kernel/linux.git, branch v5.4.228

Linux 5.4.228

2022-12-19T11:24:17+00:00

Link: https://lore.kernel.org/r/20221215172905.468656378@linuxfoundation.org Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Jon Hunter Tested-by: Sudip Mukherjee Tested-by: Florian Fainelli Tested-by: Guenter Roeck Tested-by: Hulk Robot Signed-off-by: Greg Kroah-Hartman

ASoC: ops: Correct bounds check for second channel on SX controls

2022-12-19T11:24:16+00:00

commit f33bcc506050f89433a52a3052054d4ebd37b1c1 upstream. Currently the check against the max value for the control is being applied after the value has had the minimum applied and been masked. But the max value simply indicates the number of volume levels on an SX control, and as such should just be applied on the raw value. Fixes: 97eea946b939 ("ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()") Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20221125162348.1288005-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

can: mcba_usb: Fix termination command argument

2022-12-19T11:24:16+00:00

[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ] Microchip USB Analyzer can activate the internal termination resistors by setting the "termination" option ON, or OFF to to deactivate them. As I've observed, both with my oscilloscope and captured USB packets below, you must send "0" to turn it ON, and "1" to turn it OFF. From the schematics in the user's guide, I can confirm that you must drive the CAN_RES signal LOW "0" to activate the resistors. Reverse the argument value of usb_msg.termination to fix this. These are the two commands sequence, ON then OFF. > No. Time Source Destination Protocol Length Info > 1 0.000000 host 1.3.1 USB 46 URB_BULK out > > Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) > USB URB > Leftover Capture Data: a80000000000000000000000000000000000a8 > > No. Time Source Destination Protocol Length Info > 2 4.372547 host 1.3.1 USB 46 URB_BULK out > > Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) > USB URB > Leftover Capture Data: a80100000000000000000000000000000000a9 Signed-off-by: Yasushi SHOJI Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

can: sja1000: fix size of OCR_MODE_MASK define

2022-12-19T11:24:16+00:00

[ Upstream commit 26e8f6a75248247982458e8237b98c9fb2ffcf9d ] bitfield mode in ocr register has only 2 bits not 3, so correct the OCR_MODE_MASK define. Signed-off-by: Heiko Schocher Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de Signed-off-by: Marc Kleine-Budde Signed-off-by: Sasha Levin

pinctrl: meditatek: Startup with the IRQs disabled

2022-12-19T11:24:16+00:00

[ Upstream commit 11780e37565db4dd064d3243ca68f755c13f65b4 ] If the system is restarted via kexec(), the peripherals do not start with a known state. If the previous system had enabled an IRQs we will receive unexected IRQs that can lock the system. [ 28.109251] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] [ 28.109263] Modules linked in: [ 28.109273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.79-14458-g4b9edf7b1ac6 #1 9f2e76613148af94acccd64c609a552fb4b4354b [ 28.109284] Hardware name: Google Elm (DT) [ 28.109290] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.109298] pc : __do_softirq+0xa0/0x388 [ 28.109309] lr : __do_softirq+0x70/0x388 [ 28.109316] sp : ffffffc008003ee0 [ 28.109321] x29: ffffffc008003f00 x28: 000000000000000a x27: 0000000000000080 [ 28.109334] x26: 0000000000000001 x25: ffffffefa7b350c0 x24: ffffffefa7b47480 [ 28.109346] x23: ffffffefa7b3d000 x22: 0000000000000000 x21: ffffffefa7b0fa40 [ 28.109358] x20: ffffffefa7b005b0 x19: ffffffefa7b47480 x18: 0000000000065b6b [ 28.109370] x17: ffffffefa749c8b0 x16: 000000000000018c x15: 00000000000001b8 [ 28.109382] x14: 00000000000d3b6b x13: 0000000000000006 x12: 0000000000057e91 [ 28.109394] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffefa7b47480 [ 28.109406] x8 : 00000000000000e0 x7 : 000000000f424000 x6 : 0000000000000000 [ 28.109418] x5 : ffffffefa7dfaca0 x4 : ffffffefa7dfadf0 x3 : 000000000000000f [ 28.109429] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000001ac65c5 [ 28.109441] Call trace: [ 28.109447] __do_softirq+0xa0/0x388 [ 28.109454] irq_exit+0xc0/0xe0 [ 28.109464] handle_domain_irq+0x68/0x90 [ 28.109473] gic_handle_irq+0xac/0xf0 [ 28.109480] call_on_irq_stack+0x28/0x50 [ 28.109488] do_interrupt_handler+0x44/0x58 [ 28.109496] el1_interrupt+0x30/0x58 [ 28.109506] el1h_64_irq_handler+0x18/0x24 [ 28.109512] el1h_64_irq+0x7c/0x80 [ 28.109519] arch_local_irq_enable+0xc/0x18 [ 28.109529] default_idle_call+0x40/0x140 [ 28.109539] do_idle+0x108/0x290 [ 28.109547] cpu_startup_entry+0x2c/0x30 [ 28.109554] rest_init+0xe8/0xf8 [ 28.109562] arch_call_rest_init+0x18/0x24 [ 28.109571] start_kernel+0x338/0x42c [ 28.109578] __primary_switched+0xbc/0xc4 [ 28.109588] Kernel panic - not syncing: softlockup: hung tasks Signed-off-by: Ricardo Ribalda Link: https://lore.kernel.org/r/20221122-mtk-pinctrl-v1-1-bedf5655a3d2@chromium.org Reviewed-by: AngeloGioacchino Del Regno Reviewed-by: Matthias Brugger Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin

ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()

2022-12-19T11:24:16+00:00

[ Upstream commit 97eea946b93961fffd29448dcda7398d0d51c4b2 ] The bounds checks in snd_soc_put_volsw_sx() are only being applied to the first channel, meaning it is possible to write out of bounds values to the second channel in stereo controls. Add appropriate checks. Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/20220511134137.169575-2-broonie@kernel.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

nfp: fix use-after-free in area_cache_get()

2022-12-19T11:24:16+00:00

commit 02e1a114fdb71e59ee6770294166c30d437bf86a upstream. area_cache_get() is used to distribute cache->area and set cache->id, and if cache->id is not 0 and cache->area->kref refcount is 0, it will release the cache->area by nfp_cpp_area_release(). area_cache_get() set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire(). But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is is already set but the refcount is not increased as expected. At this time, calling the nfp_cpp_area_release() will cause use-after-free. To avoid the use-after-free, set cache->id after area_init() and nfp_cpp_area_acquire() complete successfully. Note: This vulnerability is triggerable by providing emulated device equipped with specified configuration. BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1 Call Trace: nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884) Allocated by task 1: nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303) nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802) nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230) nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215) nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744) Freed by task 1: kfree (mm/slub.c:4562) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873) nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973) nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48) Signed-off-by: Jialiang Wang Reviewed-by: Yinjun Zhang Acked-by: Simon Horman Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

block: unhash blkdev part inode when the part is deleted

2022-12-19T11:24:16+00:00

v5.11 changes the blkdev lookup mechanism completely since commit 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get"), and small part of the change is to unhash part bdev inode when deleting partition. Turns out this kind of change does fix one nasty issue in case of BLOCK_EXT_MAJOR: 1) when one partition is deleted & closed, disk_put_part() is always called before bdput(bdev), see blkdev_put(); so the part's devt can be freed & re-used before the inode is dropped 2) then new partition with same devt can be created just before the inode in 1) is dropped, then the old inode/bdev structurein 1) is re-used for this new partition, this way causes use-after-free and kernel panic. It isn't possible to backport the whole big patchset of "merge struct block_device and struct hd_struct v4" for addressing this issue. https://lore.kernel.org/linux-block/20201128161510.347752-1-hch@lst.de/ So fixes it by unhashing part bdev in delete_partition(), and this way is actually aligned with v5.11+'s behavior. Backported from the following 5.10.y commit: 5f2f77560591 ("block: unhash blkdev part inode when the part is deleted") Reported-by: Shiwei Cui Tested-by: Shiwei Cui Cc: Christoph Hellwig Cc: Jan Kara Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman

mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page

2022-12-19T11:24:15+00:00

commit fac35ba763ed07ba93154c95ffc0c4a55023707f upstream. On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb (2M and 1G), but also CONT-PTE/PMD size(64K and 32M) if a 4K page size specified. So when looking up a CONT-PTE size hugetlb page by follow_page(), it will use pte_offset_map_lock() to get the pte entry lock for the CONT-PTE size hugetlb in follow_page_pte(). However this pte entry lock is incorrect for the CONT-PTE size hugetlb, since we should use huge_pte_lock() to get the correct lock, which is mm->page_table_lock. That means the pte entry of the CONT-PTE size hugetlb under current pte lock is unstable in follow_page_pte(), we can continue to migrate or poison the pte entry of the CONT-PTE size hugetlb, which can cause some potential race issues, even though they are under the 'pte lock'. For example, suppose thread A is trying to look up a CONT-PTE size hugetlb page by move_pages() syscall under the lock, however antoher thread B can migrate the CONT-PTE hugetlb page at the same time, which will cause thread A to get an incorrect page, if thread A also wants to do page migration, then data inconsistency error occurs. Moreover we have the same issue for CONT-PMD size hugetlb in follow_huge_pmd(). To fix above issues, rename the follow_huge_pmd() as follow_huge_pmd_pte() to handle PMD and PTE level size hugetlb, which uses huge_pte_lock() to get the correct pte entry lock to make the pte entry stable. Mike said: Support for CONT_PMD/_PTE was added with bb9dd3df8ee9 ("arm64: hugetlb: refactor find_num_contig()"). Patch series "Support for contiguous pte hugepages", v4. However, I do not believe these code paths were executed until migration support was added with 5480280d3f2d ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages") I would go with 5480280d3f2d for the Fixes: targe. Link: https://lkml.kernel.org/r/635f43bdd85ac2615a58405da82b4d33c6e5eb05.1662017562.git.baolin.wang@linux.alibaba.com Fixes: 5480280d3f2d ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages") Signed-off-by: Baolin Wang Suggested-by: Mike Kravetz Reviewed-by: Mike Kravetz Cc: David Hildenbrand Cc: Muchun Song Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin [5.4: Fixup contextual diffs before pin_user_pages()] Signed-off-by: Samuel Mendoza-Jonas Signed-off-by: Greg Kroah-Hartman

x86/smpboot: Move rcu_cpu_starting() earlier

2022-12-19T11:24:15+00:00

commit 29368e09392123800e5e2bf0f3eda91f16972e52 upstream. The call to rcu_cpu_starting() in mtrr_ap_init() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: ============================= WARNING: suspicious RCU usage 5.9.0+ #268 Not tainted ----------------------------- kernel/kprobes.c:300 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0+ #268 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x77/0x97 __is_insn_slot_addr+0x15d/0x170 kernel_text_address+0xba/0xe0 ? get_stack_info+0x22/0xa0 __kernel_text_address+0x9/0x30 show_trace_log_lvl+0x17d/0x380 ? dump_stack+0x77/0x97 dump_stack+0x77/0x97 __lock_acquire+0xdf7/0x1bf0 lock_acquire+0x258/0x3d0 ? vprintk_emit+0x6d/0x2c0 _raw_spin_lock+0x27/0x40 ? vprintk_emit+0x6d/0x2c0 vprintk_emit+0x6d/0x2c0 printk+0x4d/0x69 start_secondary+0x1c/0x100 secondary_startup_64_no_verify+0xb8/0xbb This is avoided by moving the call to rcu_cpu_starting up near the beginning of the start_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Reported-by: Qian Cai Suggested-by: Peter Zijlstra Signed-off-by: Paul E. McKenney Cc: Joel Fernandes Signed-off-by: Greg Kroah-Hartman