kernel/linux.git, branch v6.1.47

Linux 6.1.47

2023-08-23T15:52:42+00:00

Link: https://lore.kernel.org/r/20230821194122.695845670@linuxfoundation.org Tested-by: Joel Fernandes (Google) Tested-by: Takeshi Ogasawara Tested-by: Bagas Sanjaya Tested-by: SeongJae Park Tested-by: Shuah Khan Tested-by: Florian Fainelli Tested-by: Ron Economos Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_remove

2023-08-23T15:52:42+00:00

commit 58abdd80b93b09023ca03007b608685c41e3a289 upstream. The order of function calls in sdhci_f_sdh30_remove is wrong, let's call sdhci_pltfm_unregister first. Cc: Uwe Kleine-König Fixes: 5def5c1c15bf ("mmc: sdhci-f-sdh30: Replace with sdhci_pltfm") Signed-off-by: Yangtao Li Reported-by: Uwe Kleine-König Acked-by: Uwe Kleine-König Acked-by: Adrian Hunter Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230727070051.17778-62-frank.li@vivo.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

net: fix the RTO timer retransmitting skb every 1ms if linear option is enabled

2023-08-23T15:52:42+00:00

commit e4dd0d3a2f64b8bd8029ec70f52bdbebd0644408 upstream. In the real workload, I encountered an issue which could cause the RTO timer to retransmit the skb per 1ms with linear option enabled. The amount of lost-retransmitted skbs can go up to 1000+ instantly. The root cause is that if the icsk_rto happens to be zero in the 6th round (which is the TCP_THIN_LINEAR_RETRIES value), then it will always be zero due to the changed calculation method in tcp_retransmit_timer() as follows: icsk->icsk_rto = min(icsk->icsk_rto << 1, TCP_RTO_MAX); Above line could be converted to icsk->icsk_rto = min(0 << 1, TCP_RTO_MAX) = 0 Therefore, the timer expires so quickly without any doubt. I read through the RFC 6298 and found that the RTO value can be rounded up to a certain value, in Linux, say TCP_RTO_MIN as default, which is regarded as the lower bound in this patch as suggested by Eric. Fixes: 36e31b0af587 ("net: TCP thin linear timeouts") Suggested-by: Eric Dumazet Signed-off-by: Jason Xing Reviewed-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

drm/nouveau/disp: fix use-after-free in error handling of nouveau_connector_create

2023-08-23T15:52:42+00:00

commit 1b254b791d7b7dea6e8adc887fbbd51746d8bb27 upstream. We can't simply free the connector after calling drm_connector_init on it. We need to clean up the drm side first. It might not fix all regressions from commit 2b5d1c29f6c4 ("drm/nouveau/disp: PIOR DP uses GPIO for HPD, not PMGR AUX interrupts"), but at least it fixes a memory corruption in error handling related to that commit. Link: https://lore.kernel.org/lkml/20230806213107.GFZNARG6moWpFuSJ9W@fat_crate.local/ Fixes: 95983aea8003 ("drm/nouveau/disp: add connector class") Signed-off-by: Karol Herbst Reviewed-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20230814144933.3956959-1-kherbst@redhat.com Signed-off-by: Karol Herbst Signed-off-by: Greg Kroah-Hartman

af_unix: Fix null-ptr-deref in unix_stream_sendpage().

2023-08-23T15:52:42+00:00

Bing-Jhong Billy Jheng reported null-ptr-deref in unix_stream_sendpage() with detailed analysis and a nice repro. unix_stream_sendpage() tries to add data to the last skb in the peer's recv queue without locking the queue. If the peer's FD is passed to another socket and the socket's FD is passed to the peer, there is a loop between them. If we close both sockets without receiving FD, the sockets will be cleaned up by garbage collection. The garbage collection iterates such sockets and unlinks skb with FD from the socket's receive queue under the queue's lock. So, there is a race where unix_stream_sendpage() could access an skb locklessly that is being released by garbage collection, resulting in use-after-free. To avoid the issue, unix_stream_sendpage() must lock the peer's recv queue. Note the issue does not exist in 6.5+ thanks to the recent sendpage() refactoring. This patch is originally written by Linus Torvalds. BUG: unable to handle page fault for address: ffff988004dd6870 PF: supervisor read access in kernel mode PF: error_code(0x0000) - not-present page PGD 0 P4D 0 PREEMPT SMP PTI CPU: 4 PID: 297 Comm: garbage_uaf Not tainted 6.1.46 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc_node+0xa2/0x1e0 Code: c0 0f 84 32 01 00 00 41 83 fd ff 74 10 48 8b 00 48 c1 e8 3a 41 39 c5 0f 85 1c 01 00 00 41 8b 44 24 28 49 8b 3c 24 48 8d 4a 40 <49> 8b 1c 06 4c 89 f0 65 48 0f c7 0f 0f 94 c0 84 c0 74 a1 41 8b 44 RSP: 0018:ffffc9000079fac0 EFLAGS: 00000246 RAX: 0000000000000070 RBX: 0000000000000005 RCX: 000000000001a284 RDX: 000000000001a244 RSI: 0000000000400cc0 RDI: 000000000002eee0 RBP: 0000000000400cc0 R08: 0000000000400cc0 R09: 0000000000000003 R10: 0000000000000001 R11: 0000000000000000 R12: ffff888003970f00 R13: 00000000ffffffff R14: ffff988004dd6800 R15: 00000000000000e8 FS: 00007f174d6f3600(0000) GS:ffff88807db00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff988004dd6870 CR3: 00000000092be000 CR4: 00000000007506e0 PKRU: 55555554 Call Trace: ? __die_body.cold+0x1a/0x1f ? page_fault_oops+0xa9/0x1e0 ? fixup_exception+0x1d/0x310 ? exc_page_fault+0xa8/0x150 ? asm_exc_page_fault+0x22/0x30 ? kmem_cache_alloc_node+0xa2/0x1e0 ? __alloc_skb+0x16c/0x1e0 __alloc_skb+0x16c/0x1e0 alloc_skb_with_frags+0x48/0x1e0 sock_alloc_send_pskb+0x234/0x270 unix_stream_sendmsg+0x1f5/0x690 sock_sendmsg+0x5d/0x60 ____sys_sendmsg+0x210/0x260 ___sys_sendmsg+0x83/0xd0 ? kmem_cache_alloc+0xc6/0x1c0 ? avc_disable+0x20/0x20 ? percpu_counter_add_batch+0x53/0xc0 ? alloc_empty_file+0x5d/0xb0 ? alloc_file+0x91/0x170 ? alloc_file_pseudo+0x94/0x100 ? __fget_light+0x9f/0x120 __sys_sendmsg+0x54/0xa0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x69/0xd3 RIP: 0033:0x7f174d639a7d Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 8a c1 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 de c1 f4 ff 48 RSP: 002b:00007ffcb563ea50 EFLAGS: 00000293 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f174d639a7d RDX: 0000000000000000 RSI: 00007ffcb563eab0 RDI: 0000000000000007 RBP: 00007ffcb563eb10 R08: 0000000000000000 R09: 00000000ffffffff R10: 00000000004040a0 R11: 0000000000000293 R12: 00007ffcb563ec28 R13: 0000000000401398 R14: 0000000000403e00 R15: 00007f174d72c000 Fixes: 869e7c62486e ("net: af_unix: implement stream sendpage support") Reported-by: Bing-Jhong Billy Jheng Reviewed-by: Bing-Jhong Billy Jheng Co-developed-by: Linus Torvalds Signed-off-by: Linus Torvalds Signed-off-by: Kuniyuki Iwashima Signed-off-by: Greg Kroah-Hartman

drm/amdgpu: keep irq count in amdgpu_irq_disable_all

2023-08-23T15:52:42+00:00

commit 8ffd6f0442674f32c048ec8dffdbc5ec67829beb upstream. This can clean up all irq warnings because of unbalanced amdgpu_irq_get/put when unplugging/unbinding device, and leave irq count decrease in each ip fini function. Signed-off-by: Guchun Chen Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/amd/pm: skip the RLC stop when S0i3 suspend for SMU v13.0.4/11

2023-08-23T15:52:41+00:00

commit 730d44e1fa306a20746ad4a85da550662aed9daa upstream. For SMU v13.0.4/11, driver does not need to stop RLC for S0i3, the firmwares will handle that properly. Signed-off-by: Tim Huang Reviewed-by: Mario Limonciello Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

arm64/ptrace: Ensure that SME is set up for target when writing SSVE state

2023-08-23T15:52:41+00:00

commit 5d0a8d2fba50e9c07cde4aad7fba28c008b07a5b upstream. When we use NT_ARM_SSVE to either enable streaming mode or change the vector length for a process we do not currently do anything to ensure that there is storage allocated for the SME specific register state. If the task had not previously used SME or we changed the vector length then the task will not have had TIF_SME set or backing storage for ZA/ZT allocated, resulting in inconsistent register sizes when saving state and spurious traps which flush the newly set register state. We should set TIF_SME to disable traps and ensure that storage is allocated for ZA and ZT if it is not already allocated. This requires modifying sme_alloc() to make the flush of any existing register state optional so we don't disturb existing state for ZA and ZT. Fixes: e12310a0d30f ("arm64/sme: Implement ptrace support for streaming mode SVE registers") Reported-by: David Spickett Signed-off-by: Mark Brown Cc: # 5.19.x Link: https://lore.kernel.org/r/20230810-arm64-fix-ptrace-race-v1-1-a5361fad2bd6@kernel.org Signed-off-by: Catalin Marinas Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

netfilter: set default timeout to 3 secs for sctp shutdown send and recv state

2023-08-23T15:52:41+00:00

commit 9bfab6d23a2865966a4f89a96536fbf23f83bc8c upstream. In SCTP protocol, it is using the same timer (T2 timer) for SHUTDOWN and SHUTDOWN_ACK retransmission. However in sctp conntrack the default timeout value for SCTP_CONNTRACK_SHUTDOWN_ACK_SENT state is 3 secs while it's 300 msecs for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV state. As Paolo Valerio noticed, this might cause unwanted expiration of the ct entry. In my test, with 1s tc netem delay set on the NAT path, after the SHUTDOWN is sent, the sctp ct entry enters SCTP_CONNTRACK_SHUTDOWN_SEND state. However, due to 300ms (too short) delay, when the SHUTDOWN_ACK is sent back from the peer, the sctp ct entry has expired and been deleted, and then the SHUTDOWN_ACK has to be dropped. Also, it is confusing these two sysctl options always show 0 due to all timeout values using sec as unit: net.netfilter.nf_conntrack_sctp_timeout_shutdown_recd = 0 net.netfilter.nf_conntrack_sctp_timeout_shutdown_sent = 0 This patch fixes it by also using 3 secs for sctp shutdown send and recv state in sctp conntrack, which is also RTO.initial value in SCTP protocol. Note that the very short time value for SCTP_CONNTRACK_SHUTDOWN_SEND/RECV was probably used for a rare scenario where SHUTDOWN is sent on 1st path but SHUTDOWN_ACK is replied on 2nd path, then a new connection started immediately on 1st path. So this patch also moves from SHUTDOWN_SEND/RECV to CLOSE when receiving INIT in the ORIGINAL direction. Fixes: 9fb9cbb1082d ("[NETFILTER]: Add nf_conntrack subsystem.") Reported-by: Paolo Valerio Signed-off-by: Xin Long Reviewed-by: Simon Horman Signed-off-by: Florian Westphal Signed-off-by: Greg Kroah-Hartman

hugetlb: do not clear hugetlb dtor until allocating vmemmap

2023-08-23T15:52:41+00:00

commit 32c877191e022b55fe3a374f3d7e9fb5741c514d upstream. Patch series "Fix hugetlb free path race with memory errors". In the discussion of Jiaqi Yan's series "Improve hugetlbfs read on HWPOISON hugepages" the race window was discovered. https://lore.kernel.org/linux-mm/20230616233447.GB7371@monkey/ Freeing a hugetlb page back to low level memory allocators is performed in two steps. 1) Under hugetlb lock, remove page from hugetlb lists and clear destructor 2) Outside lock, allocate vmemmap if necessary and call low level free Between these two steps, the hugetlb page will appear as a normal compound page. However, vmemmap for tail pages could be missing. If a memory error occurs at this time, we could try to update page flags non-existant page structs. A much more detailed description is in the first patch. The first patch addresses the race window. However, it adds a hugetlb_lock lock/unlock cycle to every vmemmap optimized hugetlb page free operation. This could lead to slowdowns if one is freeing a large number of hugetlb pages. The second path optimizes the update_and_free_pages_bulk routine to only take the lock once in bulk operations. The second patch is technically not a bug fix, but includes a Fixes tag and Cc stable to avoid a performance regression. It can be combined with the first, but was done separately make reviewing easier. This patch (of 2): Freeing a hugetlb page and releasing base pages back to the underlying allocator such as buddy or cma is performed in two steps: - remove_hugetlb_folio() is called to remove the folio from hugetlb lists, get a ref on the page and remove hugetlb destructor. This all must be done under the hugetlb lock. After this call, the page can be treated as a normal compound page or a collection of base size pages. - update_and_free_hugetlb_folio() is called to allocate vmemmap if needed and the free routine of the underlying allocator is called on the resulting page. We can not hold the hugetlb lock here. One issue with this scheme is that a memory error could occur between these two steps. In this case, the memory error handling code treats the old hugetlb page as a normal compound page or collection of base pages. It will then try to SetPageHWPoison(page) on the page with an error. If the page with error is a tail page without vmemmap, a write error will occur when trying to set the flag. Address this issue by modifying remove_hugetlb_folio() and update_and_free_hugetlb_folio() such that the hugetlb destructor is not cleared until after allocating vmemmap. Since clearing the destructor requires holding the hugetlb lock, the clearing is done in remove_hugetlb_folio() if the vmemmap is present. This saves a lock/unlock cycle. Otherwise, destructor is cleared in update_and_free_hugetlb_folio() after allocating vmemmap. Note that this will leave hugetlb pages in a state where they are marked free (by hugetlb specific page flag) and have a ref count. This is not a normal state. The only code that would notice is the memory error code, and it is set up to retry in such a case. A subsequent patch will create a routine to do bulk processing of vmemmap allocation. This will eliminate a lock/unlock cycle for each hugetlb page in the case where we are freeing a large number of pages. Link: https://lkml.kernel.org/r/20230711220942.43706-1-mike.kravetz@oracle.com Link: https://lkml.kernel.org/r/20230711220942.43706-2-mike.kravetz@oracle.com Fixes: ad2fa3717b74 ("mm: hugetlb: alloc the vmemmap pages associated with each HugeTLB page") Signed-off-by: Mike Kravetz Reviewed-by: Muchun Song Tested-by: Naoya Horiguchi Cc: Axel Rasmussen Cc: James Houghton Cc: Jiaqi Yan Cc: Miaohe Lin Cc: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Mike Kravetz Signed-off-by: Greg Kroah-Hartman