kernel/linux.git, branch v5.4.19

Linux 5.4.19

2020-02-11T12:35:55+00:00

powerpc/kuap: Fix set direction in allow/prevent_user_access()

2020-02-11T12:35:55+00:00

[ Upstream commit 1d8f739b07bd538f272f60bf53f10e7e6248d295 ] __builtin_constant_p() always return 0 for pointers, so on RADIX we always end up opening both direction (by writing 0 in SPR29): 0000000000000170 <._copy_to_user>: ... 1b0: 4c 00 01 2c isync 1b4: 39 20 00 00 li r9,0 1b8: 7d 3d 03 a6 mtspr 29,r9 1bc: 4c 00 01 2c isync 1c0: 48 00 00 01 bl 1c0 <._copy_to_user+0x50> 1c0: R_PPC64_REL24 .__copy_tofrom_user ... 0000000000000220 <._copy_from_user>: ... 2ac: 4c 00 01 2c isync 2b0: 39 20 00 00 li r9,0 2b4: 7d 3d 03 a6 mtspr 29,r9 2b8: 4c 00 01 2c isync 2bc: 7f c5 f3 78 mr r5,r30 2c0: 7f 83 e3 78 mr r3,r28 2c4: 48 00 00 01 bl 2c4 <._copy_from_user+0xa4> 2c4: R_PPC64_REL24 .__copy_tofrom_user ... Use an explicit parameter for direction selection, so that GCC is able to see it is a constant: 00000000000001b0 <._copy_to_user>: ... 1f0: 4c 00 01 2c isync 1f4: 3d 20 40 00 lis r9,16384 1f8: 79 29 07 c6 rldicr r9,r9,32,31 1fc: 7d 3d 03 a6 mtspr 29,r9 200: 4c 00 01 2c isync 204: 48 00 00 01 bl 204 <._copy_to_user+0x54> 204: R_PPC64_REL24 .__copy_tofrom_user ... 0000000000000260 <._copy_from_user>: ... 2ec: 4c 00 01 2c isync 2f0: 39 20 ff ff li r9,-1 2f4: 79 29 00 04 rldicr r9,r9,0,0 2f8: 7d 3d 03 a6 mtspr 29,r9 2fc: 4c 00 01 2c isync 300: 7f c5 f3 78 mr r5,r30 304: 7f 83 e3 78 mr r3,r28 308: 48 00 00 01 bl 308 <._copy_from_user+0xa8> 308: R_PPC64_REL24 .__copy_tofrom_user ... Signed-off-by: Christophe Leroy [mpe: Spell out the directions, s/KUAP_R/KUAP_READ/ etc.] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/f4e88ec4941d5facb35ce75026b0112f980086c3.1579866752.git.christophe.leroy@c-s.fr Signed-off-by: Sasha Levin

regulator fix for "regulator: core: Add regulator_is_equal() helper"

2020-02-11T12:35:55+00:00

[ Upstream commit 0468e667a5bead9c1b7ded92861b5a98d8d78745 ] Signed-off-by: Stephen Rothwell Link: https://lore.kernel.org/r/20200115120258.0e535fcb@canb.auug.org.au Acked-by: Marek Vasut Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

rxrpc: Fix service call disconnection

2020-02-11T12:35:55+00:00

[ Upstream commit b39a934ec72fa2b5a74123891f25273a38378b90 ] The recent patch that substituted a flag on an rxrpc_call for the connection pointer being NULL as an indication that a call was disconnected puts the set_bit in the wrong place for service calls. This is only a problem if a call is implicitly terminated by a new call coming in on the same connection channel instead of a terminating ACK packet. In such a case, rxrpc_input_implicit_end_call() calls __rxrpc_disconnect_call(), which is now (incorrectly) setting the disconnection bit, meaning that when rxrpc_release_call() is later called, it doesn't call rxrpc_disconnect_call() and so the call isn't removed from the peer's error distribution list and the list gets corrupted. KASAN finds the issue as an access after release on a call, but the position at which it occurs is confusing as it appears to be related to a different call (the call site is where the latter call is being removed from the error distribution list and either the next or pprev pointer points to a previously released call). Fix this by moving the setting of the flag from __rxrpc_disconnect_call() to rxrpc_disconnect_call() in the same place that the connection pointer was being cleared. Fixes: 5273a191dca6 ("rxrpc: Fix NULL pointer deref due to call->conn being cleared on disconnect") Signed-off-by: David Howells Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

perf/core: Fix mlock accounting in perf_mmap()

2020-02-11T12:35:54+00:00

commit 003461559ef7a9bd0239bae35a22ad8924d6e9ad upstream. Decreasing sysctl_perf_event_mlock between two consecutive perf_mmap()s of a perf ring buffer may lead to an integer underflow in locked memory accounting. This may lead to the undesired behaviors, such as failures in BPF map creation. Address this by adjusting the accounting logic to take into account the possibility that the amount of already locked memory may exceed the current limit. Fixes: c4b75479741c ("perf/core: Make the mlock accounting simple again") Suggested-by: Alexander Shishkin Signed-off-by: Song Liu Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Ingo Molnar Cc: Acked-by: Alexander Shishkin Link: https://lkml.kernel.org/r/20200123181146.2238074-1-songliubraving@fb.com Signed-off-by: Greg Kroah-Hartman

clocksource: Prevent double add_timer_on() for watchdog_timer

2020-02-11T12:35:54+00:00

commit febac332a819f0e764aa4da62757ba21d18c182b upstream. Kernel crashes inside QEMU/KVM are observed: kernel BUG at kernel/time/timer.c:1154! BUG_ON(timer_pending(timer) || !timer->function) in add_timer_on(). At the same time another cpu got: general protection fault: 0000 [#1] SMP PTI of poinson pointer 0xdead000000000200 in: __hlist_del at include/linux/list.h:681 (inlined by) detach_timer at kernel/time/timer.c:818 (inlined by) expire_timers at kernel/time/timer.c:1355 (inlined by) __run_timers at kernel/time/timer.c:1686 (inlined by) run_timer_softirq at kernel/time/timer.c:1699 Unfortunately kernel logs are badly scrambled, stacktraces are lost. Printing the timer->function before the BUG_ON() pointed to clocksource_watchdog(). The execution of clocksource_watchdog() can race with a sequence of clocksource_stop_watchdog() .. clocksource_start_watchdog(): expire_timers() detach_timer(timer, true); timer->entry.pprev = NULL; raw_spin_unlock_irq(&base->lock); call_timer_fn clocksource_watchdog() clocksource_watchdog_kthread() or clocksource_unbind() spin_lock_irqsave(&watchdog_lock, flags); clocksource_stop_watchdog(); del_timer(&watchdog_timer); watchdog_running = 0; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock_irqsave(&watchdog_lock, flags); clocksource_start_watchdog(); add_timer_on(&watchdog_timer, ...); watchdog_running = 1; spin_unlock_irqrestore(&watchdog_lock, flags); spin_lock(&watchdog_lock); add_timer_on(&watchdog_timer, ...); BUG_ON(timer_pending(timer) || !timer->function); timer_pending() -> true BUG() I.e. inside clocksource_watchdog() watchdog_timer could be already armed. Check timer_pending() before calling add_timer_on(). This is sufficient as all operations are synchronized by watchdog_lock. Fixes: 75c5158f70c0 ("timekeeping: Update clocksource with stop_machine") Signed-off-by: Konstantin Khlebnikov Signed-off-by: Thomas Gleixner Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/158048693917.4378.13823603769948933793.stgit@buzz Signed-off-by: Greg Kroah-Hartman

x86/apic/msi: Plug non-maskable MSI affinity race

2020-02-11T12:35:54+00:00

commit 6f1a4891a5928a5969c87fa5a584844c983ec823 upstream. Evan tracked down a subtle race between the update of the MSI message and the device raising an interrupt internally on PCI devices which do not support MSI masking. The update of the MSI message is non-atomic and consists of either 2 or 3 sequential 32bit wide writes to the PCI config space. - Write address low 32bits - Write address high 32bits (If supported by device) - Write data When an interrupt is migrated then both address and data might change, so the kernel attempts to mask the MSI interrupt first. But for MSI masking is optional, so there exist devices which do not provide it. That means that if the device raises an interrupt internally between the writes then a MSI message is sent built from half updated state. On x86 this can lead to spurious interrupts on the wrong interrupt vector when the affinity setting changes both address and data. As a consequence the device interrupt can be lost causing the device to become stuck or malfunctioning. Evan tried to handle that by disabling MSI accross an MSI message update. That's not feasible because disabling MSI has issues on its own: If MSI is disabled the PCI device is routing an interrupt to the legacy INTx mechanism. The INTx delivery can be disabled, but the disablement is not working on all devices. Some devices lose interrupts when both MSI and INTx delivery are disabled. Another way to solve this would be to enforce the allocation of the same vector on all CPUs in the system for this kind of screwed devices. That could be done, but it would bring back the vector space exhaustion problems which got solved a few years ago. Fortunately the high address (if supported by the device) is only relevant when X2APIC is enabled which implies interrupt remapping. In the interrupt remapping case the affinity setting is happening at the interrupt remapping unit and the PCI MSI message is programmed only once when the PCI device is initialized. That makes it possible to solve it with a two step update: 1) Target the MSI msg to the new vector on the current target CPU 2) Target the MSI msg to the new vector on the new target CPU In both cases writing the MSI message is only changing a single 32bit word which prevents the issue of inconsistency. After writing the final destination it is necessary to check whether the device issued an interrupt while the intermediate state #1 (new vector, current CPU) was in effect. This is possible because the affinity change is always happening on the current target CPU. The code runs with interrupts disabled, so the interrupt can be detected by checking the IRR of the local APIC. If the vector is pending in the IRR then the interrupt is retriggered on the new target CPU by sending an IPI for the associated vector on the target CPU. This can cause spurious interrupts on both the local and the new target CPU. 1) If the new vector is not in use on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then interrupt entry code will ignore that spurious interrupt. The vector is marked so that the 'No irq handler for vector' warning is supressed once. 2) If the new vector is in use already on the local CPU then the IRR check might see an pending interrupt from the device which is using this vector. The IPI to the new target CPU will then invoke the handler of the device, which got the affinity change, even if that device did not issue an interrupt 3) If the new vector is in use already on the local CPU and the device affected by the affinity change raised an interrupt during the transitional state (step #1 above) then the handler of the device which uses that vector on the local CPU will be invoked. expose issues in device driver interrupt handlers which are not prepared to handle a spurious interrupt correctly. This not a regression, it's just exposing something which was already broken as spurious interrupts can happen for a lot of reasons and all driver handlers need to be able to deal with them. Reported-by: Evan Green Debugged-by: Evan Green Signed-off-by: Thomas Gleixner Tested-by: Evan Green Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87imkr4s7n.fsf@nanos.tec.linutronix.de Signed-off-by: Greg Kroah-Hartman

cifs: fail i/o on soft mounts if sessionsetup errors out

2020-02-11T12:35:54+00:00

commit b0dd940e582b6a60296b9847a54012a4b080dc72 upstream. RHBZ: 1579050 If we have a soft mount we should fail commands for session-setup failures (such as the password having changed/ account being deleted/ ...) and return an error back to the application. Signed-off-by: Ronnie Sahlberg Signed-off-by: Steve French CC: Stable Signed-off-by: Greg Kroah-Hartman

KVM: Play nice with read-only memslots when querying host page size

2020-02-11T12:35:54+00:00

[ Upstream commit 42cde48b2d39772dba47e680781a32a6c4b7dc33 ] Avoid the "writable" check in __gfn_to_hva_many(), which will always fail on read-only memslots due to gfn_to_hva() assuming writes. Functionally, this allows x86 to create large mappings for read-only memslots that are backed by HugeTLB mappings. Note, the changelog for commit 05da45583de9 ("KVM: MMU: large page support") states "If the largepage contains write-protected pages, a large pte is not used.", but "write-protected" refers to pages that are temporarily read-only, e.g. read-only memslots didn't even exist at the time. Fixes: 4d8b81abc47b ("KVM: introduce readonly memslot") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson [Redone using kvm_vcpu_gfn_to_memslot_prot. - Paolo] Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

KVM: Use vcpu-specific gva->hva translation when querying host page size

2020-02-11T12:35:54+00:00

[ Upstream commit f9b84e19221efc5f493156ee0329df3142085f28 ] Use kvm_vcpu_gfn_to_hva() when retrieving the host page size so that the correct set of memslots is used when handling x86 page faults in SMM. Fixes: 54bf36aac520 ("KVM: x86: use vcpu-specific functions to read/write/translate GFNs") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin