kernel/linux.git, branch v5.10.109

Linux 5.10.109

2022-03-28T07:57:11+00:00

Link: https://lore.kernel.org/r/20220325150419.757836392@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Fox Chen Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Bagas Sanjaya Tested-by: Salvatore Bonaccorso Tested-by: Linux Kernel Functional Testing Tested-by: Sudip Mukherjee Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

llc: only change llc->dev when bind() succeeds

2022-03-28T07:57:10+00:00

commit 2d327a79ee176930dc72c131a970c891d367c1dc upstream. My latest patch, attempting to fix the refcount leak in a minimal way turned out to add a new bug. Whenever the bind operation fails before we attempt to grab a reference count on a device, we might release the device refcount of a prior successful bind() operation. syzbot was not happy about this [1]. Note to stable teams: Make sure commit b37a46683739 ("netdevice: add the case if dev is NULL") is already present in your trees. [1] general protection fault, probably for non-canonical address 0xdffffc0000000070: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 1 PID: 3590 Comm: syz-executor361 Tainted: G W 5.17.0-syzkaller-04796-g169e77764adc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500 Code: 80 3c 02 00 0f 85 fc 07 00 00 4c 8b a5 38 05 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a9 07 00 00 49 8b b4 24 80 03 00 00 4c 89 f2 48 RSP: 0018:ffffc900038cfcc0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8880756eb600 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffc900038cfe3e RDI: 0000000000000380 RBP: ffff888015ee5000 R08: 0000000000000001 R09: ffff888015ee5535 R10: ffffed1002bdcaa6 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900038cfe37 R14: ffffc900038cfe38 R15: ffff888015ee5012 FS: 0000555555acd300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000280 CR3: 0000000077db6000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sys_connect_file+0x155/0x1a0 net/socket.c:1900 __sys_connect+0x161/0x190 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x6f/0xb0 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f016acb90b9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd417947f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f016acb90b9 RDX: 0000000000000010 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00007f016ac7d0a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f016ac7d130 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500 Fixes: 764f4eb6846f ("llc: fix netdevice reference leaks in llc_ui_bind()") Signed-off-by: Eric Dumazet Reported-by: syzbot Cc: 赵子轩 Cc: Stoyan Manolov Link: https://lore.kernel.org/r/20220325035827.360418-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

nds32: fix access_ok() checks in get/put_user

2022-03-28T07:57:10+00:00

commit 8926d88ced46700bf6117ceaf391480b943ea9f4 upstream. The get_user()/put_user() functions are meant to check for access_ok(), while the __get_user()/__put_user() functions don't. This broke in 4.19 for nds32, when it gained an extraneous check in __get_user(), but lost the check it needs in __put_user(). Fixes: 487913ab18c2 ("nds32: Extract the checking and getting pointer to a macro") Cc: stable@vger.kernel.org @ v4.19+ Reviewed-by: Christoph Hellwig Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

wcn36xx: Differentiate wcn3660 from wcn3620

2022-03-28T07:57:10+00:00

commit 98d504a82cc75840bec8e3c6ae0e4f411921962b upstream. The spread of capability between the three WiFi silicon parts wcn36xx supports is: wcn3620 - 802.11 a/b/g wcn3660 - 802.11 a/b/g/n wcn3680 - 802.11 a/b/g/n/ac We currently treat wcn3660 as wcn3620 thus limiting it to 2GHz channels. Fix this regression by ensuring we differentiate between all three parts. Fixes: 8490987bdb9a ("wcn36xx: Hook and identify RF_IRIS_WCN3680") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue Reviewed-by: Loic Poulain Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20220125004046.4058284-1-bryan.odonoghue@linaro.org Signed-off-by: Greg Kroah-Hartman

tpm: use try_get_ops() in tpm-space.c

2022-03-28T07:57:10+00:00

commit fb5abce6b2bb5cb3d628aaa63fa821da8c4600f9 upstream. As part of the series conversion to remove nested TPM operations: https://lore.kernel.org/all/20190205224723.19671-1-jarkko.sakkinen@linux.intel.com/ exposure of the chip->tpm_mutex was removed from much of the upper level code. In this conversion, tpm2_del_space() was missed. This didn't matter much because it's usually called closely after a converted operation, so there's only a very tiny race window where the chip can be removed before the space flushing is done which causes a NULL deref on the mutex. However, there are reports of this window being hit in practice, so fix this by converting tpm2_del_space() to use tpm_try_get_ops(), which performs all the teardown checks before acquring the mutex. Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: James Bottomley Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman

mac80211: fix potential double free on mesh join

2022-03-28T07:57:10+00:00

commit 4a2d4496e15ea5bb5c8e83b94ca8ca7fb045e7d3 upstream. While commit 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") fixed a memory leak on mesh leave / teardown it introduced a potential memory corruption caused by a double free when rejoining the mesh: ieee80211_leave_mesh() -> kfree(sdata->u.mesh.ie); ... ieee80211_join_mesh() -> copy_mesh_setup() -> old_ie = ifmsh->ie; -> kfree(old_ie); This double free / kernel panics can be reproduced by using wpa_supplicant with an encrypted mesh (if set up without encryption via "iw" then ifmsh->ie is always NULL, which avoids this issue). And then calling: $ iw dev mesh0 mesh leave $ iw dev mesh0 mesh join my-mesh Note that typically these commands are not used / working when using wpa_supplicant. And it seems that wpa_supplicant or wpa_cli are going through a NETDEV_DOWN/NETDEV_UP cycle between a mesh leave and mesh join where the NETDEV_UP resets the mesh.ie to NULL via a memcpy of default_mesh_setup in cfg80211_netdev_notifier_call, which then avoids the memory corruption, too. The issue was first observed in an application which was not using wpa_supplicant but "Senf" instead, which implements its own calls to nl80211. Fixing the issue by removing the kfree()'ing of the mesh IE in the mesh join function and leaving it solely up to the mesh leave to free the mesh IE. Cc: stable@vger.kernel.org Fixes: 6a01afcf8468 ("mac80211: mesh: Free ie data when leaving mesh") Reported-by: Matthias Kretschmer Signed-off-by: Linus Lüssing Tested-by: Mathias Kretschmer Link: https://lore.kernel.org/r/20220310183513.28589-1-linus.luessing@c0d3.blue Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

rcu: Don't deboost before reporting expedited quiescent state

2022-03-28T07:57:10+00:00

commit 10c535787436d62ea28156a4b91365fd89b5a432 upstream. Currently rcu_preempt_deferred_qs_irqrestore() releases rnp->boost_mtx before reporting the expedited quiescent state. Under heavy real-time load, this can result in this function being preempted before the quiescent state is reported, which can in turn prevent the expedited grace period from completing. Tim Murray reports that the resulting expedited grace periods can take hundreds of milliseconds and even more than one second, when they should normally complete in less than a millisecond. This was fine given that there were no particular response-time constraints for synchronize_rcu_expedited(), as it was designed for throughput rather than latency. However, some users now need sub-100-millisecond response-time constratints. This patch therefore follows Neeraj's suggestion (seconded by Tim and by Uladzislau Rezki) of simply reversing the two operations. Reported-by: Tim Murray Reported-by: Joel Fernandes Reported-by: Neeraj Upadhyay Reviewed-by: Neeraj Upadhyay Reviewed-by: Uladzislau Rezki (Sony) Tested-by: Tim Murray Cc: Todd Kjos Cc: Sandeep Patil Cc: # 5.4.x Signed-off-by: Paul E. McKenney Signed-off-by: Greg Kroah-Hartman

Revert "ath: add support for special 0x0 regulatory domain"

2022-03-28T07:57:10+00:00

commit 1ec7ed5163c70a0d040150d2279f932c7e7c143f upstream. This reverts commit 2dc016599cfa9672a147528ca26d70c3654a5423. Users are reporting regressions in regulatory domain detection and channel availability. The problem this was trying to resolve was fixed in firmware anyway: QCA6174 hw3.0: sdio-4.4.1: add firmware.bin_WLAN.RMH.4.4.1-00042 https://github.com/kvalo/ath10k-firmware/commit/4d382787f0efa77dba40394e0bc604f8eff82552 Link: https://bbs.archlinux.org/viewtopic.php?id=254535 Link: http://lists.infradead.org/pipermail/ath10k/2020-April/014871.html Link: http://lists.infradead.org/pipermail/ath10k/2020-May/015152.html Link: https://lore.kernel.org/all/1c160dfb-6ccc-b4d6-76f6-4364e0adb6dd@reox.at/ Fixes: 2dc016599cfa ("ath: add support for special 0x0 regulatory domain") Cc: Cc: Wen Gong Signed-off-by: Brian Norris Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200527165718.129307-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman

crypto: qat - disable registration of algorithms

2022-03-28T07:57:10+00:00

commit 8893d27ffcaf6ec6267038a177cb87bcde4dd3de upstream. The implementations of aead and skcipher in the QAT driver do not support properly requests with the CRYPTO_TFM_REQ_MAY_BACKLOG flag set. If the HW queue is full, the driver returns -EBUSY but does not enqueue the request. This can result in applications like dm-crypt waiting indefinitely for a completion of a request that was never submitted to the hardware. To avoid this problem, disable the registration of all crypto algorithms in the QAT driver by setting the number of crypto instances to 0 at configuration time. Cc: stable@vger.kernel.org Signed-off-by: Giovanni Cabiddu Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

ACPI: video: Force backlight native for Clevo NL5xRU and NL5xNU

2022-03-28T07:57:10+00:00

commit c844d22fe0c0b37dc809adbdde6ceb6462c43acf upstream. Clevo NL5xRU and NL5xNU/TUXEDO Aura 15 Gen1 and Gen2 have both a working native and video interface. However the default detection mechanism first registers the video interface before unregistering it again and switching to the native interface during boot. This results in a dangling SBIOS request for backlight change for some reason, causing the backlight to switch to ~2% once per boot on the first power cord connect or disconnect event. Setting the native interface explicitly circumvents this buggy behaviour by avoiding the unregistering process. Signed-off-by: Werner Sembach Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman