kernel/linux.git, branch v5.0.10

Linux 5.0.10

2019-04-27T07:37:45+00:00

kernel/sysctl.c: fix out-of-bounds access when setting file-max

2019-04-27T07:37:45+00:00

commit 9002b21465fa4d829edfc94a5a441005cffaa972 upstream. Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up min/max values for the file-max sysctl parameter via the .extra1 and .extra2 fields in the corresponding struct ctl_table entry. Unfortunately, the minimum value points at the global 'zero' variable, which is an int. This results in a KASAN splat when accessed as a long by proc_doulongvec_minmax on 64-bit architectures: | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0 | Read of size 8 at addr ffff2000133d1c20 by task systemd/1 | | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x228 | show_stack+0x14/0x20 | dump_stack+0xe8/0x124 | print_address_description+0x60/0x258 | kasan_report+0x140/0x1a0 | __asan_report_load8_noabort+0x18/0x20 | __do_proc_doulongvec_minmax+0x5d8/0x6a0 | proc_doulongvec_minmax+0x4c/0x78 | proc_sys_call_handler.isra.19+0x144/0x1d8 | proc_sys_write+0x34/0x58 | __vfs_write+0x54/0xe8 | vfs_write+0x124/0x3c0 | ksys_write+0xbc/0x168 | __arm64_sys_write+0x68/0x98 | el0_svc_common+0x100/0x258 | el0_svc_handler+0x48/0xc0 | el0_svc+0x8/0xc | | The buggy address belongs to the variable: | zero+0x0/0x40 | | Memory state around the buggy address: | ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa | ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 | ^ | ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 | ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix the splat by introducing a unsigned long 'zero_ul' and using that instead. Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max") Signed-off-by: Will Deacon Acked-by: Christian Brauner Cc: Kees Cook Cc: Alexey Dobriyan Cc: Matteo Croce Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

percpu: stop printing kernel addresses

2019-04-27T07:37:45+00:00

commit 00206a69ee32f03e6f40837684dcbe475ea02266 upstream. Since commit ad67b74d2469d9b8 ("printk: hash addresses printed with %p"), at boot "____ptrval____" is printed instead of actual addresses: percpu: Embedded 38 pages/cpu @(____ptrval____) s124376 r0 d31272 u524288 Instead of changing the print to "%px", and leaking kernel addresses, just remove the print completely, cfr. e.g. commit 071929dbdd865f77 ("arm64: Stop printing the virtual memory layout"). Signed-off-by: Matteo Croce Signed-off-by: Dennis Zhou Signed-off-by: Greg Kroah-Hartman

ALSA: info: Fix racy addition/deletion of nodes

2019-04-27T07:37:45+00:00

commit 8c2f870890fd28e023b0fcf49dcee333f2c8bad7 upstream. The ALSA proc helper manages the child nodes in a linked list, but its addition and deletion is done without any lock. This leads to a corruption if they are operated concurrently. Usually this isn't a problem because the proc entries are added sequentially in the driver probe procedure itself. But the card registrations are done often asynchronously, and the crash could be actually reproduced with syzkaller. This patch papers over it by protecting the link addition and deletion with the parent's mutex. There is "access" mutex that is used for the file access, and this can be reused for this purpose as well. Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com Cc: Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

mm/vmstat.c: fix /proc/vmstat format for CONFIG_DEBUG_TLBFLUSH=y CONFIG_SMP=n

2019-04-27T07:37:45+00:00

commit e8277b3b52240ec1caad8e6df278863e4bf42eac upstream. Commit 58bc4c34d249 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") depends on skipping vmstat entries with empty name introduced in 7aaf77272358 ("mm: don't show nr_indirectly_reclaimable in /proc/vmstat") but reverted in b29940c1abd7 ("mm: rename and change semantics of nr_indirectly_reclaimable_bytes"). So skipping no longer works and /proc/vmstat has misformatted lines " 0". This patch simply shows debug counters "nr_tlb_remote_*" for UP. Link: http://lkml.kernel.org/r/155481488468.467.4295519102880913454.stgit@buzz Fixes: 58bc4c34d249 ("mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properly") Signed-off-by: Konstantin Khlebnikov Acked-by: Vlastimil Babka Cc: Roman Gushchin Cc: Jann Horn Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

mm/memory_hotplug: do not unlock after failing to take the device_hotplug_lock

2019-04-27T07:37:45+00:00

commit 37803841c92d7b327147e0b1be3436423189e1cf upstream. When adding memory by probing a memory block in the sysfs interface, there is an obvious issue where we will unlock the device_hotplug_lock when we failed to takes it. That issue was introduced in 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock"). We should drop out in time when failing to take the device_hotplug_lock. Link: http://lkml.kernel.org/r/1554696437-9593-1-git-send-email-zhongjiang@huawei.com Fixes: 8df1d0e4a265 ("mm/memory_hotplug: make add_memory() take the device_hotplug_lock") Signed-off-by: zhong jiang Reported-by: Yang yingliang Acked-by: Michal Hocko Reviewed-by: David Hildenbrand Reviewed-by: Oscar Salvador Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

perf/ring_buffer: Fix AUX record suppression

2019-04-27T07:37:45+00:00

commit 339bc4183596e1f68c2c98a03b87aa124107c317 upstream. The following commit: 1627314fb54a33e ("perf: Suppress AUX/OVERWRITE records") has an unintended side-effect of also suppressing all AUX records with no flags and non-zero size, so all the regular records in the full trace mode. This breaks some use cases for people. Fix this by restoring "regular" AUX records. Reported-by: Ben Gainey Tested-by: Ben Gainey Signed-off-by: Alexander Shishkin Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Arnaldo Carvalho de Melo Cc: Jiri Olsa Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Fixes: 1627314fb54a33e ("perf: Suppress AUX/OVERWRITE records") Link: https://lkml.kernel.org/r/20190329091338.29999-1-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

device_cgroup: fix RCU imbalance in error case

2019-04-27T07:37:44+00:00

commit 0fcc4c8c044e117ac126ab6df4138ea9a67fa2a9 upstream. When dev_exception_add() returns an error (due to a failed memory allocation), make sure that we move the RCU preemption count back to where it was before we were called. We dropped the RCU read lock inside the loop body, so we can't just "break". sparse complains about this, too: $ make -s C=2 security/device_cgroup.o ./include/linux/rcupdate.h:647:9: warning: context imbalance in 'propagate_exception' - unexpected unlock Fixes: d591fb56618f ("device_cgroup: simplify cgroup tree walk in propagate_exception()") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Acked-by: Michal Hocko Signed-off-by: Tejun Heo Signed-off-by: Greg Kroah-Hartman

mt76x02: avoid status_list.lock and sta->rate_ctrl_lock dependency

2019-04-27T07:37:44+00:00

commit bafdf85dfa59374f927ff597bc8c259193afda30 upstream. Move ieee80211_tx_status_ext() outside of status_list lock section in order to avoid locking dependency and possible deadlock reposed by LOCKDEP in below warning. Also do mt76_tx_status_lock() just before it's needed. [ 440.224832] WARNING: possible circular locking dependency detected [ 440.224833] 5.1.0-rc2+ #22 Not tainted [ 440.224834] ------------------------------------------------------ [ 440.224835] kworker/u16:28/2362 is trying to acquire lock: [ 440.224836] 0000000089b8cacf (&(&q->lock)->rlock#2){+.-.}, at: mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.224842] but task is already holding lock: [ 440.224842] 000000002cfedc59 (&(&sta->lock)->rlock){+.-.}, at: ieee80211_stop_tx_ba_cb+0x32/0x1f0 [mac80211] [ 440.224863] which lock already depends on the new lock. [ 440.224863] the existing dependency chain (in reverse order) is: [ 440.224864] -> #3 (&(&sta->lock)->rlock){+.-.}: [ 440.224869] _raw_spin_lock_bh+0x34/0x40 [ 440.224880] ieee80211_start_tx_ba_session+0xe4/0x3d0 [mac80211] [ 440.224894] minstrel_ht_get_rate+0x45c/0x510 [mac80211] [ 440.224906] rate_control_get_rate+0xc1/0x140 [mac80211] [ 440.224918] ieee80211_tx_h_rate_ctrl+0x195/0x3c0 [mac80211] [ 440.224930] ieee80211_xmit_fast+0x26d/0xa50 [mac80211] [ 440.224942] __ieee80211_subif_start_xmit+0xfc/0x310 [mac80211] [ 440.224954] ieee80211_subif_start_xmit+0x38/0x390 [mac80211] [ 440.224956] dev_hard_start_xmit+0xb8/0x300 [ 440.224957] __dev_queue_xmit+0x7d4/0xbb0 [ 440.224968] ip6_finish_output2+0x246/0x860 [ipv6] [ 440.224978] mld_sendpack+0x1bd/0x360 [ipv6] [ 440.224987] mld_ifc_timer_expire+0x1a4/0x2f0 [ipv6] [ 440.224989] call_timer_fn+0x89/0x2a0 [ 440.224990] run_timer_softirq+0x1bd/0x4d0 [ 440.224992] __do_softirq+0xdb/0x47c [ 440.224994] irq_exit+0xfa/0x100 [ 440.224996] smp_apic_timer_interrupt+0x9a/0x220 [ 440.224997] apic_timer_interrupt+0xf/0x20 [ 440.224999] cpuidle_enter_state+0xc1/0x470 [ 440.225000] do_idle+0x21a/0x260 [ 440.225001] cpu_startup_entry+0x19/0x20 [ 440.225004] start_secondary+0x135/0x170 [ 440.225006] secondary_startup_64+0xa4/0xb0 [ 440.225007] -> #2 (&(&sta->rate_ctrl_lock)->rlock){+.-.}: [ 440.225009] _raw_spin_lock_bh+0x34/0x40 [ 440.225022] rate_control_tx_status+0x4f/0xb0 [mac80211] [ 440.225031] ieee80211_tx_status_ext+0x142/0x1a0 [mac80211] [ 440.225035] mt76x02_send_tx_status+0x2e4/0x340 [mt76x02_lib] [ 440.225037] mt76x02_tx_status_data+0x31/0x40 [mt76x02_lib] [ 440.225040] mt76u_tx_status_data+0x51/0xa0 [mt76_usb] [ 440.225042] process_one_work+0x237/0x5d0 [ 440.225043] worker_thread+0x3c/0x390 [ 440.225045] kthread+0x11d/0x140 [ 440.225046] ret_from_fork+0x3a/0x50 [ 440.225047] -> #1 (&(&list->lock)->rlock#8){+.-.}: [ 440.225049] _raw_spin_lock_bh+0x34/0x40 [ 440.225052] mt76_tx_status_skb_add+0x51/0x100 [mt76] [ 440.225054] mt76x02u_tx_prepare_skb+0xbd/0x116 [mt76x02_usb] [ 440.225056] mt76u_tx_queue_skb+0x5f/0x180 [mt76_usb] [ 440.225058] mt76_tx+0x93/0x190 [mt76] [ 440.225070] ieee80211_tx_frags+0x148/0x210 [mac80211] [ 440.225081] __ieee80211_tx+0x75/0x1b0 [mac80211] [ 440.225092] ieee80211_tx+0xde/0x110 [mac80211] [ 440.225105] __ieee80211_tx_skb_tid_band+0x72/0x90 [mac80211] [ 440.225122] ieee80211_send_auth+0x1f3/0x360 [mac80211] [ 440.225141] ieee80211_auth.cold.40+0x6c/0x100 [mac80211] [ 440.225156] ieee80211_mgd_auth.cold.50+0x132/0x15f [mac80211] [ 440.225171] cfg80211_mlme_auth+0x149/0x360 [cfg80211] [ 440.225181] nl80211_authenticate+0x273/0x2e0 [cfg80211] [ 440.225183] genl_family_rcv_msg+0x196/0x3a0 [ 440.225184] genl_rcv_msg+0x47/0x8e [ 440.225185] netlink_rcv_skb+0x3a/0xf0 [ 440.225187] genl_rcv+0x24/0x40 [ 440.225188] netlink_unicast+0x16d/0x210 [ 440.225189] netlink_sendmsg+0x204/0x3b0 [ 440.225191] sock_sendmsg+0x36/0x40 [ 440.225193] ___sys_sendmsg+0x259/0x2b0 [ 440.225194] __sys_sendmsg+0x47/0x80 [ 440.225196] do_syscall_64+0x60/0x1f0 [ 440.225197] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 440.225198] -> #0 (&(&q->lock)->rlock#2){+.-.}: [ 440.225200] lock_acquire+0xb9/0x1a0 [ 440.225202] _raw_spin_lock_bh+0x34/0x40 [ 440.225204] mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225215] ieee80211_agg_start_txq+0xe8/0x2b0 [mac80211] [ 440.225225] ieee80211_stop_tx_ba_cb+0xb8/0x1f0 [mac80211] [ 440.225235] ieee80211_ba_session_work+0x1c1/0x2f0 [mac80211] [ 440.225236] process_one_work+0x237/0x5d0 [ 440.225237] worker_thread+0x3c/0x390 [ 440.225239] kthread+0x11d/0x140 [ 440.225240] ret_from_fork+0x3a/0x50 [ 440.225240] other info that might help us debug this: [ 440.225241] Chain exists of: &(&q->lock)->rlock#2 --> &(&sta->rate_ctrl_lock)->rlock --> &(&sta->lock)->rlock [ 440.225243] Possible unsafe locking scenario: [ 440.225244] CPU0 CPU1 [ 440.225244] ---- ---- [ 440.225245] lock(&(&sta->lock)->rlock); [ 440.225245] lock(&(&sta->rate_ctrl_lock)->rlock); [ 440.225246] lock(&(&sta->lock)->rlock); [ 440.225247] lock(&(&q->lock)->rlock#2); [ 440.225248] *** DEADLOCK *** [ 440.225249] 5 locks held by kworker/u16:28/2362: [ 440.225250] #0: 0000000048fcd291 ((wq_completion)phy0){+.+.}, at: process_one_work+0x1b5/0x5d0 [ 440.225252] #1: 00000000f1c6828f ((work_completion)(&sta->ampdu_mlme.work)){+.+.}, at: process_one_work+0x1b5/0x5d0 [ 440.225254] #2: 00000000433d2b2c (&sta->ampdu_mlme.mtx){+.+.}, at: ieee80211_ba_session_work+0x5c/0x2f0 [mac80211] [ 440.225265] #3: 000000002cfedc59 (&(&sta->lock)->rlock){+.-.}, at: ieee80211_stop_tx_ba_cb+0x32/0x1f0 [mac80211] [ 440.225276] #4: 000000009d7b9a44 (rcu_read_lock){....}, at: ieee80211_agg_start_txq+0x33/0x2b0 [mac80211] [ 440.225286] stack backtrace: [ 440.225288] CPU: 2 PID: 2362 Comm: kworker/u16:28 Not tainted 5.1.0-rc2+ #22 [ 440.225289] Hardware name: LENOVO 20KGS23S0P/20KGS23S0P, BIOS N23ET55W (1.30 ) 08/31/2018 [ 440.225300] Workqueue: phy0 ieee80211_ba_session_work [mac80211] [ 440.225301] Call Trace: [ 440.225304] dump_stack+0x85/0xc0 [ 440.225306] print_circular_bug.isra.38.cold.58+0x15c/0x195 [ 440.225307] check_prev_add.constprop.48+0x5f0/0xc00 [ 440.225309] ? check_prev_add.constprop.48+0x39d/0xc00 [ 440.225311] ? __lock_acquire+0x41d/0x1100 [ 440.225312] __lock_acquire+0xd98/0x1100 [ 440.225313] ? __lock_acquire+0x41d/0x1100 [ 440.225315] lock_acquire+0xb9/0x1a0 [ 440.225317] ? mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225319] _raw_spin_lock_bh+0x34/0x40 [ 440.225321] ? mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225323] mt76_wake_tx_queue+0x4c/0xb0 [mt76] [ 440.225334] ieee80211_agg_start_txq+0xe8/0x2b0 [mac80211] [ 440.225344] ieee80211_stop_tx_ba_cb+0xb8/0x1f0 [mac80211] [ 440.225354] ieee80211_ba_session_work+0x1c1/0x2f0 [mac80211] [ 440.225356] process_one_work+0x237/0x5d0 [ 440.225358] worker_thread+0x3c/0x390 [ 440.225359] ? wq_calc_node_cpumask+0x70/0x70 [ 440.225360] kthread+0x11d/0x140 [ 440.225362] ? kthread_create_on_node+0x40/0x40 [ 440.225363] ret_from_fork+0x3a/0x50 Cc: stable@vger.kernel.org Fixes: 88046b2c9f6d ("mt76: add support for reporting tx status with skb") Signed-off-by: Stanislaw Gruszka Acked-by: Felix Fietkau Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

tpm: fix an invalid condition in tpm_common_poll

2019-04-27T07:37:44+00:00

[ Upstream commit 7110629263469b4664d00b38ef80a656eddf3637 ] The poll condition should only check response_length, because reads should only be issued if there is data to read. The response_read flag only prevents double writes. The problem was that the write set the response_read to false, enqued a tpm job, and returned. Then application called poll which checked the response_read flag and returned EPOLLIN. Then the application called read, but got nothing. After all that the async_work kicked in. Added also mutex_lock around the poll check to prevent other possible race conditions. Fixes: 9488585b21bef0df12 ("tpm: add support for partial reads") Reported-by: Mantas Mikulėnas Tested-by: Mantas Mikulėnas Signed-off-by: Tadeusz Struk Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: James Morris Signed-off-by: Sasha Levin