kernel/linux.git, branch v5.16.10

Linux 5.16.10

2022-02-16T11:58:51+00:00

Link: https://lore.kernel.org/r/20220214092510.221474733@linuxfoundation.org Tested-by: Jeffrin Jose T Tested-by: Jon Hunter Tested-by: Ronald Warsow Tested-by: Fox Chen Tested-by: Linux Kernel Functional Testing Tested-by: Rudi Heitbaum Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Slade Watkins Tested-by: Guenter Roeck Tested-by: Zan Aziz Tested-by: Ron Economos Tested-by: Bagas Sanjaya Tested-by: Scott Bruce Tested-by: Justin M. Forbes Signed-off-by: Greg Kroah-Hartman

iommu: Fix potential use-after-free during probe

2022-02-16T11:58:51+00:00

commit b54240ad494300ff0994c4539a531727874381f4 upstream. Kasan has reported the following use after free on dev->iommu. when a device probe fails and it is in process of freeing dev->iommu in dev_iommu_free function, a deferred_probe_work_func runs in parallel and tries to access dev->iommu->fwspec in of_iommu_configure path thus causing use after free. BUG: KASAN: use-after-free in of_iommu_configure+0xb4/0x4a4 Read of size 8 at addr ffffff87a2f1acb8 by task kworker/u16:2/153 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace+0x0/0x33c show_stack+0x18/0x24 dump_stack_lvl+0x16c/0x1e0 print_address_description+0x84/0x39c __kasan_report+0x184/0x308 kasan_report+0x50/0x78 __asan_load8+0xc0/0xc4 of_iommu_configure+0xb4/0x4a4 of_dma_configure_id+0x2fc/0x4d4 platform_dma_configure+0x40/0x5c really_probe+0x1b4/0xb74 driver_probe_device+0x11c/0x228 __device_attach_driver+0x14c/0x304 bus_for_each_drv+0x124/0x1b0 __device_attach+0x25c/0x334 device_initial_probe+0x24/0x34 bus_probe_device+0x78/0x134 deferred_probe_work_func+0x130/0x1a8 process_one_work+0x4c8/0x970 worker_thread+0x5c8/0xaec kthread+0x1f8/0x220 ret_from_fork+0x10/0x18 Allocated by task 1: ____kasan_kmalloc+0xd4/0x114 __kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0xe4/0x3d4 __iommu_probe_device+0x90/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Freed by task 1: kasan_set_track+0x4c/0x84 kasan_set_free_info+0x28/0x4c ____kasan_slab_free+0x120/0x15c __kasan_slab_free+0x18/0x28 slab_free_freelist_hook+0x204/0x2fc kfree+0xfc/0x3a4 __iommu_probe_device+0x284/0x394 probe_iommu_group+0x70/0x9c bus_for_each_dev+0x11c/0x19c bus_iommu_probe+0xb8/0x7d4 bus_set_iommu+0xcc/0x13c arm_smmu_bus_init+0x44/0x130 [arm_smmu] arm_smmu_device_probe+0xb88/0xc54 [arm_smmu] platform_drv_probe+0xe4/0x13c really_probe+0x2c8/0xb74 driver_probe_device+0x11c/0x228 device_driver_attach+0xf0/0x16c __driver_attach+0x80/0x320 bus_for_each_dev+0x11c/0x19c driver_attach+0x38/0x48 bus_add_driver+0x1dc/0x3a4 driver_register+0x18c/0x244 __platform_driver_register+0x88/0x9c init_module+0x64/0xff4 [arm_smmu] do_one_initcall+0x17c/0x2f0 do_init_module+0xe8/0x378 load_module+0x3f80/0x4a40 __se_sys_finit_module+0x1a0/0x1e4 __arm64_sys_finit_module+0x44/0x58 el0_svc_common+0x100/0x264 do_el0_svc+0x38/0xa4 el0_svc+0x20/0x30 el0_sync_handler+0x68/0xac el0_sync+0x160/0x180 Fix this by setting dev->iommu to NULL first and then freeing dev_iommu structure in dev_iommu_free function. Suggested-by: Robin Murphy Signed-off-by: Vijayanand Jitta Link: https://lore.kernel.org/r/1643613155-20215-1-git-send-email-quic_vjitta@quicinc.com Signed-off-by: Joerg Roedel Signed-off-by: Greg Kroah-Hartman

docs/ABI: testing: aspeed-uart-routing: Escape asterisk

2022-02-16T11:58:50+00:00

commit 088400521e421a1df7d0128dc0f9246db4ef1c7c upstream. Escape asterisk symbols to fix the following warning: "WARNING: Inline emphasis start-string without end-string" Fixes: c6807970c3bc ("soc: aspeed: Add UART routing support") Reported-by: Stephen Rothwell Signed-off-by: Chia-Wei Wang Signed-off-by: Joel Stanley Link: https://lore.kernel.org/r/20220124014351.9121-1-chiawei_wang@aspeedtech.com Link: https://lore.kernel.org/r/20220201070027.196314-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

kconfig: fix missing fclose() on error paths

2022-02-16T11:58:50+00:00

commit d23a0c3718222a42430fd56359478a6fc7675070 upstream. The file is not closed when ferror() fails. Fixes: 00d674cb3536 ("kconfig: refactor conf_write_dep()") Fixes: 57ddd07c4560 ("kconfig: refactor conf_write_autoconf()") Reported-by: Ryan Cai Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman

perf: Fix list corruption in perf_cgroup_switch()

2022-02-16T11:58:50+00:00

commit 5f4e5ce638e6a490b976ade4a40017b40abb2da0 upstream. There's list corruption on cgrp_cpuctx_list. This happens on the following path: perf_cgroup_switch: list_for_each_entry(cgrp_cpuctx_list) cpu_ctx_sched_in ctx_sched_in ctx_pinned_sched_in merge_sched_in perf_cgroup_event_disable: remove the event from the list Use list_for_each_entry_safe() to allow removing an entry during iteration. Fixes: 058fe1c0440e ("perf/core: Make cgroup switch visit only cpuctxs with cgroup events") Signed-off-by: Song Liu Reviewed-by: Rik van Riel Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20220204004057.2961252-1-song@kernel.org Signed-off-by: Greg Kroah-Hartman

arm64: dts: imx8mq: fix lcdif port node

2022-02-16T11:58:50+00:00

commit 91f6d5f181f6629dd74ab71759fe92d3f4eff966 upstream. The port node does not have a unit-address, remove it. This fixes the warnings: lcd-controller@30320000: 'port' is a required property lcd-controller@30320000: 'port@0' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller") Signed-off-by: Alexander Stein Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

MIPS: octeon: Fix missed PTR->PTR_WD conversion

2022-02-16T11:58:50+00:00

commit 50317b636e7184d15126e2dfc83db0963a38d31e upstream. Fixes: fa62f39dc7e2 ("MIPS: Fix build error due to PTR used in more places") Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Reduce log messages seen after firmware download

2022-02-16T11:58:49+00:00

commit 5852ed2a6a39c862c8a3fdf646e1f4e01b91d710 upstream. Messages around firmware download were incorrectly tagged as being related to discovery trace events. Thus, firmware download status ended up dumping the trace log as well as the firmware update message. As there were a couple of log messages in this state, the trace log was dumped multiple times. Resolve this by converting from trace events to SLI events. Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com Reviewed-by: Ewan D. Milne Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled

2022-02-16T11:58:49+00:00

commit c80b27cfd93ba9f5161383f798414609e84729f3 upstream. The driver is initiating NVMe PRLIs to determine device NVMe support. This should not be occurring if CONFIG_NVME_FC support is disabled. Correct this by changing the default value for FC4 support. Currently it defaults to FCP and NVMe. With change, when NVME_FC support is not enabled in the kernel, the default value is just FCP. Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com Reviewed-by: Ewan D. Milne Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

Makefile.extrawarn: Move -Wunaligned-access to W=1

2022-02-16T11:58:49+00:00

commit 1cf5f151d25fcca94689efd91afa0253621fb33a upstream. -Wunaligned-access is a new warning in clang that is default enabled for arm and arm64 under certain circumstances within the clang frontend (see LLVM commit below). On v5.17-rc2, an ARCH=arm allmodconfig build shows 1284 total/70 unique instances of this warning (most of the instances are in header files), which is quite noisy. To keep a normal build green through CONFIG_WERROR, only show this warning with W=1, which will allow automated build systems to catch new instances of the warning so that the total number can be driven down to zero eventually since catching unaligned accesses at compile time would be generally useful. Cc: stable@vger.kernel.org Link: https://github.com/llvm/llvm-project/commit/35737df4dcd28534bd3090157c224c19b501278a Link: https://github.com/ClangBuiltLinux/linux/issues/1569 Link: https://github.com/ClangBuiltLinux/linux/issues/1576 Signed-off-by: Nathan Chancellor Reviewed-by: Nick Desaulniers Signed-off-by: Masahiro Yamada Signed-off-by: Greg Kroah-Hartman