kernel/linux.git, branch v4.9.4

Linux 4.9.4

2017-01-15T12:43:07+00:00

rtlwifi: rtl_usb: Fix missing entry in USB driver's private data

2017-01-15T12:42:58+00:00

commit 60f59ce0278557f7896d5158ae6d12a4855a72cc upstream. These drivers need to be able to reference "struct ieee80211_hw" from the driver's private data, and vice versa. The USB driver failed to store the address of ieee80211_hw in the private data. Although this bug has been present for a long time, it was not exposed until commit ba9f93f82aba ("rtlwifi: Fix enter/exit power_save"). Fixes: ba9f93f82aba ("rtlwifi: Fix enter/exit power_save") Signed-off-by: Larry Finger Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

rtlwifi: Fix enter/exit power_save

2017-01-15T12:42:57+00:00

commit ba9f93f82abafe2552eac942ebb11c2df4f8dd7f upstream. In commit a5ffbe0a1993 ("rtlwifi: Fix scheduling while atomic bug") and commit a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue"), an error was introduced in the power-save routines due to the fact that leaving PS was delayed by the use of a work queue. This problem is fixed by detecting if the enter or leave routines are in interrupt mode. If so, the workqueue is used to place the request. If in normal mode, the enter or leave routines are called directly. Fixes: a269913c52ad ("rtlwifi: Rework rtl_lps_leave() and rtl_lps_enter() to use work queue") Reported-by: Ping-Ke Shih Signed-off-by: Larry Finger Cc: Stable Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

drm/i915/gen9: Fix PCODE polling during CDCLK change notification

2017-01-15T12:42:57+00:00

commit 2c7d0602c815277f7cb7c932b091288710d8aba7 upstream. commit 848496e5902833600f7992f4faa82dc1546051ba Author: Ville Syrjälä Date: Wed Jul 13 16:32:03 2016 +0300 drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL increased the timeout to match the spec, but we still see a timeout on at least one SKL. A CDCLK change request following the failed one will succeed nevertheless. I could reproduce this problem easily by running kms_pipe_crc_basic in a loop. In all failure cases _wait_for() was pre-empted for >3ms and so in the worst case - when the pre-emption happened right after calculating timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only once which failed and so _wait_for() timed out. As opposed to this the spec says to keep retrying the request for at most a 3ms period. To fix this send the first request explicitly to guarantee that there is 3ms between the first and last request. Though this matches the spec, I noticed that in rare cases this can still time out if we sent only a few requests (in the worst case 2) _and_ PCODE is busy for some reason even after a previous request and a 3ms delay. To work around this retry the polling with pre-emption disabled to maximize the number of requests. Also increase the timeout to 10ms to account for interrupts that could reduce the number of requests. With this change I couldn't trigger the problem. v2: - Use 1ms poll period instead of 10us. (Chris) v3: - Poll with pre-emption disabled to increase the number of request attempts. (Ville, Chris) - Factor out a helper to poll, it's also needed by the next patch. v4: - Pass reply_mask, reply to skl_pcode_request(), instead of assuming the reply is generic. (Ville) v5: - List the request specific timeout values as code comment. (Ville) v6: - Try the poll first with preemption enabled. - Add code comment about first request being queued by PCODE. (Art) - Add timeout_base_ms argument. (Ville) v7: - Clarify code comment about first queued request. (Chris) Cc: Ville Syrjälä Cc: Chris Wilson Cc: Art Runyan Cc: # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms Cc: # v4.2- Fixes: 5d96d8afcfbb ("drm/i915/skl: Deinit/init the display at suspend/resume") Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929 Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B Signed-off-by: Imre Deak Reviewed-by: Chris Wilson Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com (cherry picked from commit a0b8a1fe34430c3a82258e8cb45f5968bdf31afd) Signed-off-by: Jani Nikula Signed-off-by: Greg Kroah-Hartman

ALSA: usb-audio: Add a quirk for Plantronics BT600

2017-01-15T12:42:57+00:00

commit 2e40795c3bf344cfb5220d94566205796e3ef19a upstream. Plantronics BT600 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1" and "cannot get freq at ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and avoids those error messages. Signed-off-by: Dennis Kadioglu Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman

spi: mvebu: fix baudrate calculation for armada variant

2017-01-15T12:42:57+00:00

commit 7243e0b20729d372e97763617a7a9c89f29b33e1 upstream. The calculation of SPR and SPPR doesn't round correctly at several places which might result in baud rates that are too big. For example with tclk_hz = 250000001 and target rate 25000000 it determined a divider of 10 which is wrong. Instead of fixing all the corner cases replace the calculation by an algorithm without a loop which should even be quicker to execute apart from being correct. Fixes: df59fa7f4bca ("spi: orion: support armada extended baud rates") Signed-off-by: Uwe Kleine-König Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

ARM: omap2+: am437x: rollback to use omap3_gptimer_timer_init()

2017-01-15T12:42:57+00:00

commit f86a2c875fd146d9b82c8fdd86d31084507bcf4c upstream. The commit 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") unintentionally changes the clocksource devices for AM437x from OMAP GP Timer to SyncTimer32K. Unfortunately, the SyncTimer32K is starving from frequency deviation as mentioned in commit 5b5c01359152 ("ARM: OMAP2+: AM43x: Use gptimer as clocksource") and, as reported by Franklin [1], even its monotonic nature is under question (most probably there is a HW issue, but it's still under investigation). Taking into account above facts It's reasonable to rollback to the use of omap3_gptimer_timer_init(). [1] http://www.spinics.net/lists/linux-omap/msg127425.html Fixes: 55ee7017ee31 ("arm: omap2: board-generic: use omap4_local_timer_init for AM437x") Reported-by: Cooper Jr., Franklin Signed-off-by: Grygorii Strashko Signed-off-by: Lokesh Vutla Signed-off-by: Keerthy Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ARM: 8631/1: clkdev: Detect errors in clk_hw_register_clkdev() for mass registration

2017-01-15T12:42:57+00:00

commit 9388093db44356af911adf3d355b7544a13a63cd upstream. Unlike clk_register_clkdev(), clk_hw_register_clkdev() doesn't check for passed error objects from a previous registration call. Hence the caller of clk_hw_register_*() has to check for errors before calling clk_hw_register_clkdev*(). Make clk_hw_register_clkdev() more similar to clk_register_clkdev() by adding this error check, removing the burden from callers that do mass registration. Fixes: e4f1b49bda6d6aa2 ("clkdev: Add clk_hw based registration APIs") Fixes: 944b9a41e004534f ("clk: ls1x: Migrate to clk_hw based OF and registration APIs") Fixes: 44ce9a9ae977736f ("MIPS: TXx9: Convert to Common Clock Framework") Fixes: f48d947a162dfa9d ("clk: clps711x: Migrate to clk_hw based OF and registration APIs") Fixes: b4626a7f489238a5 ("CLK: Add Loongson1C clock support") Signed-off-by: Geert Uytterhoeven Signed-off-by: Russell King Signed-off-by: Greg Kroah-Hartman

ARM: OMAP4+: Fix bad fallthrough for cpuidle

2017-01-15T12:42:57+00:00

commit cbf2642872333547b56b8c4d943f5ed04ac9a4ee upstream. We don't want to fall through to a bunch of errors for retention if PM_OMAP4_CPU_OSWR_DISABLE is not configured for a SoC. Fixes: 6099dd37c669 ("ARM: OMAP5 / DRA7: Enable CPU RET on suspend") Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ARM: OMAP5: Fix build for PM code

2017-01-15T12:42:57+00:00

commit da6d5993bf951846956903bee4f0eafd918250db upstream. It's CONFIG_SOC_OMAP5, not CONFIG_ARCH_OMAP5. Looks like make randconfig builds have not hit this one yet. Fixes: b3bf289c1c45 ("ARM: OMAP2+: Fix build with CONFIG_SMP and CONFIG_PM is not set") Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman