kernel/linux.git, branch v5.10.104

Linux 5.10.104

2022-03-08T18:09:39+00:00

Link: https://lore.kernel.org/r/20220307091644.179885033@linuxfoundation.org Tested-by: Fox Chen Tested-by: Pavel Machek (CIP) Link: https://lore.kernel.org/r/20220307162142.066663718@linuxfoundation.org Tested-by: Pavel Machek (CIP) Tested-by: Florian Fainelli Tested-by: Fox Chen Tested-by: Shuah Khan Tested-by: Hulk Robot Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Bagas Sanjaya Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

hamradio: fix macro redefine warning

2022-03-08T18:09:39+00:00

commit 16517829f2e02f096fb5ea9083d160381127faf3 upstream. MIPS/IA64 define END as assembly function ending, which conflict with END definition in mkiss.c, just undef it at first Reported-by: lkp@intel.com Signed-off-by: Huang Pei Signed-off-by: David S. Miller Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

Revert "xfrm: xfrm_state_mtu should return at least 1280 for ipv6"

2022-03-08T18:09:38+00:00

commit a6d95c5a628a09be129f25d5663a7e9db8261f51 upstream. This reverts commit b515d2637276a3810d6595e10ab02c13bfd0b63a. Commit b515d2637276a3810d6595e10ab02c13bfd0b63a ("xfrm: xfrm_state_mtu should return at least 1280 for ipv6") in v5.14 breaks the TCP MSS calculation in ipsec transport mode, resulting complete stalls of TCP connections. This happens when the (P)MTU is 1280 or slighly larger. The desired formula for the MSS is: MSS = (MTU - ESP_overhead) - IP header - TCP header However, the above commit clamps the (MTU - ESP_overhead) to a minimum of 1280, turning the formula into MSS = max(MTU - ESP overhead, 1280) - IP header - TCP header With the (P)MTU near 1280, the calculated MSS is too large and the resulting TCP packets never make it to the destination because they are over the actual PMTU. The above commit also causes suboptimal double fragmentation in xfrm tunnel mode, as described in https://lore.kernel.org/netdev/20210429202529.codhwpc7w6kbudug@dwarf.suse.cz/ The original problem the above commit was trying to fix is now fixed by commit 6596a0229541270fb8d38d989f91b78838e5e9da ("xfrm: fix MTU regression"). Signed-off-by: Jiri Bohac Signed-off-by: Steffen Klassert Signed-off-by: Greg Kroah-Hartman

btrfs: add missing run of delayed items after unlink during log replay

2022-03-08T18:09:38+00:00

commit 4751dc99627e4d1465c5bfa8cb7ab31ed418eff5 upstream. During log replay, whenever we need to check if a name (dentry) exists in a directory we do searches on the subvolume tree for inode references or or directory entries (BTRFS_DIR_INDEX_KEY keys, and BTRFS_DIR_ITEM_KEY keys as well, before kernel 5.17). However when during log replay we unlink a name, through btrfs_unlink_inode(), we may not delete inode references and dir index keys from a subvolume tree and instead just add the deletions to the delayed inode's delayed items, which will only be run when we commit the transaction used for log replay. This means that after an unlink operation during log replay, if we attempt to search for the same name during log replay, we will not see that the name was already deleted, since the deletion is recorded only on the delayed items. We run delayed items after every unlink operation during log replay, except at unlink_old_inode_refs() and at add_inode_ref(). This was due to an overlook, as delayed items should be run after evert unlink, for the reasons stated above. So fix those two cases. Fixes: 0d836392cadd5 ("Btrfs: fix mount failure after fsync due to hard link recreation") Fixes: 1f250e929a9c9 ("Btrfs: fix log replay failure after unlink and link combination") CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: qgroup: fix deadlock between rescan worker and remove qgroup

2022-03-08T18:09:38+00:00

commit d4aef1e122d8bbdc15ce3bd0bc813d6b44a7d63a upstream. The commit e804861bd4e6 ("btrfs: fix deadlock between quota disable and qgroup rescan worker") by Kawasaki resolves deadlock between quota disable and qgroup rescan worker. But also there is a deadlock case like it. It's about enabling or disabling quota and creating or removing qgroup. It can be reproduced in simple script below. for i in {1..100} do btrfs quota enable /mnt & btrfs qgroup create 1/0 /mnt & btrfs qgroup destroy 1/0 /mnt & btrfs quota disable /mnt & done Here's why the deadlock happens: 1) The quota rescan task is running. 2) Task A calls btrfs_quota_disable(), locks the qgroup_ioctl_lock mutex, and then calls btrfs_qgroup_wait_for_completion(), to wait for the quota rescan task to complete. 3) Task B calls btrfs_remove_qgroup() and it blocks when trying to lock the qgroup_ioctl_lock mutex, because it's being held by task A. At that point task B is holding a transaction handle for the current transaction. 4) The quota rescan task calls btrfs_commit_transaction(). This results in it waiting for all other tasks to release their handles on the transaction, but task B is blocked on the qgroup_ioctl_lock mutex while holding a handle on the transaction, and that mutex is being held by task A, which is waiting for the quota rescan task to complete, resulting in a deadlock between these 3 tasks. To resolve this issue, the thread disabling quota should unlock qgroup_ioctl_lock before waiting rescan completion. Move btrfs_qgroup_wait_for_completion() after unlock of qgroup_ioctl_lock. Fixes: e804861bd4e6 ("btrfs: fix deadlock between quota disable and qgroup rescan worker") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana Reviewed-by: Shin'ichiro Kawasaki Signed-off-by: Sidong Yang Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: fix lost prealloc extents beyond eof after full fsync

2022-03-08T18:09:38+00:00

commit d99478874355d3a7b9d86dfb5d7590d5b1754b1f upstream. When doing a full fsync, if we have prealloc extents beyond (or at) eof, and the leaves that contain them were not modified in the current transaction, we end up not logging them. This results in losing those extents when we replay the log after a power failure, since the inode is truncated to the current value of the logged i_size. Just like for the fast fsync path, we need to always log all prealloc extents starting at or beyond i_size. The fast fsync case was fixed in commit 471d557afed155 ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay") but it missed the full fsync path. The problem exists since the very early days, when the log tree was added by commit e02119d5a7b439 ("Btrfs: Add a write ahead tree log to optimize synchronous operations"). Example reproducer: $ mkfs.btrfs -f /dev/sdc $ mount /dev/sdc /mnt # Create our test file with many file extent items, so that they span # several leaves of metadata, even if the node/page size is 64K. Use # direct IO and not fsync/O_SYNC because it's both faster and it avoids # clearing the full sync flag from the inode - we want the fsync below # to trigger the slow full sync code path. $ xfs_io -f -d -c "pwrite -b 4K 0 16M" /mnt/foo # Now add two preallocated extents to our file without extending the # file's size. One right at i_size, and another further beyond, leaving # a gap between the two prealloc extents. $ xfs_io -c "falloc -k 16M 1M" /mnt/foo $ xfs_io -c "falloc -k 20M 1M" /mnt/foo # Make sure everything is durably persisted and the transaction is # committed. This makes all created extents to have a generation lower # than the generation of the transaction used by the next write and # fsync. sync # Now overwrite only the first extent, which will result in modifying # only the first leaf of metadata for our inode. Then fsync it. This # fsync will use the slow code path (inode full sync bit is set) because # it's the first fsync since the inode was created/loaded. $ xfs_io -c "pwrite 0 4K" -c "fsync" /mnt/foo # Extent list before power failure. $ xfs_io -c "fiemap -v" /mnt/foo /mnt/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 2178048..2178055 8 0x0 1: [8..16383]: 26632..43007 16376 0x0 2: [16384..32767]: 2156544..2172927 16384 0x0 3: [32768..34815]: 2172928..2174975 2048 0x800 4: [34816..40959]: hole 6144 5: [40960..43007]: 2174976..2177023 2048 0x801 # Mount fs again, trigger log replay. $ mount /dev/sdc /mnt # Extent list after power failure and log replay. $ xfs_io -c "fiemap -v" /mnt/foo /mnt/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..7]: 2178048..2178055 8 0x0 1: [8..16383]: 26632..43007 16376 0x0 2: [16384..32767]: 2156544..2172927 16384 0x1 # The prealloc extents at file offsets 16M and 20M are missing. So fix this by calling btrfs_log_prealloc_extents() when we are doing a full fsync, so that we always log all prealloc extents beyond eof. A test case for fstests will follow soon. CC: stable@vger.kernel.org # 4.19+ Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

tracing: Fix return value of __setup handlers

2022-03-08T18:09:38+00:00

commit 1d02b444b8d1345ea4708db3bab4db89a7784b55 upstream. __setup() handlers should generally return 1 to indicate that the boot options have been handled. Using invalid option values causes the entire kernel boot option string to be reported as Unknown and added to init's environment strings, polluting it. Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc6 kprobe_event=p,syscall_any,$arg1 trace_options=quiet trace_clock=jiffies", will be passed to user space. Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6 kprobe_event=p,syscall_any,$arg1 trace_options=quiet trace_clock=jiffies Return 1 from the __setup() handlers so that init's environment is not polluted with kernel boot options. Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Link: https://lkml.kernel.org/r/20220303031744.32356-1-rdunlap@infradead.org Cc: stable@vger.kernel.org Fixes: 7bcfaf54f591 ("tracing: Add trace_options kernel command line parameter") Fixes: e1e232ca6b8f ("tracing: Add trace_clock= kernel parameter") Fixes: 970988e19eb0 ("tracing/kprobe: Add kprobe_event= boot parameter") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Acked-by: Masami Hiramatsu Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

tracing/histogram: Fix sorting on old "cpu" value

2022-03-08T18:09:38+00:00

commit 1d1898f65616c4601208963c3376c1d828cbf2c7 upstream. When trying to add a histogram against an event with the "cpu" field, it was impossible due to "cpu" being a keyword to key off of the running CPU. So to fix this, it was changed to "common_cpu" to match the other generic fields (like "common_pid"). But since some scripts used "cpu" for keying off of the CPU (for events that did not have "cpu" as a field, which is most of them), a backward compatibility trick was added such that if "cpu" was used as a key, and the event did not have "cpu" as a field name, then it would fallback and switch over to "common_cpu". This fix has a couple of subtle bugs. One was that when switching over to "common_cpu", it did not change the field name, it just set a flag. But the code still found a "cpu" field. The "cpu" field is used for filtering and is returned when the event does not have a "cpu" field. This was found by: # cd /sys/kernel/tracing # echo hist:key=cpu,pid:sort=cpu > events/sched/sched_wakeup/trigger # cat events/sched/sched_wakeup/hist Which showed the histogram unsorted: { cpu: 19, pid: 1175 } hitcount: 1 { cpu: 6, pid: 239 } hitcount: 2 { cpu: 23, pid: 1186 } hitcount: 14 { cpu: 12, pid: 249 } hitcount: 2 { cpu: 3, pid: 994 } hitcount: 5 Instead of hard coding the "cpu" checks, take advantage of the fact that trace_event_field_field() returns a special field for "cpu" and "CPU" if the event does not have "cpu" as a field. This special field has the "filter_type" of "FILTER_CPU". Check that to test if the returned field is of the CPU type instead of doing the string compare. Also, fix the sorting bug by testing for the hist_field flag of HIST_FIELD_FL_CPU when setting up the sort routine. Otherwise it will use the special CPU field to know what compare routine to use, and since that special field does not have a size, it returns tracing_map_cmp_none. Cc: stable@vger.kernel.org Fixes: 1e3bac71c505 ("tracing/histogram: Rename "cpu" to "common_cpu"") Reported-by: Daniel Bristot de Oliveira Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman

HID: add mapping for KEY_ALL_APPLICATIONS

2022-03-08T18:09:38+00:00

commit 327b89f0acc4c20a06ed59e4d9af7f6d804dc2e2 upstream. This patch adds a new key definition for KEY_ALL_APPLICATIONS and aliases KEY_DASHBOARD to it. It also maps the 0x0c/0x2a2 usage code to KEY_ALL_APPLICATIONS. Signed-off-by: William Mahon Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20220303035618.1.I3a7746ad05d270161a18334ae06e3b6db1a1d339@changeid Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

HID: add mapping for KEY_DICTATE

2022-03-08T18:09:38+00:00

commit bfa26ba343c727e055223be04e08f2ebdd43c293 upstream. Numerous keyboards are adding dictate keys which allows for text messages to be dictated by a microphone. This patch adds a new key definition KEY_DICTATE and maps 0x0c/0x0d8 usage code to this new keycode. Additionally hid-debug is adjusted to recognize this new usage code as well. Signed-off-by: William Mahon Acked-by: Benjamin Tissoires Link: https://lore.kernel.org/r/20220303021501.1.I5dbf50eb1a7a6734ee727bda4a8573358c6d3ec0@changeid Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman