kernel/linux.git, branch v4.9.179

Linux 4.9.179

2019-05-25T16:26:58+00:00

fbdev: sm712fb: fix memory frequency by avoiding a switch/case fallthrough

2019-05-25T16:26:58+00:00

commit 9dc20113988b9a75ea6b3abd68dc45e2d73ccdab upstream. A fallthrough in switch/case was introduced in f627caf55b8e ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting"), due to my copy-paste error, which would cause the memory clock frequency for SM720 to be programmed to SM712. Since it only reprograms the clock to a different frequency, it's only a benign issue without visible side-effect, so it also evaded Sudip Mukherjee's code review and regression tests. scripts/checkpatch.pl also failed to discover the issue, possibly due to nested switch statements. This issue was found by Stephen Rothwell by building linux-next with -Wimplicit-fallthrough. Reported-by: Stephen Rothwell Fixes: f627caf55b8e ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting") Signed-off-by: Yifeng Li Cc: Sudip Mukherjee Cc: "Gustavo A. R. Silva" Cc: Kees Cook Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman

btrfs: Honour FITRIM range constraints during free space trim

2019-05-25T16:26:57+00:00

commit c2d1b3aae33605a61cbab445d8ae1c708ccd2698 upstream. Up until now trimming the freespace was done irrespective of what the arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments will be entirely ignored. Fix it by correctly handling those paramter. This requires breaking if the found freespace extent is after the end of the passed range as well as completing trim after trimming fstrim_range::len bytes. Fixes: 499f377f49f0 ("btrfs: iterate over unused chunk space in FITRIM") CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Nikolay Borisov Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

md/raid: raid5 preserve the writeback action after the parity check

2019-05-25T16:26:57+00:00

commit b2176a1dfb518d870ee073445d27055fea64dfb8 upstream. The problem is that any 'uptodate' vs 'disks' check is not precise in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the device that might try to kick off writes and then skip the action. Better to prevent the raid driver from taking unexpected action *and* keep the system alive vs killing the machine with BUG_ON. Note: fixed warning reported by kbuild test robot Signed-off-by: Dan Williams Signed-off-by: Nigel Croxon Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman

Revert "Don't jump to compute_result state from check_result state"

2019-05-25T16:26:57+00:00

commit a25d8c327bb41742dbd59f8c545f59f3b9c39983 upstream. This reverts commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef. Cc: Dan Williams Cc: Nigel Croxon Cc: Xiao Ni Signed-off-by: Song Liu Signed-off-by: Greg Kroah-Hartman

perf bench numa: Add define for RUSAGE_THREAD if not present

2019-05-25T16:26:56+00:00

[ Upstream commit bf561d3c13423fc54daa19b5d49dc15fafdb7acc ] While cross building perf to the ARC architecture on a fedora 30 host, we were failing with: CC /tmp/build/perf/bench/numa.o bench/numa.c: In function ‘worker_thread’: bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’? getrusage(RUSAGE_THREAD, &rusage); ^~~~~~~~~~~~~ SIGEV_THREAD bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in [perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1 arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225 [perfbuilder@60d5802468f6 perf]$ Trying to reproduce a report by Vineet, I noticed that, with just cross-built zlib and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define, check for that and numactl libraries, I ended up with the above failure. So, since RUSAGE_THREAD is available as a define in the system headers, check if it is defined in the 'perf bench numa' sources and define it if not. Now it builds and I have to figure out if the problem reported by Vineet only takes place if we have libelf or some other library available. Cc: Arnd Bergmann Cc: Jiri Olsa Cc: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim Cc: Vineet Gupta Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour

2019-05-25T16:26:56+00:00

[ Upstream commit 4e9036042fedaffcd868d7f7aa948756c48c637d ] To choose whether to pick the GID from the old (16bit) or new (32bit) field, we should check if the old gid field is set to 0xffff. Mainline checks the old *UID* field instead - cut'n'paste from the corresponding code in ufs_get_inode_uid(). Fixes: 252e211e90ce Signed-off-by: Al Viro Signed-off-by: Sasha Levin

power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG

2019-05-25T16:26:56+00:00

[ Upstream commit 349ced9984ff540ce74ca8a0b2e9b03dc434b9dd ] Fix a similar endless event loop as was done in commit 8dcf32175b4e ("i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE"): The culprit is the dev_dbg printk in the i2c uevent handler. If this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results in an endless loop with systemd-journald. This happens if user-space scans the system log and reads the uevent file to get information about a newly created device, which seems fair use to me. Unfortunately reading the "uevent" file uses the same function that runs for creating the uevent for a new device, generating the next syslog entry Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former seems to have been fixed. Drop debug prints as it was done in I2C subsystem to resolve the issue. Signed-off-by: Andrey Smirnov Cc: Chris Healy Cc: linux-pm@vger.kernel.org Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin

KVM: arm/arm64: Ensure vcpu target is unset on reset failure

2019-05-25T16:26:56+00:00

[ Upstream commit 811328fc3222f7b55846de0cd0404339e2e1e6d7 ] A failed KVM_ARM_VCPU_INIT should not set the vcpu target, as the vcpu target is used by kvm_vcpu_initialized() to determine if other vcpu ioctls may proceed. We need to set the target before calling kvm_reset_vcpu(), but if that call fails, we should then unset it and clear the feature bitmap while we're at it. Signed-off-by: Andrew Jones [maz: Simplified patch, completed commit message] Signed-off-by: Marc Zyngier Signed-off-by: Sasha Levin

mac80211: Fix kernel panic due to use of txq after free

2019-05-25T16:26:55+00:00

[ Upstream commit f1267cf3c01b12e0f843fb6a7450a7f0b2efab8a ] The txq of vif is added to active_txqs list for ATF TXQ scheduling in the function ieee80211_queue_skb(), but it was not properly removed before freeing the txq object. It was causing use after free of the txq objects from the active_txqs list, result was kernel panic due to invalid memory access. Fix kernel invalid memory access by properly removing txq object from active_txqs list before free the object. Signed-off-by: Bhagavathi Perumal S Acked-by: Toke Høiland-Jørgensen Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin