kernel/linux.git, branch v5.10.114

Linux 5.10.114

2022-05-09T07:05:09+00:00

Link: https://lore.kernel.org/r/20220504153021.299025455@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Hulk Robot Tested-by: Florian Fainelli Tested-by: Jon Hunter Tested-by: Salvatore Bonaccorso Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

perf symbol: Remove archsymbolsfixup_end()

2022-05-09T07:05:09+00:00

commit a5d20d42a2f2dc2b2f9e9361912062732414090d upstream. Now the generic code can handle kallsyms fixup properly so no need to keep the arch-functions anymore. Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition") Signed-off-by: Namhyung Kim Acked-by: Ian Rogers Cc: Heiko Carstens Cc: Ingo Molnar Cc: Jiri Olsa Cc: John Garry Cc: Leo Yan Cc: Mark Rutland Cc: Masami Hiramatsu Cc: Mathieu Poirier Cc: Michael Ellerman Cc: Michael Petlan Cc: Peter Zijlstra Cc: Song Liu Cc: Will Deacon Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20220416004048.1514900-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix software flow control handling

2022-05-09T07:05:08+00:00

commit f4f7d63287217ba25e5c80f5faae5e4f7118790e upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters shall be used instead of Fcon/Fcoff command in advanced option mode to handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters shall be handled. Basic option mode only used Fcon/Fcoff commands and no XON/XOFF characters. These are treated as data bytes here. The current implementation uses the gsm_mux field 'constipated' to handle flow control from the remote peer and the gsm_dlci field 'constipated' to handle flow control from each DLCI. The later is unrelated to this patch. The gsm_mux field is correctly set for Fcon/Fcoff commands in gsm_control_message(). However, the same is not true for XON/XOFF characters in gsm1_receive(). Disable software flow control handling in the tty to allow explicit handling by n_gsm. Add the missing handling in advanced option mode for gsm_mux in gsm1_receive() to comply with the standard. This patch depends on the following commit: Commit 8838b2af23ca ("tty: n_gsm: fix SW flow control encoding/handling") Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220422071025.5490-3-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix incorrect UA handling

2022-05-09T07:05:08+00:00

commit ff9166c623704337bd6fe66fce2838d9768a6634 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be discarded. Currently, all UA frame are handled in the same way regardless of the PF bit. This does not comply with the standard. Remove the UA case in gsm_queue() to process only UA frames with PF bit set to 1 to abide the standard. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix reset fifo race condition

2022-05-09T07:05:08+00:00

commit 73029a4d7161f8b6c0934553145ef574d2d0c645 upstream. gsmtty_write() and gsm_dlci_data_output() properly guard the fifo access. However, gsm_dlci_close() and gsmtty_flush_buffer() modifies the fifo but do not guard this. Add a guard here to prevent race conditions on parallel writes to the fifo. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-17-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix wrong command frame length field encoding

2022-05-09T07:05:08+00:00

commit 398867f59f956985f4c324f173eff7b946e14bd8 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall be made up from type, length and value. Looking for example in chapter 5.4.6.3.5 at the description for the encoding of a flow control on command it becomes obvious, that the type and length field is always present whereas the value may be zero bytes long. The current implementation omits the length field if the value is not present. This is wrong. Correct this by always sending the length in gsm_control_transmit(). So far only the modem status command (MSC) has included a value and encoded its length directly. Therefore, also change gsmtty_modem_update(). Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix wrong command retry handling

2022-05-09T07:05:08+00:00

commit d0bcdffcad5a22f202e3bf37190c0dd8c080ea92 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.3 states that the valid range for the maximum number of retransmissions (N2) is from 0 to 255 (both including). gsm_config() fails to limit this range correctly. Furthermore, gsm_control_retransmit() handles this number incorrectly by performing N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255 retransmission attempts. Fix the range check in gsm_config() and the value handling in gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix missing explicit ldisc flush

2022-05-09T07:05:08+00:00

commit 17eac652028501df7ea296b1d9b9c134db262b7d upstream. In gsm_cleanup_mux() the muxer is closed down and all queues are removed. However, removing the queues is done without explicit control of the underlying buffers. Flush those before freeing up our queues to ensure that all outgoing queues are cleared consistently. Otherwise, a new mux connection establishment attempt may time out while the underlying tty is still busy sending out the remaining data from the previous connection. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix wrong DLCI release order

2022-05-09T07:05:08+00:00

commit deefc58bafb4841df7f0a0d85d89a1c819db9743 upstream. The current DLCI release order starts with the control channel followed by the user channels. Reverse this order to keep the control channel open until all user channels have been released. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-9-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

tty: n_gsm: fix insufficient txframe size

2022-05-09T07:05:08+00:00

commit 535bf600de75a859698892ee873521a48d289ec1 upstream. n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010. See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516 The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size (N1) refers to the length of the information field (i.e. user payload). However, 'txframe' stores the whole frame including frame header, checksum and start/end flags. We also need to consider the byte stuffing overhead. Define constant for the protocol overhead and adjust the 'txframe' size calculation accordingly to reserve enough space for a complete mux frame including byte stuffing for advanced option mode. Note that no byte stuffing is applied to the start and end flag. Also use MAX_MTU instead of MAX_MRU as this buffer is used for data transmission. Fixes: e1eaea46bb40 ("tty: n_gsm line discipline") Cc: stable@vger.kernel.org Signed-off-by: Daniel Starke Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com Signed-off-by: Greg Kroah-Hartman

kernel/linux.git, branch v5.10.114

Linux 5.10.114

perf symbol: Remove arch__symbols__fixup_end()

tty: n_gsm: fix software flow control handling

tty: n_gsm: fix incorrect UA handling

tty: n_gsm: fix reset fifo race condition

tty: n_gsm: fix wrong command frame length field encoding

tty: n_gsm: fix wrong command retry handling

tty: n_gsm: fix missing explicit ldisc flush

tty: n_gsm: fix wrong DLCI release order

tty: n_gsm: fix insufficient txframe size

perf symbol: Remove archsymbolsfixup_end()