kernel/linux.git, branch v4.4.144

Linux 4.4.144

2018-07-25T08:18:33+00:00

ubi: fastmap: Erase outdated anchor PEBs during attach

2018-07-25T08:18:33+00:00

commit f78e5623f45bab2b726eec29dc5cefbbab2d0b1c upstream. The fastmap update code might erase the current fastmap anchor PEB in case it doesn't find any new free PEB. When a power cut happens in this situation we must not have any outdated fastmap anchor PEB on the device, because that would be used to attach during next boot. The easiest way to make that sure is to erase all outdated fastmap anchor PEBs synchronously during attach. Signed-off-by: Sascha Hauer Reviewed-by: Richard Weinberger Fixes: dbb7d2a88d2a ("UBI: Add fastmap core") Cc: Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

ubi: Fix Fastmap's update_vol()

2018-07-25T08:18:33+00:00

commit f7d11b33d4e8cedf19367c09b891bbc705163976 upstream. Usually Fastmap is free to consider every PEB in one of the pools as newer than the existing PEB. Since PEBs in a pool are by definition newer than everything else. But update_vol() missed the case that a pool can contain more than one candidate. Cc: Fixes: dbb7d2a88d ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger Reviewed-by: Boris Brezillon Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

ubi: Fix races around ubi_refill_pools()

2018-07-25T08:18:33+00:00

commit 2e8f08deabbc7eefe4c5838aaa6aa9a23a8acf2e upstream. When writing a new Fastmap the first thing that happens is refilling the pools in memory. At this stage it is possible that new PEBs from the new pools get already claimed and written with data. If this happens before the new Fastmap data structure hits the flash and we face power cut the freshly written PEB will not scanned and unnoticed. Solve the issue by locking the pools until Fastmap is written. Cc: Fixes: dbb7d2a88d ("UBI: Add fastmap core") Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

ubi: Be more paranoid while seaching for the most recent Fastmap

2018-07-25T08:18:32+00:00

commit 74f2c6e9a47cf4e508198c8594626cc82906a13d upstream. Since PEB erasure is asynchornous it can happen that there is more than one Fastmap on the MTD. This is fine because the attach logic will pick the Fastmap data structure with the highest sequence number. On a not so well configured MTD stack spurious ECC errors are common. Causes can be different, bad hardware, wrong operating modes, etc... If the most current Fastmap renders bad due to ECC errors UBI might pick an older Fastmap to attach from. While this can only happen on an anyway broken setup it will show completely different sympthoms and makes finding the root cause much more difficult. So, be debug friendly and fall back to scanning mode of we're facing an ECC error while scanning for Fastmap. Cc: Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

ubi: Rework Fastmap attach base code

2018-07-25T08:18:32+00:00

commit fdf10ed710c0aa177e8dfcd84e65e4e5e8e0956b upstream. Introduce a new list to the UBI attach information object to be able to deal better with old and corrupted Fastmap eraseblocks. Also move more Fastmap specific code into fastmap.c. Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

ubi: Introduce vol_ignored()

2018-07-25T08:18:32+00:00

commit 243a4f8126fcf7facb04b324dbb7c85d10b11ce9 upstream. This makes the logic more easy to follow. Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman

clk: tegra: Fix PLL_U post divider and initial rate on Tegra30

2018-07-25T08:18:32+00:00

commit 797097301860c64b63346d068ba4fe4992bd5021 upstream. The post divider value in the frequency table is wrong as it would lead to the PLL producing an output rate of 960 MHz instead of the desired 480 MHz. This wasn't a problem as nothing used the table to actually initialize the PLL rate, but the bootloader configuration was used unaltered. If the bootloader does not set up the PLL it will fail to come when used under Linux. To fix this don't rely on the bootloader, but set the correct rate in the clock driver. Signed-off-by: Lucas Stach Signed-off-by: Thierry Reding [jonathanh@nvidia.com: Back-ported to stable v4.4.y] Signed-off-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman

block: do not use interruptible wait anywhere

2018-07-25T08:18:32+00:00

commit 1dc3039bc87ae7d19a990c3ee71cfd8a9068f428 upstream. When blk_queue_enter() waits for a queue to unfreeze, or unset the PREEMPT_ONLY flag, do not allow it to be interrupted by a signal. The PREEMPT_ONLY flag was introduced later in commit 3a0a529971ec ("block, scsi: Make SCSI quiesce and resume work reliably"). Note the SCSI device is resumed asynchronously, i.e. after un-freezing userspace tasks. So that commit exposed the bug as a regression in v4.15. A mysterious SIGBUS (or -EIO) sometimes happened during the time the device was being resumed. Most frequently, there was no kernel log message, and we saw Xorg or Xwayland killed by SIGBUS.[1] [1] E.g. https://bugzilla.redhat.com/show_bug.cgi?id=1553979 Without this fix, I get an IO error in this test: # dd if=/dev/sda of=/dev/null iflag=direct & \ while killall -SIGUSR1 dd; do sleep 0.1; done & \ echo mem > /sys/power/state ; \ sleep 5; killall dd # stop after 5 seconds The interruptible wait was added to blk_queue_enter in commit 3ef28e83ab15 ("block: generic request_queue reference counting"). Before then, the interruptible wait was only in blk-mq, but I don't think it could ever have been correct. Reviewed-by: Bart Van Assche Cc: stable@vger.kernel.org Signed-off-by: Alan Jenkins Signed-off-by: Jens Axboe Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

x86/cpu: Re-apply forced caps every time CPU caps are re-read

2018-07-25T08:18:31+00:00

commit 60d3450167433f2d099ce2869dc52dd9e7dc9b29 upstream. Calling get_cpu_cap() will reset a bunch of CPU features. This will cause the system to lose track of force-set and force-cleared features in the words that are reset until the end of CPU initialization. This can cause X86_FEATURE_FPU, for example, to change back and forth during boot and potentially confuse CPU setup. To minimize the chance of confusion, re-apply forced caps every time get_cpu_cap() is called. Signed-off-by: Andy Lutomirski Reviewed-by: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Dave Hansen Cc: Fenghua Yu Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Matthew Whitehead Cc: Oleg Nesterov Cc: One Thousand Gnomes Cc: Peter Zijlstra Cc: Rik van Riel Cc: Thomas Gleixner Cc: Yu-cheng Yu Link: http://lkml.kernel.org/r/c817eb373d2c67c2c81413a70fc9b845fa34a37e.1484705016.git.luto@kernel.org Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman Signed-off-by: Srivatsa S. Bhat Signed-off-by: Greg Kroah-Hartman