kernel/linux.git, branch v5.14.8

Linux 5.14.8

2021-09-26T12:10:25+00:00

Link: https://lore.kernel.org/r/20210924124341.214446495@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Fox Chen Tested-by: Shuah Khan Tested-by: Salvatore Bonaccorso Link: https://lore.kernel.org/r/20210925120755.238551529@linuxfoundation.org Tested-by: Fox Chen Tested-by: Guenter Roeck Tested-by: Rudi Heitbaum Signed-off-by: Greg Kroah-Hartman

drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV

2021-09-26T12:10:25+00:00

commit e8f71f89236ef82d449991bfbc237e3cb6ea584f upstream. nvkm test builds fail with the following error. drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c: In function 'nvkm_control_mthd_pstate_info': drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c:60:35: error: overflow in conversion from 'int' to '__s8' {aka 'signed char'} changes value from '-251' to '5' The code builds on most architectures, but fails on parisc where ENOSYS is defined as 251. Replace the error code with -ENODEV (-19). The actual error code does not really matter and is not passed to userspace - it just has to be negative. Fixes: 7238eca4cf18 ("drm/nouveau: expose pstate selection per-power source in sysfs") Signed-off-by: Guenter Roeck Cc: Ben Skeggs Cc: David Airlie Cc: Daniel Vetter Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

selinux,smack: fix subjective/objective credential use mixups

2021-09-26T12:10:25+00:00

commit a3727a8bac0a9e77c70820655fd8715523ba3db7 upstream. Jann Horn reported a problem with commit eb1231f73c4d ("selinux: clarify task subjective and objective credentials") where some LSM hooks were attempting to access the subjective credentials of a task other than the current task. Generally speaking, it is not safe to access another task's subjective credentials and doing so can cause a number of problems. Further, while looking into the problem, I realized that Smack was suffering from a similar problem brought about by a similar commit 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials"). This patch addresses this problem by restoring the use of the task's objective credentials in those cases where the task is other than the current executing task. Not only does this resolve the problem reported by Jann, it is arguably the correct thing to do in these cases. Cc: stable@vger.kernel.org Fixes: eb1231f73c4d ("selinux: clarify task subjective and objective credentials") Fixes: 1fb057dcde11 ("smack: differentiate between subjective and objective task credentials") Reported-by: Jann Horn Acked-by: Eric W. Biederman Acked-by: Casey Schaufler Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman

io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT

2021-09-26T12:10:25+00:00

[ Upstream commit 32c2d33e0b7c4ea53284d5d9435dd022b582c8cf ] Build check of __REQ_F_LAST_BIT should be larger than, not equal or larger than. It's perfectly valid to have __REQ_F_LAST_BIT be 32, as that means that the last valid bit is 31 which does fit in the type. Signed-off-by: Hao Xu Link: https://lore.kernel.org/r/20210907032243.114190-1-haoxu@linux.alibaba.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

cifs: properly invalidate cached root handle when closing it

2021-09-26T12:10:25+00:00

[ Upstream commit 9351590f51cdda49d0265932a37f099950998504 ] Cached root file was not being completely invalidated sometimes. Reproducing: - With a DFS share with 2 targets, one disabled and one enabled - start some I/O on the mount # while true; do ls /mnt/dfs; done - at the same time, disable the enabled target and enable the disabled one - wait for DFS cache to expire - on reconnect, the previous cached root handle should be invalid, but open_cached_dir_by_dentry() will still try to use it, but throws a use-after-free warning (kref_get()) Make smb2_close_cached_fid() invalidate all fields every time, but only send an SMB2_close() when the entry is still valid. Signed-off-by: Enzo Matsumiya Reviewed-by: Paulo Alcantara (SUSE) Signed-off-by: Steve French Signed-off-by: Sasha Levin

sched/idle: Make the idle timer expire in hard interrupt context

2021-09-26T12:10:25+00:00

[ Upstream commit 9848417926353daa59d2b05eb26e185063dbac6e ] The intel powerclamp driver will setup a per-CPU worker with RT priority. The worker will then invoke play_idle() in which it remains in the idle poll loop until it is stopped by the timer it started earlier. That timer needs to expire in hard interrupt context on PREEMPT_RT. Otherwise the timer will expire in ksoftirqd as a SOFT timer but that task won't be scheduled on the CPU because its priority is lower than the priority of the worker which is in the idle loop. Always expire the idle timer in hard interrupt context. Reported-by: Thomas Gleixner Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20210906113034.jgfxrjdvxnjqgtmc@linutronix.de Signed-off-by: Sasha Levin

rtc: rx8010: select REGMAP_I2C

2021-09-26T12:10:25+00:00

[ Upstream commit 0c45d3e24ef3d3d87c5e0077b8f38d1372af7176 ] The rtc-rx8010 uses the I2C regmap but doesn't select it in Kconfig so depending on the configuration the build may fail. Fix it. Signed-off-by: Yu-Tung Chang Signed-off-by: Alexandre Belloni Link: https://lore.kernel.org/r/20210830052532.40356-1-mtwget@gmail.com Signed-off-by: Sasha Levin

blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues

2021-09-26T12:10:25+00:00

[ Upstream commit 7f2a6a69f7ced6db8220298e0497cf60482a9d4b ] Limiting number of request to BLK_MAX_REQUEST_COUNT at blk_plug hurts performance for large md arrays. [1] shows resync speed of md array drops for md array with more than 16 HDDs. Fix this by allowing more request at plug queue. The multiple_queue flag is used to only apply higher limit to multiple queue cases. [1] https://lore.kernel.org/linux-raid/CAFDAVznS71BXW8Jxv6k9dXc2iR3ysX3iZRBww_rzA8WifBFxGg@mail.gmail.com/ Tested-by: Marcin Wanat Signed-off-by: Song Liu Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()

2021-09-26T12:10:24+00:00

[ Upstream commit 884f0e84f1e3195b801319c8ec3d5774e9bf2710 ] The pending timer has been set up in blk_throtl_init(). However, the timer is not deleted in blk_throtl_exit(). This means that the timer handler may still be running after freeing the timer, which would result in a use-after-free. Fix by calling del_timer_sync() to delete the timer in blk_throtl_exit(). Signed-off-by: Li Jinlin Link: https://lore.kernel.org/r/20210907121242.2885564-1-lijinlin3@huawei.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

block: genhd: don't call blkdev_show() with major_names_lock held

2021-09-26T12:10:24+00:00

[ Upstream commit dfbb3409b27fa42b96f5727a80d3ceb6a8663991 ] If CONFIG_BLK_DEV_LOOP && CONFIG_MTD (at least; there might be other combinations), lockdep complains circular locking dependency at __loop_clr_fd(), for major_names_lock serves as a locking dependency aggregating hub across multiple block modules. ====================================================== WARNING: possible circular locking dependency detected 5.14.0+ #757 Tainted: G E ------------------------------------------------------ systemd-udevd/7568 is trying to acquire lock: ffff88800f334d48 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x70/0x560 but task is already holding lock: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&lo->lo_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_killable_nested+0x17/0x20 lo_open+0x23/0x50 [loop] blkdev_get_by_dev+0x199/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #5 (&disk->open_mutex){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 bd_register_pending_holders+0x20/0x100 device_add_disk+0x1ae/0x390 loop_add+0x29c/0x2d0 [loop] blk_request_module+0x5a/0xb0 blkdev_get_no_open+0x27/0xa0 blkdev_get_by_dev+0x5f/0x540 blkdev_open+0x58/0x90 do_dentry_open+0x144/0x3a0 path_openat+0xa57/0xda0 do_filp_open+0x9f/0x140 do_sys_openat2+0x71/0x150 __x64_sys_openat+0x78/0xa0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #4 (major_names_lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 blkdev_show+0x19/0x80 devinfo_show+0x52/0x60 seq_read_iter+0x2d5/0x3e0 proc_reg_read_iter+0x41/0x80 vfs_read+0x2ac/0x330 ksys_read+0x6b/0xd0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #3 (&p->lock){+.+.}-{3:3}: lock_acquire+0xbe/0x1f0 __mutex_lock_common+0xb6/0xe10 mutex_lock_nested+0x17/0x20 seq_read_iter+0x37/0x3e0 generic_file_splice_read+0xf3/0x170 splice_direct_to_actor+0x14e/0x350 do_splice_direct+0x84/0xd0 do_sendfile+0x263/0x430 __se_sys_sendfile64+0x96/0xc0 do_syscall_64+0x3d/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae -> #2 (sb_writers#3){.+.+}-{0:0}: lock_acquire+0xbe/0x1f0 lo_write_bvec+0x96/0x280 [loop] loop_process_work+0xa68/0xc10 [loop] process_one_work+0x293/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}: lock_acquire+0xbe/0x1f0 process_one_work+0x280/0x480 worker_thread+0x23d/0x4b0 kthread+0x163/0x180 ret_from_fork+0x1f/0x30 -> #0 ((wq_completion)loop0){+.+.}-{0:0}: validate_chain+0x1f0d/0x33e0 __lock_acquire+0x92d/0x1030 lock_acquire+0xbe/0x1f0 flush_workqueue+0x8c/0x560 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 __loop_clr_fd+0xb4/0x400 [loop] blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&lo->lo_mutex); lock(&disk->open_mutex); lock(&lo->lo_mutex); lock((wq_completion)loop0); *** DEADLOCK *** 2 locks held by systemd-udevd/7568: #0: ffff888012554128 (&disk->open_mutex){+.+.}-{3:3}, at: blkdev_put+0x4c/0x1d0 #1: ffff888014a7d4a0 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x4d/0x400 [loop] stack backtrace: CPU: 0 PID: 7568 Comm: systemd-udevd Tainted: G E 5.14.0+ #757 Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020 Call Trace: dump_stack_lvl+0x79/0xbf print_circular_bug+0x5d6/0x5e0 ? stack_trace_save+0x42/0x60 ? save_trace+0x3d/0x2d0 check_noncircular+0x10b/0x120 validate_chain+0x1f0d/0x33e0 ? __lock_acquire+0x953/0x1030 ? __lock_acquire+0x953/0x1030 __lock_acquire+0x92d/0x1030 ? flush_workqueue+0x70/0x560 lock_acquire+0xbe/0x1f0 ? flush_workqueue+0x70/0x560 flush_workqueue+0x8c/0x560 ? flush_workqueue+0x70/0x560 ? sched_clock_cpu+0xe/0x1a0 ? drain_workqueue+0x41/0x140 drain_workqueue+0x80/0x140 destroy_workqueue+0x47/0x4f0 ? blk_mq_freeze_queue_wait+0xac/0xd0 __loop_clr_fd+0xb4/0x400 [loop] ? __mutex_unlock_slowpath+0x35/0x230 blkdev_put+0x14a/0x1d0 blkdev_close+0x1c/0x20 __fput+0xfd/0x220 task_work_run+0x69/0xc0 exit_to_user_mode_prepare+0x1ce/0x1f0 syscall_exit_to_user_mode+0x26/0x60 do_syscall_64+0x4c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f0fd4c661f7 Code: 00 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 03 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 41 c3 48 83 ec 18 89 7c 24 0c e8 13 fc ff ff RSP: 002b:00007ffd1c9e9fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 00007f0fd46be6c8 RCX: 00007f0fd4c661f7 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000006 RBP: 0000000000000006 R08: 000055fff1eaf400 R09: 0000000000000000 R10: 00007f0fd46be6c8 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000002f08 R15: 00007ffd1c9ea050 Commit 1c500ad706383f1a ("loop: reduce the loop_ctl_mutex scope") is for breaking "loop_ctl_mutex => &lo->lo_mutex" dependency chain. But enabling a different block module results in forming circular locking dependency due to shared major_names_lock mutex. The simplest fix is to call probe function without holding major_names_lock [1], but Christoph Hellwig does not like such idea. Therefore, instead of holding major_names_lock in blkdev_show(), introduce a different lock for blkdev_show() in order to break "sb_writers#$N => &p->lock => major_names_lock" dependency chain. Link: https://lkml.kernel.org/r/b2af8a5b-3c1b-204e-7f56-bea0b15848d6@i-love.sakura.ne.jp [1] Signed-off-by: Tetsuo Handa Link: https://lore.kernel.org/r/18a02da2-0bf3-550e-b071-2b4ab13c49f0@i-love.sakura.ne.jp Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin