kernel/linux.git, branch v4.9.253

Linux 4.9.253

2021-01-23T14:38:19+00:00

Tested-by: Shuah Khan Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Link: https://lore.kernel.org/r/20210122160829.171484729@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

spi: cadence: cache reference clock rate during probe

2021-01-23T14:38:19+00:00

commit 4d163ad79b155c71bf30366dc38f8d2502f78844 upstream. The issue is that using SPI from a callback under the CCF lock will deadlock, since this code uses clk_get_rate(). Fixes: c474b38665463 ("spi: Add driver for Cadence SPI controller") Signed-off-by: Michael Hennerich Signed-off-by: Alexandru Ardelean Link: https://lore.kernel.org/r/20210114154217.51996-1-alexandru.ardelean@analog.com Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

tipc: fix NULL deref in tipc_link_xmit()

2021-01-23T14:38:19+00:00

[ Upstream commit b77413446408fdd256599daf00d5be72b5f3e7c6 ] The buffer list can have zero skb as following path: tipc_named_node_up()->tipc_node_xmit()->tipc_link_xmit(), so we need to check the list before casting an &sk_buff. Fault report: [] tipc: Bulk publication failure [] general protection fault, probably for non-canonical [#1] PREEMPT [...] [] KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] [] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 5.10.0-rc4+ #2 [] Hardware name: Bochs ..., BIOS Bochs 01/01/2011 [] RIP: 0010:tipc_link_xmit+0xc1/0x2180 [] Code: 24 b8 00 00 00 00 4d 39 ec 4c 0f 44 e8 e8 d7 0a 10 f9 48 [...] [] RSP: 0018:ffffc90000006ea0 EFLAGS: 00010202 [] RAX: dffffc0000000000 RBX: ffff8880224da000 RCX: 1ffff11003d3cc0d [] RDX: 0000000000000019 RSI: ffffffff886007b9 RDI: 00000000000000c8 [] RBP: ffffc90000007018 R08: 0000000000000001 R09: fffff52000000ded [] R10: 0000000000000003 R11: fffff52000000dec R12: ffffc90000007148 [] R13: 0000000000000000 R14: 0000000000000000 R15: ffffc90000007018 [] FS: 0000000000000000(0000) GS:ffff888037400000(0000) knlGS:000[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 00007fffd2db5000 CR3: 000000002b08f000 CR4: 00000000000006f0 Fixes: af9b028e270fd ("tipc: make media xmit call outside node spinlock context") Acked-by: Jon Maloy Signed-off-by: Hoang Le Link: https://lore.kernel.org/r/20210108071337.3598-1-hoang.h.le@dektech.com.au Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

rxrpc: Fix handling of an unsupported token type in rxrpc_read()

2021-01-23T14:38:19+00:00

[ Upstream commit d52e419ac8b50c8bef41b398ed13528e75d7ad48 ] Clang static analysis reports the following: net/rxrpc/key.c:657:11: warning: Assigned value is garbage or undefined toksize = toksizes[tok++]; ^ ~~~~~~~~~~~~~~~ rxrpc_read() contains two consecutive loops. The first loop calculates the token sizes and stores the results in toksizes[] and the second one uses the array. When there is an error in identifying the token in the first loop, the token is skipped, no change is made to the toksizes[] array. When the same error happens in the second loop, the token is not skipped. This will cause the toksizes[] array to be out of step and will overrun past the calculated sizes. Fix this by making both loops log a message and return an error in this case. This should only happen if a new token type is incompletely implemented, so it should normally be impossible to trigger this. Fixes: 9a059cd5ca7d ("rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read()") Reported-by: Tom Rix Signed-off-by: David Howells Reviewed-by: Tom Rix Link: https://lore.kernel.org/r/161046503122.2445787.16714129930607546635.stgit@warthog.procyon.org.uk Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: avoid 32 x truesize under-estimation for tiny skbs

2021-01-23T14:38:18+00:00

[ Upstream commit 3226b158e67cfaa677fd180152bfb28989cb2fac ] Both virtio net and napi_get_frags() allocate skbs with a very small skb->head While using page fragments instead of a kmalloc backed skb->head might give a small performance improvement in some cases, there is a huge risk of under estimating memory usage. For both GOOD_COPY_LEN and GRO_MAX_HEAD, we can fit at least 32 allocations per page (order-3 page in x86), or even 64 on PowerPC We have been tracking OOM issues on GKE hosts hitting tcp_mem limits but consuming far more memory for TCP buffers than instructed in tcp_mem[2] Even if we force napi_alloc_skb() to only use order-0 pages, the issue would still be there on arches with PAGE_SIZE >= 32768 This patch makes sure that small skb head are kmalloc backed, so that other objects in the slab page can be reused instead of being held as long as skbs are sitting in socket queues. Note that we might in the future use the sk_buff napi cache, instead of going through a more expensive __alloc_skb() Another idea would be to use separate page sizes depending on the allocated length (to never have more than 4 frags per page) I would like to thank Greg Thelen for his precious help on this matter, analysing crash dumps is always a time consuming task. Fixes: fd11a83dd363 ("net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skb") Signed-off-by: Eric Dumazet Cc: Paolo Abeni Cc: Greg Thelen Reviewed-by: Alexander Duyck Acked-by: Michael S. Tsirkin Link: https://lore.kernel.org/r/20210113161819.1155526-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: sit: unregister_netdevice on newlink's error path

2021-01-23T14:38:18+00:00

[ Upstream commit 47e4bb147a96f1c9b4e7691e7e994e53838bfff8 ] We need to unregister the netdevice if config failed. .ndo_uninit takes care of most of the heavy lifting. This was uncovered by recent commit c269a24ce057 ("net: make free_netdev() more lenient with unregistering devices"). Previously the partially-initialized device would be left in the system. Reported-and-tested-by: syzbot+2393580080a2da190f04@syzkaller.appspotmail.com Fixes: e2f1f072db8d ("sit: allow to configure 6rd tunnels via netlink") Acked-by: Nicolas Dichtel Link: https://lore.kernel.org/r/20210114012947.2515313-1-kuba@kernel.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dcb: Accept RTM_GETDCB messages carrying set-like DCB commands

2021-01-23T14:38:18+00:00

[ Upstream commit df85bc140a4d6cbaa78d8e9c35154e1a2f0622c7 ] In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler"), Linux started rejecting RTM_GETDCB netlink messages if they contained a set-like DCB_CMD_ command. The reason was that privileges were only verified for RTM_SETDCB messages, but the value that determined the action to be taken is the command, not the message type. And validation of message type against the DCB command was the obvious missing piece. Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool for configuration of DCB, accesses the DCB set-like APIs through RTM_GETDCB. Therefore do not bounce the discrepancy between message type and command. Instead, in addition to validating privileges based on the actual message type, validate them also based on the expected message type. This closes the loophole of allowing DCB configuration on non-admin accounts, while maintaining backward compatibility. Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Fixes: 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler") Signed-off-by: Petr Machata Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

net: dcb: Validate netlink message in DCB handler

2021-01-23T14:38:18+00:00

[ Upstream commit 826f328e2b7e8854dd42ea44e6519cd75018e7b1 ] DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have the CAP_NET_ADMIN capability. However, the operation to be performed is not decided from the DCB message type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for reading DCB objects, the corresponding SET and DEL commands are used for manipulation. The assumption is that set-like commands will be sent via an RTM_SETDCB message, and get-like ones via RTM_GETDCB. However, this assumption is not enforced. It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN capability by sending the corresponding command in an RTM_GETDCB message. That is a bug. Fix it by validating the type of the request message against the type used for the response. Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver") Signed-off-by: Petr Machata Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

rndis_host: set proper input size for OID_GEN_PHYSICAL_MEDIUM request

2021-01-23T14:38:18+00:00

[ Upstream commit e56b3d94d939f52d46209b9e1b6700c5bfff3123 ] MSFT ActiveSync implementation requires that the size of the response for incoming query is to be provided in the request input length. Failure to set the input size proper results in failed request transfer, where the ActiveSync counterpart reports the NDIS_STATUS_INVALID_LENGTH (0xC0010014L) error. Set the input size for OID_GEN_PHYSICAL_MEDIUM query to the expected size of the response in order for the ActiveSync to properly respond to the request. Fixes: 039ee17d1baa ("rndis_host: Add RNDIS physical medium checking into generic_rndis_bind()") Signed-off-by: Andrey Zhizhikin Link: https://lore.kernel.org/r/20210108095839.3335-1-andrey.zhizhikin@leica-geosystems.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

netxen_nic: fix MSI/MSI-x interrupts

2021-01-23T14:38:18+00:00

[ Upstream commit a2bc221b972db91e4be1970e776e98f16aa87904 ] For all PCI functions on the netxen_nic adapter, interrupt mode (INTx or MSI) configuration is dependent on what has been configured by the PCI function zero in the shared interrupt register, as these adapters do not support mixed mode interrupts among the functions of a given adapter. Logic for setting MSI/MSI-x interrupt mode in the shared interrupt register based on PCI function id zero check is not appropriate for all family of netxen adapters, as for some of the netxen family adapters PCI function zero is not really meant to be probed/loaded in the host but rather just act as a management function on the device, which caused all the other PCI functions on the adapter to always use legacy interrupt (INTx) mode instead of choosing MSI/MSI-x interrupt mode. This patch replaces that check with port number so that for all type of adapters driver attempts for MSI/MSI-x interrupt modes. Fixes: b37eb210c076 ("netxen_nic: Avoid mixed mode interrupts") Signed-off-by: Manish Chopra Signed-off-by: Igor Russkikh Link: https://lore.kernel.org/r/20210107101520.6735-1-manishc@marvell.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman