kernel/linux.git, branch v4.19.268

Linux 4.19.268

2022-12-08T10:18:35+00:00

Link: https://lore.kernel.org/r/20221205190803.124472741@linuxfoundation.org Tested-by: Shuah Khan Tested-by: Pavel Machek (CIP) Link: https://lore.kernel.org/r/20221206124049.108349681@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Pavel Machek (CIP) Tested-by: Linux Kernel Functional Testing Tested-by: Guenter Roeck Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

ipc/sem: Fix dangling sem_array access in semtimedop race

2022-12-08T10:18:35+00:00

[ Upstream commit b52be557e24c47286738276121177a41f54e3b83 ] When __do_semtimedop() goes to sleep because it has to wait for a semaphore value becoming zero or becoming bigger than some threshold, it links the on-stack sem_queue to the sem_array, then goes to sleep without holding a reference on the sem_array. When __do_semtimedop() comes back out of sleep, one of two things must happen: a) We prove that the on-stack sem_queue has been disconnected from the (possibly freed) sem_array, making it safe to return from the stack frame that the sem_queue exists in. b) We stabilize our reference to the sem_array, lock the sem_array, and detach the sem_queue from the sem_array ourselves. sem_array has RCU lifetime, so for case (b), the reference can be stabilized inside an RCU read-side critical section by locklessly checking whether the sem_queue is still connected to the sem_array. However, the current code does the lockless check on sem_queue before starting an RCU read-side critical section, so the result of the lockless check immediately becomes useless. Fix it by doing rcu_read_lock() before the lockless check. Now RCU ensures that if we observe the object being on our queue, the object can't be freed until rcu_read_unlock(). This bug is only hittable on kernel builds with full preemption support (either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full). Fixes: 370b262c896e ("ipc/sem: avoid idr tree lookup for interrupted semop") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

mmc: sdhci: Fix voltage switch delay

2022-12-08T10:18:34+00:00

commit c981cdfb9925f64a364f13c2b4f98f877308a408 upstream. Commit 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") removed voltage switch delays from sdhci because mmc core had been enhanced to support them. However that assumed that sdhci_set_ios() did a single clock change, which it did not, and so the delays in mmc core, which should have come after the first clock change, were not effective. Fix by avoiding re-configuring UHS and preset settings when the clock is turning on and the settings have not changed. That then also avoids the associated clock changes, so that then sdhci_set_ios() does a single clock change when voltage switching, and the mmc core delays become effective. To do that has meant keeping track of driver strength (host->drv_type), and cases of reinitialization (host->reinit_uhs). Note also, the 'turning_on_clk' restriction should not be necessary but is done to minimize the impact of the change on stable kernels. Fixes: 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

mmc: sdhci: use FIELD_GET for preset value bit masks

2022-12-08T10:18:34+00:00

commit fa0910107a9fea170b817f31da2a65463e00e80e upstream. Use the FIELD_GET macro to get access to the register fields. Delete the shift macros. Signed-off-by: Masahiro Yamada Link: https://lore.kernel.org/r/20200312110050.21732-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson Signed-off-by: Greg Kroah-Hartman

x86/ioremap: Fix page aligned size calculation in __ioremap_caller()

2022-12-08T10:18:34+00:00

[ Upstream commit 4dbd6a3e90e03130973688fd79e19425f720d999 ] Current code re-calculates the size after aligning the starting and ending physical addresses on a page boundary. But the re-calculation also embeds the masking of high order bits that exceed the size of the physical address space (via PHYSICAL_PAGE_MASK). If the masking removes any high order bits, the size calculation results in a huge value that is likely to immediately fail. Fix this by re-calculating the page-aligned size first. Then mask any high order bits using PHYSICAL_PAGE_MASK. Fixes: ffa71f33a820 ("x86, ioremap: Fix incorrect physical address handling in PAE mode") Signed-off-by: Michael Kelley Signed-off-by: Borislav Petkov Acked-by: Dave Hansen Cc: Link: https://lore.kernel.org/r/1668624097-14884-2-git-send-email-mikelley@microsoft.com Signed-off-by: Sasha Levin

Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM

2022-12-08T10:18:34+00:00

commit 711f8c3fb3db61897080468586b970c87c61d9e4 upstream. The Bluetooth spec states that the valid range for SPSM is from 0x0001-0x00ff so it is invalid to accept values outside of this range: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A page 1059: Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges CVE: CVE-2022-42896 CC: stable@vger.kernel.org Reported-by: Tamás Koczka Signed-off-by: Luiz Augusto von Dentz Reviewed-by: Tedd Ho-Jeong An Signed-off-by: Greg Kroah-Hartman

x86/pm: Add enumeration check before spec MSRs save/restore setup

2022-12-08T10:18:34+00:00

commit 50bcceb7724e471d9b591803889df45dcbb584bc upstream. pm_save_spec_msr() keeps a list of all the MSRs which _might_ need to be saved and restored at hibernate and resume. However, it has zero awareness of CPU support for these MSRs. It mostly works by unconditionally attempting to manipulate these MSRs and relying on rdmsrl_safe() being able to handle a #GP on CPUs where the support is unavailable. However, it's possible for reads (RDMSR) to be supported for a given MSR while writes (WRMSR) are not. In this case, msr_build_context() sees a successful read (RDMSR) and marks the MSR as valid. Then, later, a write (WRMSR) fails, producing a nasty (but harmless) error message. This causes restore_processor_state() to try and restore it, but writing this MSR is not allowed on the Intel Atom N2600 leading to: unchecked MSR access error: WRMSR to 0x122 (tried to write 0x0000000000000002) \ at rIP: 0xffffffff8b07a574 (native_write_msr+0x4/0x20) Call Trace: restore_processor_state x86_acpi_suspend_lowlevel acpi_suspend_enter suspend_devices_and_enter pm_suspend.cold state_store kernfs_fop_write_iter vfs_write ksys_write do_syscall_64 ? do_syscall_64 ? up_read ? lock_is_held_type ? asm_exc_page_fault ? lockdep_hardirqs_on entry_SYSCALL_64_after_hwframe To fix this, add the corresponding X86_FEATURE bit for each MSR. Avoid trying to manipulate the MSR when the feature bit is clear. This required adding a X86_FEATURE bit for MSRs that do not have one already, but it's a small price to pay. [ bp: Move struct msr_enumeration inside the only function that uses it. ] [Pawan: Resolve build issue in backport] Fixes: 73924ec4d560 ("x86/pm: Save the MSR validity status at context setup") Reported-by: Hans de Goede Signed-off-by: Pawan Gupta Signed-off-by: Borislav Petkov Reviewed-by: Dave Hansen Acked-by: Rafael J. Wysocki Cc: Link: https://lore.kernel.org/r/c24db75d69df6e66c0465e13676ad3f2837a2ed8.1668539735.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman

x86/tsx: Add a feature bit for TSX control MSR support

2022-12-08T10:18:34+00:00

commit aaa65d17eec372c6a9756833f3964ba05b05ea14 upstream. Support for the TSX control MSR is enumerated in MSR_IA32_ARCH_CAPABILITIES. This is different from how other CPU features are enumerated i.e. via CPUID. Currently, a call to tsx_ctrl_is_supported() is required for enumerating the feature. In the absence of a feature bit for TSX control, any code that relies on checking feature bits directly will not work. In preparation for adding a feature bit check in MSR save/restore during suspend/resume, set a new feature bit X86_FEATURE_TSX_CTRL when MSR_IA32_TSX_CTRL is present. [ bp: Remove tsx_ctrl_is_supported()] [Pawan: Resolved conflicts in backport; Removed parts of commit message referring to removed function tsx_ctrl_is_supported()] Suggested-by: Andrew Cooper Signed-off-by: Pawan Gupta Signed-off-by: Borislav Petkov Reviewed-by: Dave Hansen Cc: Link: https://lore.kernel.org/r/de619764e1d98afbb7a5fa58424f1278ede37b45.1668539735.git.pawan.kumar.gupta@linux.intel.com Signed-off-by: Greg Kroah-Hartman

nvme: restrict management ioctls to admin

2022-12-08T10:18:34+00:00

commit 23e085b2dead13b51fe86d27069895b740f749c0 upstream. The passthrough commands already have this restriction, but the other operations do not. Require the same capabilities for all users as all of these operations, which include resets and rescans, can be disruptive. Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman Signed-off-by: Ovidiu Panait

tcp/udp: Fix memory leak in ipv6_renew_options().

2022-12-08T10:18:34+00:00

commit 3c52c6bb831f6335c176a0fc7214e26f43adbd11 upstream. syzbot reported a memory leak [0] related to IPV6_ADDRFORM. The scenario is that while one thread is converting an IPv6 socket into IPv4 with IPV6_ADDRFORM, another thread calls do_ipv6_setsockopt() and allocates memory to inet6_sk(sk)->XXX after conversion. Then, the converted sk with (tcp|udp)_prot never frees the IPv6 resources, which inet6_destroy_sock() should have cleaned up. setsockopt(IPV6_ADDRFORM) setsockopt(IPV6_DSTOPTS) +-----------------------+ +----------------------+ - do_ipv6_setsockopt(sk, ...) - sockopt_lock_sock(sk) - do_ipv6_setsockopt(sk, ...) - lock_sock(sk) ^._ called via tcpv6_prot - WRITE_ONCE(sk->sk_prot, &tcp_prot) before WRITE_ONCE() - xchg(&np->opt, NULL) - txopt_put(opt) - sockopt_release_sock(sk) - release_sock(sk) - sockopt_lock_sock(sk) - lock_sock(sk) - ipv6_set_opt_hdr(sk, ...) - ipv6_update_options(sk, opt) - xchg(&inet6_sk(sk)->opt, opt) ^._ opt is never freed. - sockopt_release_sock(sk) - release_sock(sk) Since IPV6_DSTOPTS allocates options under lock_sock(), we can avoid this memory leak by testing whether sk_family is changed by IPV6_ADDRFORM after acquiring the lock. This issue exists from the initial commit between IPV6_ADDRFORM and IPV6_PKTOPTIONS. [0]: BUG: memory leak unreferenced object 0xffff888009ab9f80 (size 96): comm "syz-executor583", pid 328, jiffies 4294916198 (age 13.034s) hex dump (first 32 bytes): 01 00 00 00 48 00 00 00 08 00 00 00 00 00 00 00 ....H........... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002ee98ae1>] kmalloc include/linux/slab.h:605 [inline] [<000000002ee98ae1>] sock_kmalloc+0xb3/0x100 net/core/sock.c:2566 [<0000000065d7b698>] ipv6_renew_options+0x21e/0x10b0 net/ipv6/exthdrs.c:1318 [<00000000a8c756d7>] ipv6_set_opt_hdr net/ipv6/ipv6_sockglue.c:354 [inline] [<00000000a8c756d7>] do_ipv6_setsockopt.constprop.0+0x28b7/0x4350 net/ipv6/ipv6_sockglue.c:668 [<000000002854d204>] ipv6_setsockopt+0xdf/0x190 net/ipv6/ipv6_sockglue.c:1021 [<00000000e69fdcf8>] tcp_setsockopt+0x13b/0x2620 net/ipv4/tcp.c:3789 [<0000000090da4b9b>] __sys_setsockopt+0x239/0x620 net/socket.c:2252 [<00000000b10d192f>] __do_sys_setsockopt net/socket.c:2263 [inline] [<00000000b10d192f>] __se_sys_setsockopt net/socket.c:2260 [inline] [<00000000b10d192f>] __x64_sys_setsockopt+0xbe/0x160 net/socket.c:2260 [<000000000a80d7aa>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<000000000a80d7aa>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<000000004562b5c6>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Kuniyuki Iwashima Signed-off-by: Jakub Kicinski Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman