kernel/linux.git, branch v5.10.197

Linux 5.10.197

2023-09-23T09:01:11+00:00

Link: https://lore.kernel.org/r/20230920112826.634178162@linuxfoundation.org Tested-by: Shuah Khan Tested-by: Dominique Martinet Tested-by: Linux Kernel Functional Testing Tested-by: Joel Fernandes (Google) Tested-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman

ext4: fix rec_len verify error

2023-09-23T09:01:11+00:00

commit 7fda67e8c3ab6069f75888f67958a6d30454a9f6 upstream. With the configuration PAGE_SIZE 64k and filesystem blocksize 64k, a problem occurred when more than 13 million files were directly created under a directory: EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D. EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D. EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum When enough files are created, the fake_dirent->reclen will be 0xffff. it doesn't equal to the blocksize 65536, i.e. 0x10000. But it is not the same condition when blocksize equals to 4k. when enough files are created, the fake_dirent->reclen will be 0x1000. it equals to the blocksize 4k, i.e. 0x1000. The problem seems to be related to the limitation of the 16-bit field when the blocksize is set to 64k. To address this, helpers like ext4_rec_len_{from,to}_disk has already been introduced to complete the conversion between the encoded and the plain form of rec_len. So fix this one by using the helper, and all the other in this file too. Cc: stable@kernel.org Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Suggested-by: Andreas Dilger Suggested-by: Darrick J. Wong Signed-off-by: Shida Zhang Reviewed-by: Andreas Dilger Reviewed-by: Darrick J. Wong Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

scsi: pm8001: Setup IRQs on resume

2023-09-23T09:01:11+00:00

commit c91774818b041ed290df29fb1dc0725be9b12e83 upstream. The function pm8001_pci_resume() only calls pm8001_request_irq() without calling pm8001_setup_irq(). This causes the IRQ allocation to fail, which leads all drives being removed from the system. Fix this issue by integrating the code for pm8001_setup_irq() directly inside pm8001_request_irq() so that MSI-X setup is performed both during normal initialization and resume operations. Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Link: https://lore.kernel.org/r/20230911232745.325149-2-dlemoal@kernel.org Acked-by: Jack Wang Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: megaraid_sas: Fix deadlock on firmware crashdump

2023-09-23T09:01:11+00:00

commit 0b0747d507bffb827e40fc0f9fb5883fffc23477 upstream. The following processes run into a deadlock. CPU 41 was waiting for CPU 29 to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29 was hung by that spinlock with IRQs disabled. PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd" !# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0 !# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0 !# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0 # 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0 # 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0 # 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0 # 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0 # 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0 # 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0 # 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0 #10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0 #11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0 #12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0 #13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0 #14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0 #15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0 #16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0 #17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0 #18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0 #19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd" !# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0 !# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0 # 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0 # 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0 # 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0 # 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0 # 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0 # 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0 # 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0 # 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0 #10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0 #11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0 #12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0 #13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0 #14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0 #15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0 #16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0 #17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0 The lock is used to synchronize different sysfs operations, it doesn't protect any resource that will be touched by an interrupt. Consequently it's not required to disable IRQs. Replace the spinlock with a mutex to fix the deadlock. Signed-off-by: Junxiao Bi Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie Cc: stable@vger.kernel.org Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

ata: libata: disallow dev-initiated LPM transitions to unsupported states

2023-09-23T09:01:11+00:00

commit 24e0e61db3cb86a66824531989f1df80e0939f26 upstream. In AHCI 1.3.1, the register description for CAP.SSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Slumber state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Slumber requests." In AHCI 1.3.1, the register description for CAP.PSC: "When cleared to ‘0’, software must not allow the HBA to initiate transitions to the Partial state via agressive link power management nor the PxCMD.ICC field in each port, and the PxSCTL.IPM field in each port must be programmed to disallow device initiated Partial requests." Ensure that we always set the corresponding bits in PxSCTL.IPM, such that a device is not allowed to initiate transitions to power states which are unsupported by the HBA. DevSleep is always initiated by the HBA, however, for completeness, set the corresponding bit in PxSCTL.IPM such that agressive link power management cannot transition to DevSleep if DevSleep is not supported. sata_link_scr_lpm() is used by libahci, ata_piix and libata-pmp. However, only libahci has the ability to read the CAP/CAP2 register to see if these features are supported. Therefore, in order to not introduce any regressions on ata_piix or libata-pmp, create flags that indicate that the respective feature is NOT supported. This way, the behavior for ata_piix and libata-pmp should remain unchanged. This change is based on a patch originally submitted by Runa Guo-oc. Signed-off-by: Niklas Cassel Fixes: 1152b2617a6e ("libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Greg Kroah-Hartman

i2c: aspeed: Reset the i2c controller when timeout occurs

2023-09-23T09:01:11+00:00

commit fee465150b458351b6d9b9f66084f3cc3022b88b upstream. Reset the i2c controller when an i2c transfer timeout occurs. The remaining interrupts and device should be reset to avoid unpredictable controller behavior. Fixes: 2e57b7cebb98 ("i2c: aspeed: Add multi-master use case support") Cc: # v5.1+ Signed-off-by: Tommy Huang Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

tracefs: Add missing lockdown check to tracefs_create_dir()

2023-09-23T09:01:10+00:00

commit 51aab5ffceb43e05119eb059048fd75765d2bc21 upstream. The function tracefs_create_dir() was missing a lockdown check and was called by the RV code. This gave an inconsistent behavior of this function returning success while other tracefs functions failed. This caused the inode being freed by the wrong kmem_cache. Link: https://lkml.kernel.org/r/20230905182711.692687042@goodmis.org Link: https://lore.kernel.org/all/202309050916.58201dc6-oliver.sang@intel.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Andrew Morton Cc: Ajay Kaher Cc: Ching-lin Yu Fixes: bf8e602186ec4 ("tracing: Do not create tracefs files if tracefs lockdown is in effect") Reported-by: kernel test robot Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

nfsd: fix change_info in NFSv4 RENAME replies

2023-09-23T09:01:10+00:00

commit fdd2630a7398191e84822612e589062063bd4f3d upstream. nfsd sends the transposed directory change info in the RENAME reply. The source directory is in save_fh and the target is in current_fh. Reported-by: Zhi Li Reported-by: Benjamin Coddington Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2218844 Signed-off-by: Jeff Layton Cc: Signed-off-by: Chuck Lever Signed-off-by: Greg Kroah-Hartman

tracing: Have option files inc the trace array ref count

2023-09-23T09:01:10+00:00

commit 7e2cfbd2d3c86afcd5c26b5c4b1dd251f63c5838 upstream. The option files update the options for a given trace array. For an instance, if the file is opened and the instance is deleted, reading or writing to the file will cause a use after free. Up the ref count of the trace_array when an option file is opened. Link: https://lkml.kernel.org/r/20230907024804.086679464@goodmis.org Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Andrew Morton Cc: Zheng Yejian Fixes: 8530dec63e7b4 ("tracing: Add tracing_check_open_get_tr()") Tested-by: Linux Kernel Functional Testing Tested-by: Naresh Kamboju Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

tracing: Have current_trace inc the trace array ref count

2023-09-23T09:01:10+00:00

commit 9b37febc578b2e1ad76a105aab11d00af5ec3d27 upstream. The current_trace updates the trace array tracer. For an instance, if the file is opened and the instance is deleted, reading or writing to the file will cause a use after free. Up the ref count of the trace array when current_trace is opened. Link: https://lkml.kernel.org/r/20230907024803.877687227@goodmis.org Link: https://lore.kernel.org/all/1cb3aee2-19af-c472-e265-05176fe9bd84@huawei.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Andrew Morton Cc: Zheng Yejian Fixes: 8530dec63e7b4 ("tracing: Add tracing_check_open_get_tr()") Tested-by: Linux Kernel Functional Testing Tested-by: Naresh Kamboju Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman