, then it's quite possible to get a request triggered and get disappointed in not being able to make any progress with it. If we race in doing so, we'll potentially leave the poll request on the internal tables, but removed from the waitqueue. That means that any subsequent trigger of the poll waitqueue will not kick that request into action, causing an application to potentially wait for completion of a request that will never happen. Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather than have complicated logic for how to re-arm a given type of request, just punt it for a reissue. While in there, move the 'ret' variable to the only section where it gets used. This avoids confusion the scope of it. Cc: stable@vger.kernel.org Fixes: eb0089d629ba ("io_uring: single shot poll removal optimisation") Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

io_uring: lock overflowing for IOPOLL

2023-01-18T10:58:33+00:00

commit 544d163d659d45a206d8929370d5a2984e546cb7 upstream. syzbot reports an issue with overflow filling for IOPOLL: WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0 Workqueue: events_unbound io_ring_exit_work Call trace: io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734 io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773 io_fill_cqe_req io_uring/io_uring.h:168 [inline] io_do_iopoll+0x474/0x62c io_uring/rw.c:1065 io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513 io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056 io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869 process_one_work+0x2d8/0x504 kernel/workqueue.c:2289 worker_thread+0x340/0x610 kernel/workqueue.c:2436 kthread+0x12c/0x158 kernel/kthread.c:376 ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863 There is no real problem for normal IOPOLL as flush is also called with uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL, for which __io_cqring_overflow_flush() happens from the CQ waiting path. Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Pavel Begunkov Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

efi: fix NULL-deref in init error path

2023-01-18T10:58:32+00:00

[ Upstream commit 703c13fe3c9af557d312f5895ed6a5fda2711104 ] In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer. Fixes: 98086df8b70c ("efi: add missed destroy_workqueue when efisubsys_init fails") Cc: stable@vger.kernel.org Cc: Li Heng Signed-off-by: Johan Hovold Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin