kernel/linux.git, branch v5.15.126

Linux 5.15.126

2023-08-11T13:14:00+00:00

Link: https://lore.kernel.org/r/20230809103633.485906560@linuxfoundation.org Tested-by: SeongJae Park Tested-by: Harshit Mogalapalli Tested-by: Ron Economos Signed-off-by: Greg Kroah-Hartman

PM: sleep: wakeirq: fix wake irq arming

2023-08-11T13:14:00+00:00

[ Upstream commit 8527beb12087238d4387607597b4020bc393c4b4 ] The decision whether to enable a wake irq during suspend can not be done based on the runtime PM state directly as a driver may use wake irqs without implementing runtime PM. Such drivers specifically leave the state set to the default 'suspended' and the wake irq is thus never enabled at suspend. Add a new wake irq flag to track whether a dedicated wake irq has been enabled at runtime suspend and therefore must not be enabled at system suspend. Note that pm_runtime_enabled() can not be used as runtime PM is always disabled during late suspend. Fixes: 69728051f5bf ("PM / wakeirq: Fix unbalanced IRQ enable for wakeirq") Cc: 4.16+ # 4.16+ Signed-off-by: Johan Hovold Reviewed-by: Tony Lindgren Tested-by: Tony Lindgren Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM / wakeirq: support enabling wake-up irq after runtime_suspend called

2023-08-11T13:14:00+00:00

[ Upstream commit 259714100d98b50bf04d36a21bf50ca8b829fc11 ] When the dedicated wake IRQ is level trigger, and it uses the device's low-power status as the wakeup source, that means if the device is not in low-power state, the wake IRQ will be triggered if enabled; For this case, need enable the wake IRQ after running the device's ->runtime_suspend() which make it enter low-power state. e.g. Assume the wake IRQ is a low level trigger type, and the wakeup signal comes from the low-power status of the device. The wakeup signal is low level at running time (0), and becomes high level when the device enters low-power state (runtime_suspend (1) is called), a wakeup event at (2) make the device exit low-power state, then the wakeup signal also becomes low level. ------------------ | ^ ^| ---------------- | | -------------- |<---(0)--->|<--(1)--| (3) (2) (4) if enable the wake IRQ before running runtime_suspend during (0), a wake IRQ will arise, it causes resume immediately; it works if enable wake IRQ ( e.g. at (3) or (4)) after running ->runtime_suspend(). This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to optionally support enabling wake IRQ after running ->runtime_suspend(). Suggested-by: Rafael J. Wysocki Signed-off-by: Chunfeng Yun Signed-off-by: Rafael J. Wysocki Stable-dep-of: 8527beb12087 ("PM: sleep: wakeirq: fix wake irq arming") Signed-off-by: Sasha Levin

soundwire: fix enumeration completion

2023-08-11T13:14:00+00:00

[ Upstream commit c40d6b3249b11d60e09d81530588f56233d9aa44 ] The soundwire subsystem uses two completion structures that allow drivers to wait for soundwire device to become enumerated on the bus and initialised by their drivers, respectively. The code implementing the signalling is currently broken as it does not signal all current and future waiters and also uses the wrong reinitialisation function, which can potentially lead to memory corruption if there are still waiters on the queue. Not signalling future waiters specifically breaks sound card probe deferrals as codec drivers can not tell that the soundwire device is already attached when being reprobed. Some codec runtime PM implementations suffer from similar problems as waiting for enumeration during resume can also timeout despite the device already having been enumerated. Fixes: fb9469e54fa7 ("soundwire: bus: fix race condition with enumeration_complete signaling") Fixes: a90def068127 ("soundwire: bus: fix race condition with initialization_complete signaling") Cc: stable@vger.kernel.org # 5.7 Cc: Pierre-Louis Bossart Cc: Rander Wang Signed-off-by: Johan Hovold Reviewed-by: Pierre-Louis Bossart Link: https://lore.kernel.org/r/20230705123018.30903-2-johan+linaro@kernel.org Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: bus: pm_runtime_request_resume on peripheral attachment

2023-08-11T13:14:00+00:00

[ Upstream commit e557bca49b812908f380c56b5b4b2f273848b676 ] In typical use cases, the peripheral becomes pm_runtime active as a result of the ALSA/ASoC framework starting up a DAI. The parent/child hierarchy guarantees that the manager device will be fully resumed beforehand. There is however a corner case where the manager device may become pm_runtime active, but without ALSA/ASoC requesting any functionality from the peripherals. In this case, the hardware peripheral device will report as ATTACHED and its initialization routine will be executed. If this initialization routine initiates any sort of deferred processing, there is a possibility that the manager could suspend without the peripheral suspend sequence being invoked: from the pm_runtime framework perspective, the peripheral is *already* suspended. To avoid such disconnects between hardware state and pm_runtime state, this patch adds an asynchronous pm_request_resume() upon successful attach/initialization which will result in the proper resume/suspend sequence to be followed on the peripheral side. BugLink: https://github.com/thesofproject/linux/issues/3459 Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Reviewed-by: Rander Wang Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20220420023241.14335-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Stable-dep-of: c40d6b3249b1 ("soundwire: fix enumeration completion") Signed-off-by: Sasha Levin

selftests/rseq: Play nice with binaries statically linked against glibc 2.35+

2023-08-11T13:14:00+00:00

[ Upstream commit 3bcbc20942db5d738221cca31a928efc09827069 ] To allow running rseq and KVM's rseq selftests as statically linked binaries, initialize the various "trampoline" pointers to point directly at the expect glibc symbols, and skip the dlysm() lookups if the rseq size is non-zero, i.e. the binary is statically linked *and* the libc registered its own rseq. Define weak versions of the symbols so as not to break linking against libc versions that don't support rseq in any capacity. The KVM selftests in particular are often statically linked so that they can be run on targets with very limited runtime environments, i.e. test machines. Fixes: 233e667e1ae3 ("selftests/rseq: Uplift rseq selftests for compatibility with glibc-2.35") Cc: Aaron Lewis Cc: kvm@vger.kernel.org Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20230721223352.2333911-1-seanjc@google.com> Signed-off-by: Paolo Bonzini Signed-off-by: Sasha Levin

selftests/rseq: check if libc rseq support is registered

2023-08-11T13:13:59+00:00

[ Upstream commit d1a997ba4c1bf65497d956aea90de42a6398f73a ] When checking for libc rseq support in the library constructor, don't only depend on the symbols presence, check that the registration was completed. This targets a scenario where the libc has rseq support but it is not wired for the current architecture in 'bits/rseq.h', we want to fallback to our internal registration mechanism. Signed-off-by: Michael Jeanson Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Mathieu Desnoyers Link: https://lore.kernel.org/r/20220614154830.1367382-4-mjeanson@efficios.com Stable-dep-of: 3bcbc20942db ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+") Signed-off-by: Sasha Levin

drm/imx/ipuv3: Fix front porch adjustment upon hactive aligning

2023-08-11T13:13:59+00:00

[ Upstream commit ee31742bf17636da1304af77b2cb1c29b5dda642 ] When hactive is not aligned to 8 pixels, it is aligned accordingly and hfront porch needs to be reduced the same amount. Unfortunately the front porch is set to the difference rather than reducing it. There are some Samsung TVs which can't cope with a front porch of instead of 70. Fixes: 94dfec48fca7 ("drm/imx: Add 8 pixel alignment fix") Signed-off-by: Alexander Stein Reviewed-by: Philipp Zabel Link: https://lore.kernel.org/r/20230515072137.116211-1-alexander.stein@ew.tq-group.com [p.zabel@pengutronix.de: Fixed subject] Signed-off-by: Philipp Zabel Link: https://patchwork.freedesktop.org/patch/msgid/20230515072137.116211-1-alexander.stein@ew.tq-group.com Signed-off-by: Sasha Levin

powerpc/mm/altmap: Fix altmap boundary check

2023-08-11T13:13:59+00:00

[ Upstream commit 6722b25712054c0f903b839b8f5088438dd04df3 ] altmap->free includes the entire free space from which altmap blocks can be allocated. So when checking whether the kernel is doing altmap block free, compute the boundary correctly, otherwise memory hotunplug can fail. Fixes: 9ef34630a461 ("powerpc/mm: Fallback to RAM if the altmap is unusable") Signed-off-by: "Aneesh Kumar K.V" Reviewed-by: David Hildenbrand Signed-off-by: Michael Ellerman Link: https://msgid.link/20230724181320.471386-1-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin

mtd: rawnand: fsl_upm: Fix an off-by one test in fun_exec_op()

2023-08-11T13:13:59+00:00

[ Upstream commit c6abce60338aa2080973cd95be0aedad528bb41f ] 'op-cs' is copied in 'fun->mchip_number' which is used to access the 'mchip_offsets' and the 'rnb_gpio' arrays. These arrays have NAND_MAX_CHIPS elements, so the index must be below this limit. Fix the sanity check in order to avoid the NAND_MAX_CHIPS value. This would lead to out-of-bound accesses. Fixes: 54309d657767 ("mtd: rawnand: fsl_upm: Implement exec_op()") Signed-off-by: Christophe JAILLET Reviewed-by: Dan Carpenter Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/cd01cba1c7eda58bdabaae174c78c067325803d2.1689803636.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin