kernel/linux.git, branch v5.2.19

Linux 5.2.19

2019-10-05T11:14:17+00:00

platform/chrome: cros_ec_rpmsg: Fix race with host command when probe failed

2019-10-05T11:14:17+00:00

[ Upstream commit 71cddb7097e2b0feb855d7fd7d59afd12cbee4bb ] Since the rpmsg_endpoint is created before probe is called, it's possible that a host event is received during cros_ec_register, and there would be some pending work in the host_event_work workqueue while cros_ec_register is called. If cros_ec_register fails, when the leftover work in host_event_work run, the ec_dev from the drvdata of the rpdev could be already set to NULL, causing kernel crash when trying to run cros_ec_get_next_event. Fix this by creating the rpmsg_endpoint by ourself, and when cros_ec_register fails (or on remove), destroy the endpoint first (to make sure there's no more new calls to cros_ec_rpmsg_callback), and then cancel all works in the host_event_work workqueue. Cc: stable@vger.kernel.org Fixes: 2de89fd98958 ("platform/chrome: cros_ec: Add EC host command support using rpmsg") Signed-off-by: Pi-Hsun Shih Signed-off-by: Enric Balletbo i Serra Signed-off-by: Sasha Levin

mt76: mt7615: fix mt7615 firmware path definitions

2019-10-05T11:14:17+00:00

[ Upstream commit 9d4d0d06bbf9f7e576b0ebbb2f77672d0fc7f503 ] mt7615 patch/n9/cr4 firmwares are available in mediatek folder in linux-firmware repository. Because of this mt7615 won't work on regular distributions like Ubuntu. Fix path definitions. Moreover remove useless firmware name pointers and use definitions directly Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Bianconi Signed-off-by: Kalle Valo Signed-off-by: Sasha Levin

mt76: mt7615: always release sem in mt7615_load_patch

2019-10-05T11:14:17+00:00

[ Upstream commit 2fc446487c364bf8bbd5f8f5f27e52d914fa1d72 ] Release patch semaphore even if request_firmware fails in mt7615_load_patch Signed-off-by: Lorenzo Bianconi Signed-off-by: Felix Fietkau Signed-off-by: Sasha Levin

md/raid0: avoid RAID0 data corruption due to layout confusion.

2019-10-05T11:14:16+00:00

[ Upstream commit c84a1372df929033cb1a0441fb57bd3932f39ac9 ] If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable@vger.kernel.org (3.14+) Acked-by: Guoqing Jiang Signed-off-by: NeilBrown Signed-off-by: Song Liu Signed-off-by: Sasha Levin

drm/amd/display: Restore backlight brightness after system resume

2019-10-05T11:14:16+00:00

commit bb264220d9316f6bd7c1fd84b8da398c93912931 upstream. Laptops with AMD APU doesn't restore display backlight brightness after system resume. This issue started when DC was introduced. Let's use BL_CORE_SUSPENDRESUME so the backlight core calls update_status callback after system resume to restore the backlight level. Tested on Dell Inspiron 3180 (Stoney Ridge) and Dell Latitude 5495 (Raven Ridge). Cc: Signed-off-by: Kai-Heng Feng Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

CIFS: Fix oplock handling for SMB 2.1+ protocols

2019-10-05T11:14:16+00:00

commit a016e2794fc3a245a91946038dd8f34d65e53cc3 upstream. There may be situations when a server negotiates SMB 2.1 protocol version or higher but responds to a CREATE request with an oplock rather than a lease. Currently the client doesn't handle such a case correctly: when another CREATE comes in the server sends an oplock break to the initial CREATE and the client doesn't send an ack back due to a wrong caching level being set (READ instead of RWH). Missing an oplock break ack makes the server wait until the break times out which dramatically increases the latency of the second CREATE. Fix this by properly detecting oplocks when using SMB 2.1 protocol version and higher. Cc: Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French Reviewed-by: Ronnie Sahlberg Signed-off-by: Greg Kroah-Hartman

CIFS: fix max ea value size

2019-10-05T11:14:16+00:00

commit 63d37fb4ce5ae7bf1e58f906d1bf25f036fe79b2 upstream. It should not be larger then the slab max buf size. If user specifies a larger size, it passes this check and goes straightly to SMB2_set_info_init performing an insecure memcpy. Signed-off-by: Murphy Zhou Reviewed-by: Aurelien Aptel CC: Stable Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman

i2c: riic: Clear NACK in tend isr

2019-10-05T11:14:16+00:00

commit a71e2ac1f32097fbb2beab098687a7a95c84543e upstream. The NACKF flag should be cleared in INTRIICNAKI interrupt processing as description in HW manual. This issue shows up quickly when PREEMPT_RT is applied and a device is probed that is not plugged in (like a touchscreen controller). The result is endless interrupts that halt system boot. Fixes: 310c18a41450 ("i2c: riic: add driver") Cc: stable@vger.kernel.org Reported-by: Chien Nguyen Signed-off-by: Chris Brandt Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

hwrng: core - don't wait on add_early_randomness()

2019-10-05T11:14:16+00:00

commit 78887832e76541f77169a24ac238fccb51059b63 upstream. add_early_randomness() is called by hwrng_register() when the hardware is added. If this hardware and its module are present at boot, and if there is no data available the boot hangs until data are available and can't be interrupted. For instance, in the case of virtio-rng, in some cases the host can be not able to provide enough entropy for all the guests. We can have two easy ways to reproduce the problem but they rely on misconfiguration of the hypervisor or the egd daemon: - if virtio-rng device is configured to connect to the egd daemon of the host but when the virtio-rng driver asks for data the daemon is not connected, - if virtio-rng device is configured to connect to the egd daemon of the host but the egd daemon doesn't provide data. The guest kernel will hang at boot until the virtio-rng driver provides enough data. To avoid that, call rng_get_data() in non-blocking mode (wait=0) from add_early_randomness(). Signed-off-by: Laurent Vivier Fixes: d9e797261933 ("hwrng: add randomness to system from rng...") Cc: Reviewed-by: Theodore Ts'o Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman