kernel/linux.git, branch v5.4.31

Linux 5.4.31

2020-04-08T07:08:47+00:00

mm: mempolicy: require at least one nodeid for MPOL_PREFERRED

2020-04-08T07:08:47+00:00

commit aa9f7d5172fac9bf1f09e678c35e287a40a7b7dd upstream. Using an empty (malformed) nodelist that is not caught during mount option parsing leads to a stack-out-of-bounds access. The option string that was used was: "mpol=prefer:,". However, MPOL_PREFERRED requires a single node number, which is not being provided here. Add a check that 'nodes' is not empty after parsing for MPOL_PREFERRED's nodeid. Fixes: 095f1fc4ebf3 ("mempolicy: rework shmem mpol parsing and display") Reported-by: Entropy Moe <3ntr0py1337@gmail.com> Reported-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Tested-by: syzbot+b055b1a6b2b958707a21@syzkaller.appspotmail.com Cc: Lee Schermerhorn Link: http://lkml.kernel.org/r/89526377-7eb6-b662-e1d8-4430928abde9@infradead.org Signed-off-by: Linus Torvalds Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

padata: always acquire cpu_hotplug_lock before pinst->lock

2020-04-08T07:08:47+00:00

commit 38228e8848cd7dd86ccb90406af32de0cad24be3 upstream. lockdep complains when padata's paths to update cpumasks via CPU hotplug and sysfs are both taken: # echo 0 > /sys/devices/system/cpu/cpu1/online # echo ff > /sys/kernel/pcrypt/pencrypt/parallel_cpumask ====================================================== WARNING: possible circular locking dependency detected 5.4.0-rc8-padata-cpuhp-v3+ #1 Not tainted ------------------------------------------------------ bash/205 is trying to acquire lock: ffffffff8286bcd0 (cpu_hotplug_lock.rw_sem){++++}, at: padata_set_cpumask+0x2b/0x120 but task is already holding lock: ffff8880001abfa0 (&pinst->lock){+.+.}, at: padata_set_cpumask+0x26/0x120 which lock already depends on the new lock. padata doesn't take cpu_hotplug_lock and pinst->lock in a consistent order. Which should be first? CPU hotplug calls into padata with cpu_hotplug_lock already held, so it should have priority. Fixes: 6751fb3c0e0c ("padata: Use get_online_cpus/put_online_cpus") Signed-off-by: Daniel Jordan Cc: Eric Biggers Cc: Herbert Xu Cc: Steffen Klassert Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

net: Fix Tx hash bound checking

2020-04-08T07:08:46+00:00

commit 6e11d1578fba8d09d03a286740ffcf336d53928c upstream. Fixes the lower and upper bounds when there are multiple TCs and traffic is on the the same TC on the same device. The lower bound is represented by 'qoffset' and the upper limit for hash value is 'qcount + qoffset'. This gives a clean Rx to Tx queue mapping when there are multiple TCs, as the queue indices for upper TCs will be offset by 'qoffset'. v2: Fixed commit description based on comments. Fixes: 1b837d489e06 ("net: Revoke export for __skb_tx_hash, update it to just be static skb_tx_hash") Fixes: eadec877ce9c ("net: Add support for subordinate traffic classes to netdev_pick_tx") Signed-off-by: Amritha Nambiar Reviewed-by: Alexander Duyck Reviewed-by: Sridhar Samudrala Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device

2020-04-08T07:08:46+00:00

commit 04bbb97d1b732b2d197f103c5818f5c214a4cf81 upstream. Martin noticed that nct6775 driver does not load properly on his system in v5.4+ kernels. The issue was bisected to commit b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond") but it is likely not the culprit because the faulty code has been in the driver already since commit 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs"). So more likely some commit that added PCI IDs of recent chipsets made the driver to create the iTCO_wdt device on Martins system. The issue was debugged to be PCI configuration access to the PMC device that is not present. This returns all 1's when read and this caused the iTCO_wdt driver to accidentally request resourses used by nct6775. It turns out that the SMI resource is only required for some ancient systems, not the ones supported by this driver. For this reason do not populate the SMI resource at all and drop all the related code. The driver now always populates the main I/O resource and only in case of SPT (Intel Sunrisepoint) compatible devices it adds another resource for the NO_REBOOT bit. These two resources are of different types so platform_get_resource() used by the iTCO_wdt driver continues to find the both resources at index 0. Link: https://lore.kernel.org/linux-hwmon/CAM1AHpQ4196tyD=HhBu-2donSsuogabkfP03v1YF26Q7_BgvgA@mail.gmail.com/ Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs") [wsa: complete fix needs all of http://patchwork.ozlabs.org/project/linux-i2c/list/?series=160959&state=*] Reported-by: Martin Volf Signed-off-by: Mika Westerberg Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional

2020-04-08T07:08:46+00:00

commit e42b0c24389d5a1602e77db4f6def0d5a19e3e43 upstream. The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version (or higher), and when legacy iTCO_vendorsupport is set. Modify the driver so that ICH_RES_IO_SMI is optional if the two conditions are not met. Signed-off-by: Mika Westerberg Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

watchdog: iTCO_wdt: Export vendorsupport

2020-04-08T07:08:46+00:00

commit 7ca6ee38909109751bfab79e9f6c570d2ed258c6 upstream. In preparation for making ->smi_res optional the iTCO_wdt driver needs to know whether vendorsupport is being set to non-zero. For this reason export the variable. Signed-off-by: Mika Westerberg Reviewed-by: Guenter Roeck Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

tcp: fix TFO SYNACK undo to avoid double-timestamp-undo

2020-04-08T07:08:45+00:00

commit dad8cea7add96a353fa1898b5ccefbb72da66f29 upstream. In a rare corner case the new logic for undo of SYNACK RTO could result in triggering the warning in tcp_fastretrans_alert() that says: WARN_ON(tp->retrans_out != 0); The warning looked like: WARNING: CPU: 1 PID: 1 at net/ipv4/tcp_input.c:2818 tcp_ack+0x13e0/0x3270 The sequence that tickles this bug is: - Fast Open server receives TFO SYN with data, sends SYNACK - (client receives SYNACK and sends ACK, but ACK is lost) - server app sends some data packets - (N of the first data packets are lost) - server receives client ACK that has a TS ECR matching first SYNACK, and also SACKs suggesting the first N data packets were lost - server performs TS undo of SYNACK RTO, then immediately enters recovery - buggy behavior then performed a *second* undo that caused the connection to be in CA_Open with retrans_out != 0 Basically, the incoming ACK packet with SACK blocks causes us to first undo the cwnd reduction from the SYNACK RTO, but then immediately enters fast recovery, which then makes us eligible for undo again. And then tcp_rcv_synrecv_state_fastopen() accidentally performs an undo using a "mash-up" of state from two different loss recovery phases: it uses the timestamp info from the ACK of the original SYNACK, and the undo_marker from the fast recovery. This fix refines the logic to only invoke the tcp_try_undo_loss() inside tcp_rcv_synrecv_state_fastopen() if the connection is still in CA_Loss. If peer SACKs triggered fast recovery, then tcp_rcv_synrecv_state_fastopen() can't safely undo. Fixes: 794200d66273 ("tcp: undo cwnd on Fast Open spurious SYNACK retransmit") Signed-off-by: Neal Cardwell Signed-off-by: Yuchung Cheng Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

IB/hfi1: Ensure pq is not left on waitlist

2020-04-08T07:08:45+00:00

commit 9a293d1e21a6461a11b4217b155bf445e57f4131 upstream. The following warning can occur when a pq is left on the dmawait list and the pq is then freed: WARNING: CPU: 47 PID: 3546 at lib/list_debug.c:29 __list_add+0x65/0xc0 list_add corruption. next->prev should be prev (ffff939228da1880), but was ffff939cabb52230. (next=ffff939cabb52230). Modules linked in: mmfs26(OE) mmfslinux(OE) tracedev(OE) 8021q garp mrp ib_isert iscsi_target_mod target_core_mod crc_t10dif crct10dif_generic opa_vnic rpcrdma ib_iser libiscsi scsi_transport_iscsi ib_ipoib(OE) bridge stp llc iTCO_wdt iTCO_vendor_support intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crct10dif_pclmul crct10dif_common crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd ast ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm pcspkr joydev drm_panel_orientation_quirks i2c_i801 mei_me lpc_ich mei wmi ipmi_si ipmi_devintf ipmi_msghandler nfit libnvdimm acpi_power_meter acpi_pad hfi1(OE) rdmavt(OE) rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm ib_core binfmt_misc numatools(OE) xpmem(OE) ip_tables nfsv3 nfs_acl nfs lockd grace sunrpc fscache igb ahci libahci i2c_algo_bit dca libata ptp pps_core crc32c_intel [last unloaded: i2c_algo_bit] CPU: 47 PID: 3546 Comm: wrf.exe Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.41.1.el7.x86_64 #1 Hardware name: HPE.COM HPE SGI 8600-XA730i Gen10/X11DPT-SB-SG007, BIOS SBED1229 01/22/2019 Call Trace: [] dump_stack+0x19/0x1b [] __warn+0xd8/0x100 [] warn_slowpath_fmt+0x5f/0x80 [] ? ___slab_alloc+0x24e/0x4f0 [] __list_add+0x65/0xc0 [] defer_packet_queue+0x145/0x1a0 [hfi1] [] sdma_check_progress+0x67/0xa0 [hfi1] [] sdma_send_txlist+0x432/0x550 [hfi1] [] ? kmem_cache_alloc+0x179/0x1f0 [] ? user_sdma_send_pkts+0xc3/0x1990 [hfi1] [] user_sdma_send_pkts+0x158a/0x1990 [hfi1] [] ? try_to_del_timer_sync+0x5e/0x90 [] ? __check_object_size+0x1ca/0x250 [] hfi1_user_sdma_process_request+0xd66/0x1280 [hfi1] [] hfi1_aio_write+0xca/0x120 [hfi1] [] do_sync_readv_writev+0x7b/0xd0 [] do_readv_writev+0xce/0x260 [] ? pick_next_task_fair+0x5f/0x1b0 [] ? sched_clock_cpu+0x85/0xc0 [] ? __schedule+0x13a/0x860 [] vfs_writev+0x35/0x60 [] SyS_writev+0x7f/0x110 [] system_call_fastpath+0x22/0x27 The issue happens when wait_event_interruptible_timeout() returns a value <= 0. In that case, the pq is left on the list. The code continues sending packets and potentially can complete the current request with the pq still on the dmawait list provided no descriptor shortage is seen. If the pq is torn down in that state, the sdma interrupt handler could find the now freed pq on the list with list corruption or memory corruption resulting. Fix by adding a flush routine to ensure that the pq is never on a list after processing a request. A follow-up patch series will address issues with seqlock surfaced in: https://lore.kernel.org/r/20200320003129.GP20941@ziepe.ca The seqlock use for sdma will then be converted to a spin lock since the list_empty() doesn't need the protection afforded by the sequence lock currently in use. Fixes: a0d406934a46 ("staging/rdma/hfi1: Add page lock limit check for SDMA requests") Link: https://lore.kernel.org/r/20200320200200.23203.37777.stgit@awfm-01.aw.intel.com Reviewed-by: Kaike Wan Signed-off-by: Mike Marciniszyn Signed-off-by: Dennis Dalessandro Signed-off-by: Jason Gunthorpe Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix sendmsg(MSG_WAITALL) handling

2020-04-08T07:08:45+00:00

commit 498b577660f08cef5d9e78e0ed6dcd4c0939e98c upstream. Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the timeout for when a signal occurs up to at least two jiffies as a 1 jiffy timeout may end up being effectively 0 if jiffies wraps at the wrong time. Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Signed-off-by: David Howells Signed-off-by: Greg Kroah-Hartman