kernel/linux.git, branch v5.15.42

Linux 5.15.42

2022-05-25T07:57:37+00:00

Link: https://lore.kernel.org/r/20220523165823.492309987@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Fox Chen Tested-by: Sudip Mukherjee Tested-by: Ron Economos Tested-by: Guenter Roeck Tested-by: Khalid Masum Signed-off-by: Greg Kroah-Hartman

afs: Fix afs_getattr() to refetch file status if callback break occurred

2022-05-25T07:57:37+00:00

[ Upstream commit 2aeb8c86d49967552394d5e723f87454cb53f501 ] If a callback break occurs (change notification), afs_getattr() needs to issue an FS.FetchStatus RPC operation to update the status of the file being examined by the stat-family of system calls. Fix afs_getattr() to do this if AFS_VNODE_CB_PROMISED has been cleared on a vnode by a callback break. Skip this if AT_STATX_DONT_SYNC is set. This can be tested by appending to a file on one AFS client and then using "stat -L" to examine its length on a machine running kafs. This can also be watched through tracing on the kafs machine. The callback break is seen: kworker/1:1-46 [001] ..... 978.910812: afs_cb_call: c=0000005f YFSCB.CallBack kworker/1:1-46 [001] ...1. 978.910829: afs_cb_break: 100058:23b4c:242d2c2 b=2 s=1 break-cb kworker/1:1-46 [001] ..... 978.911062: afs_call_done: c=0000005f ret=0 ab=0 [0000000082994ead] And then the stat command generated no traffic if unpatched, but with this change a call to fetch the status can be observed: stat-4471 [000] ..... 986.744122: afs_make_fs_call: c=000000ab 100058:023b4c:242d2c2 YFS.FetchStatus stat-4471 [000] ..... 986.745578: afs_call_done: c=000000ab ret=0 ab=0 [0000000087fc8c84] Fixes: 08e0e7c82eea ("[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC.") Reported-by: Markus Suvanto Signed-off-by: David Howells cc: Marc Dionne cc: linux-afs@lists.infradead.org Tested-by: Markus Suvanto Tested-by: kafs-testing+fedora34_64checkkafs-build-496@auristor.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216010 Link: https://lore.kernel.org/r/165308359800.162686.14122417881564420962.stgit@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

i2c: mt7621: fix missing clk_disable_unprepare() on error in mtk_i2c_probe()

2022-05-25T07:57:37+00:00

[ Upstream commit a2537c98a8a3b57002e54a262d180b9490bc7190 ] Fix the missing clk_disable_unprepare() before return from mtk_i2c_probe() in the error handling case. Fixes: d04913ec5f89 ("i2c: mt7621: Add MediaTek MT7621/7628/7688 I2C driver") Signed-off-by: Yang Yingliang Reviewed-by: Stefan Roese Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin

lockdown: also lock down previous kgdb use

2022-05-25T07:57:37+00:00

commit eadb2f47a3ced5c64b23b90fd2a3463f63726066 upstream. KGDB and KDB allow read and write access to kernel memory, and thus should be restricted during lockdown. An attacker with access to a serial port (for example, via a hypervisor console, which some cloud vendors provide over the network) could trigger the debugger so it is important that the debugger respect the lockdown mode when/if it is triggered. Fix this by integrating lockdown into kdb's existing permissions mechanism. Unfortunately kgdb does not have any permissions mechanism (although it certainly could be added later) so, for now, kgdb is simply and brutally disabled by immediately exiting the gdb stub without taking any action. For lockdowns established early in the boot (e.g. the normal case) then this should be fine but on systems where kgdb has set breakpoints before the lockdown is enacted than "bad things" will happen. CVE: CVE-2022-21499 Co-developed-by: Stephen Brennan Signed-off-by: Stephen Brennan Reviewed-by: Douglas Anderson Signed-off-by: Daniel Thompson Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mt76: mt7921e: fix possible probe failure after reboot

2022-05-25T07:57:36+00:00

commit 602cc0c9618a819ab00ea3c9400742a0ca318380 upstream. It doesn't guarantee the mt7921e gets started with ASPM L0 after each machine reboot on every platform. If mt7921e gets started with not ASPM L0, it would be possible that the driver encounters time to time failure in mt7921_pci_probe, like a weird chip identifier is read [ 215.514503] mt7921e 0000:05:00.0: ASIC revision: feed0000 [ 216.604741] mt7921e: probe of 0000:05:00.0 failed with error -110 or failing to init hardware because the driver is not allowed to access the register until the device is in ASPM L0 state. So, we call __mt7921e_mcu_drv_pmctrl in early mt7921_pci_probe to force the device to bring back to the L0 state for we can safely access registers in any case. In the patch, we move all functions from dma.c to pci.c and register mt76 bus operation earilier, that is the __mt7921e_mcu_drv_pmctrl depends on. Fixes: bf3747ae2e25 ("mt76: mt7921: enable aspm by default") Reported-by: Kai-Chuan Hsieh Co-developed-by: Deren Wu Signed-off-by: Deren Wu Signed-off-by: Sean Wang Signed-off-by: Felix Fietkau Signed-off-by: Joakim Tjernlund Signed-off-by: Greg Kroah-Hartman

dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group

2022-05-25T07:57:36+00:00

commit a29c96a4053dc3c1d39353b61089882f81c6b23d upstream. FWQSPID is not a group of FWSPID so remove it. Fixes: 7488838f2315 ("dt-bindings: pinctrl: aspeed: Document AST2600 pinmux") Signed-off-by: Jae Hyun Yoo Acked-by: Rob Herring Reviewed-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220329173932.2588289-4-quic_jaehyoo@quicinc.com Signed-off-by: Joel Stanley Signed-off-by: Greg Kroah-Hartman

Input: ili210x - fix reset timing

2022-05-25T07:57:36+00:00

commit e4920d42ce0e9c8aafb7f64b6d9d4ae02161e51e upstream. According to Ilitek "231x & ILI251x Programming Guide" Version: 2.30 "2.1. Power Sequence", "T4 Chip Reset and discharge time" is minimum 10ms and "T2 Chip initial time" is maximum 150ms. Adjust the reset timings such that T4 is 12ms and T2 is 160ms to fit those figures. This prevents sporadic touch controller start up failures when some systems with at least ILI251x controller boot, without this patch the systems sometimes fail to communicate with the touch controller. Fixes: 201f3c803544c ("Input: ili210x - add reset GPIO support") Signed-off-by: Marek Vasut Link: https://lore.kernel.org/r/20220518204901.93534-1-marex@denx.de Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs

2022-05-25T07:57:36+00:00

[ Upstream commit 51f559d66527e238f9a5f82027bff499784d4eac ] Add KRYO4XX gold/big cores to the list of CPUs that need the repeat TLBI workaround. Apply this to the affected KRYO4XX cores (rcpe to rfpe). The variant and revision bits are implementation defined and are different from the their Cortex CPU counterparts on which they are based on, i.e., (r0p0 to r3p0) is equivalent to (rcpe to rfpe). Signed-off-by: Shreyas K K Reviewed-by: Sai Prakash Ranjan Link: https://lore.kernel.org/r/20220512110134.12179-1-quic_shrekk@quicinc.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

net: atlantic: verify hw_head_ lies within TX buffer ring

2022-05-25T07:57:36+00:00

[ Upstream commit 2120b7f4d128433ad8c5f503a9584deba0684901 ] Bounds check hw_head index provided by NIC to verify it lies within the TX buffer ring. Reported-by: Aashay Shringarpure Reported-by: Yi Chou Reported-by: Shervin Oloumi Signed-off-by: Grant Grundler Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: atlantic: add check for MAX_SKB_FRAGS

2022-05-25T07:57:36+00:00

[ Upstream commit 6aecbba12b5c90b26dc062af3b9de8c4b3a2f19f ] Enforce that the CPU can not get stuck in an infinite loop. Reported-by: Aashay Shringarpure Reported-by: Yi Chou Reported-by: Shervin Oloumi Signed-off-by: Grant Grundler Signed-off-by: David S. Miller Signed-off-by: Sasha Levin