kernel/linux.git, branch v5.10.135

Linux 5.10.135

2022-08-03T10:00:52+00:00

Link: https://lore.kernel.org/r/20220801114133.641770326@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Tested-by: Shuah Khan Tested-by: Guenter Roeck Tested-by: Rudi Heitbaum Tested-by: Pavel Machek (CIP) Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

selftests: bpf: Don't run sk_lookup in verifier tests

2022-08-03T10:00:52+00:00

commit b4f894633fa14d7d46ba7676f950b90a401504bb upstream. sk_lookup doesn't allow setting data_in for bpf_prog_run. This doesn't play well with the verifier tests, since they always set a 64 byte input buffer. Allow not running verifier tests by setting bpf_test.runs to a negative value and don't run the ctx access case for sk_lookup. We have dedicated ctx access tests so skipping here doesn't reduce coverage. Signed-off-by: Lorenz Bauer Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210303101816.36774-6-lmb@cloudflare.com Signed-off-by: Tianchen Ding Signed-off-by: Greg Kroah-Hartman

bpf: Add PROG_TEST_RUN support for sk_lookup programs

2022-08-03T10:00:52+00:00

commit 7c32e8f8bc33a5f4b113a630857e46634e3e143b upstream. Allow to pass sk_lookup programs to PROG_TEST_RUN. User space provides the full bpf_sk_lookup struct as context. Since the context includes a socket pointer that can't be exposed to user space we define that PROG_TEST_RUN returns the cookie of the selected socket or zero in place of the socket pointer. We don't support testing programs that select a reuseport socket, since this would mean running another (unrelated) BPF program from the sk_lookup test handler. Signed-off-by: Lorenz Bauer Signed-off-by: Alexei Starovoitov Link: https://lore.kernel.org/bpf/20210303101816.36774-3-lmb@cloudflare.com Signed-off-by: Tianchen Ding Signed-off-by: Greg Kroah-Hartman

bpf: Consolidate shared test timing code

2022-08-03T10:00:52+00:00

commit 607b9cc92bd7208338d714a22b8082fe83bcb177 upstream. Share the timing / signal interruption logic between different implementations of PROG_TEST_RUN. There is a change in behaviour as well. We check the loop exit condition before checking for pending signals. This resolves an edge case where a signal arrives during the last iteration. Instead of aborting with EINTR we return the successful result to user space. Signed-off-by: Lorenz Bauer Signed-off-by: Alexei Starovoitov Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20210303101816.36774-2-lmb@cloudflare.com [dtcccc: fix conflicts in bpf_test_run()] Signed-off-by: Tianchen Ding Signed-off-by: Greg Kroah-Hartman

x86/bugs: Do not enable IBPB at firmware entry when IBPB is not available

2022-08-03T10:00:51+00:00

commit 571c30b1a88465a1c85a6f7762609939b9085a15 upstream. Some cloud hypervisors do not provide IBPB on very recent CPU processors, including AMD processors affected by Retbleed. Using IBPB before firmware calls on such systems would cause a GPF at boot like the one below. Do not enable such calls when IBPB support is not present. EFI Variables Facility v0.08 2004-May-17 general protection fault, maybe for address 0x1: 0000 [#1] PREEMPT SMP NOPTI CPU: 0 PID: 24 Comm: kworker/u2:1 Not tainted 5.19.0-rc8+ #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015 Workqueue: efi_rts_wq efi_call_rts RIP: 0010:efi_call_rts Code: e8 37 33 58 ff 41 bf 48 00 00 00 49 89 c0 44 89 f9 48 83 c8 01 4c 89 c2 48 c1 ea 20 66 90 b9 49 00 00 00 b8 01 00 00 00 31 d2 <0f> 30 e8 7b 9f 5d ff e8 f6 f8 ff ff 4c 89 f1 4c 89 ea 4c 89 e6 48 RSP: 0018:ffffb373800d7e38 EFLAGS: 00010246 RAX: 0000000000000001 RBX: 0000000000000006 RCX: 0000000000000049 RDX: 0000000000000000 RSI: ffff94fbc19d8fe0 RDI: ffff94fbc1b2b300 RBP: ffffb373800d7e70 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000000b R11: 000000000000000b R12: ffffb3738001fd78 R13: ffff94fbc2fcfc00 R14: ffffb3738001fd80 R15: 0000000000000048 FS: 0000000000000000(0000) GS:ffff94fc3da00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff94fc30201000 CR3: 000000006f610000 CR4: 00000000000406f0 Call Trace: ? __wake_up process_one_work worker_thread ? rescuer_thread kthread ? kthread_complete_and_exit ret_from_fork Modules linked in: Fixes: 28a99e95f55c ("x86/amd: Use IBPB for firmware calls") Reported-by: Dimitri John Ledkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Borislav Petkov Cc: Link: https://lore.kernel.org/r/20220728122602.2500509-1-cascardo@canonical.com Signed-off-by: Greg Kroah-Hartman

xfs: Enforce attr3 buffer recovery order

2022-08-03T10:00:51+00:00

commit d8f4c2d0398fa1d92cacf854daf80d21a46bfefc upstream. >From the department of "WTAF? How did we miss that!?"... When we are recovering a buffer, the first thing we do is check the buffer magic number and extract the LSN from the buffer. If the LSN is older than the current LSN, we replay the modification to it. If the metadata on disk is newer than the transaction in the log, we skip it. This is a fundamental v5 filesystem metadata recovery behaviour. generic/482 failed with an attribute writeback failure during log recovery. The write verifier caught the corruption before it got written to disk, and the attr buffer dump looked like: XFS (dm-3): Metadata corruption detected at xfs_attr3_leaf_verify+0x275/0x2e0, xfs_attr3_leaf block 0x19be8 XFS (dm-3): Unmount and run xfs_repair XFS (dm-3): First 128 bytes of corrupted metadata buffer: 00000000: 00 00 00 00 00 00 00 00 3b ee 00 00 4d 2a 01 e1 ........;...M*.. 00000010: 00 00 00 00 00 01 9b e8 00 00 00 01 00 00 05 38 ...............8 ^^^^^^^^^^^^^^^^^^^^^^^ 00000020: df 39 5e 51 58 ac 44 b6 8d c5 e7 10 44 09 bc 17 .9^QX.D.....D... 00000030: 00 00 00 00 00 02 00 83 00 03 00 cc 0f 24 01 00 .............$.. 00000040: 00 68 0e bc 0f c8 00 10 00 00 00 00 00 00 00 00 .h.............. 00000050: 00 00 3c 31 0f 24 01 00 00 00 3c 32 0f 88 01 00 ..<1.$....<2.... 00000060: 00 00 3c 33 0f d8 01 00 00 00 00 00 00 00 00 00 ..<3............ 00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ ..... The highlighted bytes are the LSN that was replayed into the buffer: 0x100000538. This is cycle 1, block 0x538. Prior to replay, that block on disk looks like this: $ sudo xfs_db -c "fsb 0x417d" -c "type attr3" -c p /dev/mapper/thin-vol hdr.info.hdr.forw = 0 hdr.info.hdr.back = 0 hdr.info.hdr.magic = 0x3bee hdr.info.crc = 0xb5af0bc6 (correct) hdr.info.bno = 105448 hdr.info.lsn = 0x100000900 ^^^^^^^^^^^ hdr.info.uuid = df395e51-58ac-44b6-8dc5-e7104409bc17 hdr.info.owner = 131203 hdr.count = 2 hdr.usedbytes = 120 hdr.firstused = 3796 hdr.holes = 1 hdr.freemap[0-2] = [base,size] Note the LSN stamped into the buffer on disk: 1/0x900. The version on disk is much newer than the log transaction that was being replayed. That's a bug, and should -never- happen. So I immediately went to look at xlog_recover_get_buf_lsn() to check that we handled the LSN correctly. I was wondering if there was a similar "two commits with the same start LSN skips the second replay" problem with buffers. I didn't get that far, because I found a much more basic, rudimentary bug: xlog_recover_get_buf_lsn() doesn't recognise buffers with XFS_ATTR3_LEAF_MAGIC set in them!!! IOWs, attr3 leaf buffers fall through the magic number checks unrecognised, so trigger the "recover immediately" behaviour instead of undergoing an LSN check. IOWs, we incorrectly replay ATTR3 leaf buffers and that causes silent on disk corruption of inode attribute forks and potentially other things.... Git history shows this is *another* zero day bug, this time introduced in commit 50d5c8d8e938 ("xfs: check LSN ordering for v5 superblocks during recovery") which failed to handle the attr3 leaf buffers in recovery. And we've failed to handle them ever since... Signed-off-by: Dave Chinner Reviewed-by: Christoph Hellwig Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Amir Goldstein Acked-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman

xfs: logging the on disk inode LSN can make it go backwards

2022-08-03T10:00:51+00:00

commit 32baa63d82ee3f5ab3bd51bae6bf7d1c15aed8c7 upstream. When we log an inode, we format the "log inode" core and set an LSN in that inode core. We do that via xfs_inode_item_format_core(), which calls: xfs_inode_to_log_dinode(ip, dic, ip->i_itemp->ili_item.li_lsn); to format the log inode. It writes the LSN from the inode item into the log inode, and if recovery decides the inode item needs to be replayed, it recovers the log inode LSN field and writes it into the on disk inode LSN field. Now this might seem like a reasonable thing to do, but it is wrong on multiple levels. Firstly, if the item is not yet in the AIL, item->li_lsn is zero. i.e. the first time the inode it is logged and formatted, the LSN we write into the log inode will be zero. If we only log it once, recovery will run and can write this zero LSN into the inode. This means that the next time the inode is logged and log recovery runs, it will *always* replay changes to the inode regardless of whether the inode is newer on disk than the version in the log and that violates the entire purpose of recording the LSN in the inode at writeback time (i.e. to stop it going backwards in time on disk during recovery). Secondly, if we commit the CIL to the journal so the inode item moves to the AIL, and then relog the inode, the LSN that gets stamped into the log inode will be the LSN of the inode's current location in the AIL, not it's age on disk. And it's not the LSN that will be associated with the current change. That means when log recovery replays this inode item, the LSN that ends up on disk is the LSN for the previous changes in the log, not the current changes being replayed. IOWs, after recovery the LSN on disk is not in sync with the LSN of the modifications that were replayed into the inode. This, again, violates the recovery ordering semantics that on-disk writeback LSNs provide. Hence the inode LSN in the log dinode is -always- invalid. Thirdly, recovery actually has the LSN of the log transaction it is replaying right at hand - it uses it to determine if it should replay the inode by comparing it to the on-disk inode's LSN. But it doesn't use that LSN to stamp the LSN into the inode which will be written back when the transaction is fully replayed. It uses the one in the log dinode, which we know is always going to be incorrect. Looking back at the change history, the inode logging was broken by commit 93f958f9c41f ("xfs: cull unnecessary icdinode fields") way back in 2016 by a stupid idiot who thought he knew how this code worked. i.e. me. That commit replaced an in memory di_lsn field that was updated only at inode writeback time from the inode item.li_lsn value - and hence always contained the same LSN that appeared in the on-disk inode - with a read of the inode item LSN at inode format time. CLearly these are not the same thing. Before 93f958f9c41f, the log recovery behaviour was irrelevant, because the LSN in the log inode always matched the on-disk LSN at the time the inode was logged, hence recovery of the transaction would never make the on-disk LSN in the inode go backwards or get out of sync. A symptom of the problem is this, caught from a failure of generic/482. Before log recovery, the inode has been allocated but never used: xfs_db> inode 393388 xfs_db> p core.magic = 0x494e core.mode = 0 .... v3.crc = 0x99126961 (correct) v3.change_count = 0 v3.lsn = 0 v3.flags2 = 0 v3.cowextsize = 0 v3.crtime.sec = Thu Jan 1 10:00:00 1970 v3.crtime.nsec = 0 After log recovery: xfs_db> p core.magic = 0x494e core.mode = 020444 .... v3.crc = 0x23e68f23 (correct) v3.change_count = 2 v3.lsn = 0 v3.flags2 = 0 v3.cowextsize = 0 v3.crtime.sec = Thu Jul 22 17:03:03 2021 v3.crtime.nsec = 751000000 ... You can see that the LSN of the on-disk inode is 0, even though it clearly has been written to disk. I point out this inode, because the generic/482 failure occurred because several adjacent inodes in this specific inode cluster were not replayed correctly and still appeared to be zero on disk when all the other metadata (inobt, finobt, directories, etc) indicated they should be allocated and written back. The fix for this is two-fold. The first is that we need to either revert the LSN changes in 93f958f9c41f or stop logging the inode LSN altogether. If we do the former, log recovery does not need to change but we add 8 bytes of memory per inode to store what is largely a write-only inode field. If we do the latter, log recovery needs to stamp the on-disk inode in the same manner that inode writeback does. I prefer the latter, because we shouldn't really be trying to log and replay changes to the on disk LSN as the on-disk value is the canonical source of the on-disk version of the inode. It also matches the way we recover buffer items - we create a buf_log_item that carries the current recovery transaction LSN that gets stamped into the buffer by the write verifier when it gets written back when the transaction is fully recovered. However, this might break log recovery on older kernels even more, so I'm going to simply ignore the logged value in recovery and stamp the on-disk inode with the LSN of the transaction being recovered that will trigger writeback on transaction recovery completion. This will ensure that the on-disk inode LSN always reflects the LSN of the last change that was written to disk, regardless of whether it comes from log recovery or runtime writeback. Fixes: 93f958f9c41f ("xfs: cull unnecessary icdinode fields") Signed-off-by: Dave Chinner Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Amir Goldstein Acked-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman

xfs: remove dead stale buf unpin handling code

2022-08-03T10:00:51+00:00

commit e53d3aa0b605c49d780e1b2fd0b49dba4154f32b upstream. This code goes back to a time when transaction commits wrote directly to iclogs. The associated log items were pinned, written to the log, and then "uncommitted" if some part of the log write had failed. This uncommit sequence called an ->iop_unpin_remove() handler that was eventually folded into ->iop_unpin() via the remove parameter. The log subsystem has since changed significantly in that transactions commit to the CIL instead of direct to iclogs, though log items must still be aborted in the event of an eventual log I/O error. However, the context for a log item abort is now asynchronous from transaction commit, which means the committing transaction has been freed by this point in time and the transaction uncommit sequence of events is no longer relevant. Further, since stale buffers remain locked at transaction commit through unpin, we can be certain that the buffer is not associated with any transaction when the unpin callback executes. Remove this unused hunk of code and replace it with an assertion that the buffer is disassociated from transaction context. Signed-off-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Amir Goldstein Acked-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman

xfs: hold buffer across unpin and potential shutdown processing

2022-08-03T10:00:51+00:00

commit 84d8949e770745b16a7e8a68dcb1d0f3687bdee9 upstream. The special processing used to simulate a buffer I/O failure on fs shutdown has a difficult to reproduce race that can result in a use after free of the associated buffer. Consider a buffer that has been committed to the on-disk log and thus is AIL resident. The buffer lands on the writeback delwri queue, but is subsequently locked, committed and pinned by another transaction before submitted for I/O. At this point, the buffer is stuck on the delwri queue as it cannot be submitted for I/O until it is unpinned. A log checkpoint I/O failure occurs sometime later, which aborts the bli. The unpin handler is called with the aborted log item, drops the bli reference count, the pin count, and falls into the I/O failure simulation path. The potential problem here is that once the pin count falls to zero in ->iop_unpin(), xfsaild is free to retry delwri submission of the buffer at any time, before the unpin handler even completes. If delwri queue submission wins the race to the buffer lock, it observes the shutdown state and simulates the I/O failure itself. This releases both the bli and delwri queue holds and frees the buffer while xfs_buf_item_unpin() sits on xfs_buf_lock() waiting to run through the same failure sequence. This problem is rare and requires many iterations of fstest generic/019 (which simulates disk I/O failures) to reproduce. To avoid this problem, grab a hold on the buffer before the log item is unpinned if the associated item has been aborted and will require a simulated I/O failure. The hold is already required for the simulated I/O failure, so the ordering simply guarantees the unpin handler access to the buffer before it is unpinned and thus processed by the AIL. This particular ordering is required so long as the AIL does not acquire a reference on the bli, which is the long term solution to this problem. Signed-off-by: Brian Foster Reviewed-by: Darrick J. Wong Signed-off-by: Darrick J. Wong Signed-off-by: Amir Goldstein Acked-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman

xfs: force the log offline when log intent item recovery fails

2022-08-03T10:00:51+00:00

commit 4e6b8270c820c8c57a73f869799a0af2b56eff3e upstream. If any part of log intent item recovery fails, we should shut down the log immediately to stop the log from writing a clean unmount record to disk, because the metadata is not consistent. The inability to cancel a dirty transaction catches most of these cases, but there are a few things that have slipped through the cracks, such as ENOSPC from a transaction allocation, or runtime errors that result in cancellation of a non-dirty transaction. This solves some weird behaviors reported by customers where a system goes down, the first mount fails, the second succeeds, but then the fs goes down later because of inconsistent metadata. Signed-off-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Amir Goldstein Acked-by: Darrick J. Wong Signed-off-by: Greg Kroah-Hartman