kernel/linux.git, branch v6.1.60

Linux 6.1.60

2023-10-25T10:03:17+00:00

Link: https://lore.kernel.org/r/20231023104828.488041585@linuxfoundation.org Tested-by: SeongJae Park Tested-by: Ricardo B. Marliere Tested-by: Allen Pais Tested-by: Florian Fainelli Tested-by: Pavel Machek (CIP) Tested-by: Bagas Sanjaya Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Ron Economos Tested-by: Salvatore Bonaccorso Tested-by: Takeshi Ogasawara Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: join: no RST when rm subflow/addr

2023-10-25T10:03:17+00:00

commit 2cfaa8b3b7aece3c7b13dd10db20dcea65875692 upstream. Recently, we noticed that some RST were wrongly generated when removing the initial subflow. This patch makes sure RST are not sent when removing any subflows or any addresses. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni Signed-off-by: Matthieu Baerts Signed-off-by: Mat Martineau Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Matthieu Baerts Signed-off-by: Greg Kroah-Hartman

selftests: mptcp: join: correctly check for no RST

2023-10-25T10:03:16+00:00

commit b134a5805455d1886662a6516c965cdb9df9fbcc upstream. The commit mentioned below was more tolerant with the number of RST seen during a test because in some uncontrollable situations, multiple RST can be generated. But it was not taking into account the case where no RST are expected: this validation was then no longer reporting issues for the 0 RST case because it is not possible to have less than 0 RST in the counter. This patch fixes the issue by adding a specific condition. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau Signed-off-by: Matthieu Baerts Signed-off-by: Mat Martineau Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Matthieu Baerts Signed-off-by: Greg Kroah-Hartman

mptcp: avoid sending RST when closing the initial subflow

2023-10-25T10:03:16+00:00

commit 14c56686a64c65ba716ff48f1f4b19c85f4cb2a9 upstream. When closing the first subflow, the MPTCP protocol unconditionally calls tcp_disconnect(), which in turn generates a reset if the subflow is established. That is unexpected and different from what MPTCP does with MPJ subflows, where resets are generated only on FASTCLOSE and other edge scenarios. We can't reuse for the first subflow the same code in place for MPJ subflows, as MPTCP clean them up completely via a tcp_close() call, while must keep the first subflow socket alive for later re-usage, due to implementation constraints. This patch adds a new helper __mptcp_subflow_disconnect() that encapsulates, a logic similar to tcp_close, issuing a reset only when the MPTCP_CF_FASTCLOSE flag is set, and performing a clean shutdown otherwise. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts Co-developed-by: Paolo Abeni Signed-off-by: Paolo Abeni Signed-off-by: Geliang Tang Signed-off-by: Mat Martineau Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-4-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Matthieu Baerts Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name

2023-10-25T10:03:16+00:00

commit cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream. The code pattern of memcpy(dst, src, strlen(src)) is almost always wrong. In this case it is wrong because it leaves memory uninitialized if it is less than sizeof(ni->name), and overflows ni->name when longer. Normally strtomem_pad() could be used here, but since ni->name is a trailing array in struct hci_mon_new_index, compilers that don't support -fstrict-flex-arrays=3 can't tell how large this array is via __builtin_object_size(). Instead, open-code the helper and use sizeof() since it will work correctly. Additionally mark ni->name as __nonstring since it appears to not be a %NUL terminated C string. Cc: Luiz Augusto von Dentz Cc: Edward AD Cc: Marcel Holtmann Cc: Johan Hedberg Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: linux-bluetooth@vger.kernel.org Cc: netdev@vger.kernel.org Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event") Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/ Signed-off-by: Kees Cook Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

Bluetooth: hci_sock: fix slab oob read in create_monitor_event

2023-10-25T10:03:16+00:00

commit 18f547f3fc074500ab5d419cf482240324e73a7e upstream. When accessing hdev->name, the actual string length should prevail Reported-by: syzbot+c90849c50ed209d77689@syzkaller.appspotmail.com Fixes: dcda165706b9 ("Bluetooth: hci_core: Fix build warnings") Signed-off-by: Edward AD Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman

net: move altnames together with the netdevice

2023-10-25T10:03:16+00:00

commit 8e15aee621618a3ee3abecaf1fd8c1428098b7ef upstream. The altname nodes are currently not moved to the new netns when netdevice itself moves: [ ~]# ip netns add test [ ~]# ip -netns test link add name eth0 type dummy [ ~]# ip -netns test link property add dev eth0 altname some-name [ ~]# ip -netns test link show dev some-name 2: eth0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 1e:67:ed:19:3d:24 brd ff:ff:ff:ff:ff:ff altname some-name [ ~]# ip -netns test link set dev eth0 netns 1 [ ~]# ip link ... 3: eth0: mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 02:40:88:62:ec:b8 brd ff:ff:ff:ff:ff:ff altname some-name [ ~]# ip li show dev some-name Device "some-name" does not exist. Remove them from the hash table when device is unlisted and add back when listed again. Fixes: 36fbf1e52bd3 ("net: rtnetlink: add linkprop commands to add and delete alternative ifnames") Reviewed-by: Jiri Pirko Signed-off-by: Jakub Kicinski Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

phy: mapphone-mdm6600: Fix pinctrl_pm handling for sleep pins

2023-10-25T10:03:16+00:00

[ Upstream commit 3b384cc74b00b5ac21d18e4c1efc3c1da5300971 ] Looks like the driver sleep pins configuration is unusable. Adding the sleep pins causes the usb phy to not respond. We need to use the default pins in probe, and only set sleep pins at phy_mdm6600_device_power_off(). As the modem can also be booted to a serial port mode for firmware flashing, let's make the pin changes limited to probe and remove. For probe, we get the default pins automatically. We only need to set the sleep pins in phy_mdm6600_device_power_off() to prevent the modem from waking up because the gpio line glitches. If it turns out that we need a separate state for phy_mdm6600_power_on() and phy_mdm6600_power_off(), we can use the pinctrl idle state. Cc: Ivaylo Dimitrov Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Fixes: 2ad2af081622 ("phy: mapphone-mdm6600: Improve phy related runtime PM calls") Signed-off-by: Tony Lindgren Reviewed-by: Sebastian Reichel Link: https://lore.kernel.org/r/20230913060433.48373-3-tony@atomide.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: mapphone-mdm6600: Fix runtime PM for remove

2023-10-25T10:03:16+00:00

[ Upstream commit b99e0ba9633af51638e5ee1668da2e33620c134f ] Otherwise we will get an underflow on remove. Cc: Ivaylo Dimitrov Cc: Merlijn Wajer Cc: Pavel Machek Cc: Sebastian Reichel Fixes: f7f50b2a7b05 ("phy: mapphone-mdm6600: Add runtime PM support for n_gsm on USB suspend") Signed-off-by: Tony Lindgren Reviewed-by: Sebastian Reichel Link: https://lore.kernel.org/r/20230913060433.48373-2-tony@atomide.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

phy: mapphone-mdm6600: Fix runtime disable on probe

2023-10-25T10:03:16+00:00

[ Upstream commit 719606154c7033c068a5d4c1dc5f9163b814b3c8 ] Commit d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") caused a regression where we now unconditionally disable runtime PM at the end of the probe while it is only needed on errors. Cc: Ivaylo Dimitrov Cc: Merlijn Wajer Cc: Miaoqian Lin Cc: Pavel Machek Reviewed-by: Sebastian Reichel Fixes: d644e0d79829 ("phy: mapphone-mdm6600: Fix PM error handling in phy_mdm6600_probe") Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20230913060433.48373-1-tony@atomide.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin