kernel/linux.git, branch v4.19.194

Linux 4.19.194

2021-06-10T11:24:09+00:00

Link: https://lore.kernel.org/r/20210608175932.263480586@linuxfoundation.org Tested-by: Shuah Khan Link: https://lore.kernel.org/r/20210609062858.532803536@linuxfoundation.org Tested-by: Jon Hunter Tested-by: Linux Kernel Functional Testing Tested-by: Jason Self Tested-by: Guenter Roeck Tested-by: Pavel Machek (CIP) Tested-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

xen-pciback: redo VF placement in the virtual topology

2021-06-10T11:24:09+00:00

The commit referenced below was incomplete: It merely affected what would get written to the vdev- xenstore node. The guest would still find the function at the original function number as long as __xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt __xen_pcibk_get_pcifront_dev(). Undo overriding the function to zero and instead make sure that VFs at function zero remain alone in their slot. This has the added benefit of improving overall capacity, considering that there's only a total of 32 slots available right now (PCI segment and bus can both only ever be zero at present). This is upstream commit 4ba50e7c423c29639878c00573288869aa627068. Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots") Signed-off-by: Jan Beulich Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

sched/fair: Optimize select_idle_cpu

2021-06-10T11:24:09+00:00

commit 60588bfa223ff675b95f866249f90616613fbe31 upstream. select_idle_cpu() will scan the LLC domain for idle CPUs, it's always expensive. so the next commit : 1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()") introduces a way to limit how many CPUs we scan. But it consume some CPUs out of 'nr' that are not allowed for the task and thus waste our attempts. The function always return nr_cpumask_bits, and we can't find a CPU which our task is allowed to run. Cpumask may be too big, similar to select_idle_core(), use per_cpu_ptr 'select_idle_mask' to prevent stack overflow. Fixes: 1ad3aaf3fcd2 ("sched/core: Implement new approach to scale select_idle_cpu()") Signed-off-by: Cheng Jian Signed-off-by: Peter Zijlstra (Intel) Reviewed-by: Srikar Dronamraju Reviewed-by: Vincent Guittot Reviewed-by: Valentin Schneider Link: https://lkml.kernel.org/r/20191213024530.28052-1-cj.chengjian@huawei.com Signed-off-by: Yang Wei Tested-by: Yang Wei Signed-off-by: Greg Kroah-Hartman

ACPI: EC: Look for ECDT EC after calling acpi_load_tables()

2021-06-10T11:24:09+00:00

commit b1c0330823fe842dbb34641f1410f0afa51c29d3 upstream. Some systems have had functional issues since commit 5a8361f7ecce (ACPICA: Integrate package handling with module-level code) that, among other things, changed the initial values of the acpi_gbl_group_module_level_code and acpi_gbl_parse_table_as_term_list global flags in ACPICA which implicitly caused acpi_ec_ecdt_probe() to be called before acpi_load_tables() on the vast majority of platforms. Namely, before commit 5a8361f7ecce, acpi_load_tables() was called from acpi_early_init() if acpi_gbl_parse_table_as_term_list was FALSE and acpi_gbl_group_module_level_code was TRUE, which almost always was the case as FALSE and TRUE were their initial values, respectively. The acpi_gbl_parse_table_as_term_list value would be changed to TRUE for a couple of platforms in acpi_quirks_dmi_table[], but it remained FALSE in the vast majority of cases. After commit 5a8361f7ecce, the initial values of the two flags have been reversed, so in effect acpi_load_tables() has not been called from acpi_early_init() any more. That, in turn, affects acpi_ec_ecdt_probe() which is invoked before acpi_load_tables() now and it is not possible to evaluate the _REG method for the EC address space handler installed by it. That effectively causes the EC address space to be inaccessible to AML on platforms with an ECDT matching the EC device definition in the DSDT and functional problems ensue in there. Because the default behavior before commit 5a8361f7ecce was to call acpi_ec_ecdt_probe() after acpi_load_tables(), it should be safe to do that again. Moreover, the EC address space handler installed by acpi_ec_ecdt_probe() is only needed for AML to be able to access the EC address space and the only AML that can run during acpi_load_tables() is module-level code which only is allowed to access address spaces with default handlers (memory, I/O and PCI config space). For this reason, move the acpi_ec_ecdt_probe() invocation back to acpi_bus_init(), from where it was taken away by commit d737f333b211 (ACPI: probe ECDT before loading AML tables regardless of module-level code flag), and put it after the invocation of acpi_load_tables() to restore the original code ordering from before commit 5a8361f7ecce. Fixes: 5a8361f7ecce ("ACPICA: Integrate package handling with module-level code") Link: https://bugzilla.kernel.org/show_bug.cgi?id=199981 Reported-by: step-ali Reported-by: Charles Stanhope Tested-by: Charles Stanhope Reported-by: Paulo Nascimento Reported-by: David Purton Reported-by: Adam Harvey Reported-by: Zhang Rui Tested-by: Zhang Rui Tested-by: Jean-Marc Lenoir Signed-off-by: Rafael J. Wysocki Cc: Laurențiu Păncescu Cc: Salvatore Bonaccorso Signed-off-by: Greg Kroah-Hartman

ACPI: probe ECDT before loading AML tables regardless of module-level code flag

2021-06-10T11:24:09+00:00

commit d737f333b211361b6e239fc753b84c3be2634aaa upstream. It was discovered that AML tables were loaded before or after the ECDT depending on acpi_gbl_execute_tables_as_methods. According to the ACPI spec, the ECDT should be loaded before the namespace is populated by loading AML tables (DSDT and SSDT). Since the ECDT should be loaded early in the boot process, this change moves the ECDT probing to acpi_early_init. Signed-off-by: Erik Schmauss Signed-off-by: Rafael J. Wysocki Cc: Laurențiu Păncescu Cc: Salvatore Bonaccorso Signed-off-by: Greg Kroah-Hartman

KVM: arm64: Fix debug register indexing

2021-06-10T11:24:09+00:00

commit cb853ded1d25e5b026ce115dbcde69e3d7e2e831 upstream. Commit 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on reset") flipped the register number to 0 for all the debug registers in the sysreg table, hereby indicating that these registers live in a separate shadow structure. However, the author of this patch failed to realise that all the accessors are using that particular index instead of the register encoding, resulting in all the registers hitting index 0. Not quite a valid implementation of the architecture... Address the issue by fixing all the accessors to use the CRm field of the encoding, which contains the debug register index. Fixes: 03fdfb2690099 ("KVM: arm64: Don't write junk to sysregs on reset") Reported-by: Ricardo Koller Signed-off-by: Marc Zyngier Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

KVM: SVM: Truncate GPR value for DR and CR accesses in !64-bit mode

2021-06-10T11:24:08+00:00

commit 0884335a2e653b8a045083aa1d57ce74269ac81d upstream. Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not in 64-bit mode. The APM states bits 63:32 are dropped for both DRs and CRs: In 64-bit mode, the operand size is fixed at 64 bits without the need for a REX prefix. In non-64-bit mode, the operand size is fixed at 32 bits and the upper 32 bits of the destination are forced to 0. Fixes: 7ff76d58a9dc ("KVM: SVM: enhance MOV CR intercept handler") Fixes: cae3797a4639 ("KVM: SVM: enhance mov DR intercept handler") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson Message-Id: <20210422022128.3464144-4-seanjc@google.com> Signed-off-by: Paolo Bonzini [sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

btrfs: fix unmountable seed device after fstrim

2021-06-10T11:24:08+00:00

commit 5e753a817b2d5991dfe8a801b7b1e8e79a1c5a20 upstream. The following test case reproduces an issue of wrongly freeing in-use blocks on the readonly seed device when fstrim is called on the rw sprout device. As shown below. Create a seed device and add a sprout device to it: $ mkfs.btrfs -fq -dsingle -msingle /dev/loop0 $ btrfstune -S 1 /dev/loop0 $ mount /dev/loop0 /btrfs $ btrfs dev add -f /dev/loop1 /btrfs BTRFS info (device loop0): relocating block group 290455552 flags system BTRFS info (device loop0): relocating block group 1048576 flags system BTRFS info (device loop0): disk added /dev/loop1 $ umount /btrfs Mount the sprout device and run fstrim: $ mount /dev/loop1 /btrfs $ fstrim /btrfs $ umount /btrfs Now try to mount the seed device, and it fails: $ mount /dev/loop0 /btrfs mount: /btrfs: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error. Block 5292032 is missing on the readonly seed device: $ dmesg -kt | tail BTRFS error (device loop0): bad tree block start, want 5292032 have 0 BTRFS warning (device loop0): couldn't read-tree root BTRFS error (device loop0): open_ctree failed >From the dump-tree of the seed device (taken before the fstrim). Block 5292032 belonged to the block group starting at 5242880: $ btrfs inspect dump-tree -e /dev/loop0 | grep -A1 BLOCK_GROUP item 3 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16169 itemsize 24 block group used 114688 chunk_objectid 256 flags METADATA >From the dump-tree of the sprout device (taken before the fstrim). fstrim used block-group 5242880 to find the related free space to free: $ btrfs inspect dump-tree -e /dev/loop1 | grep -A1 BLOCK_GROUP item 1 key (5242880 BLOCK_GROUP_ITEM 8388608) itemoff 16226 itemsize 24 block group used 32768 chunk_objectid 256 flags METADATA BPF kernel tracing the fstrim command finds the missing block 5292032 within the range of the discarded blocks as below: kprobe:btrfs_discard_extent { printf("freeing start %llu end %llu num_bytes %llu:\n", arg1, arg1+arg2, arg2); } freeing start 5259264 end 5406720 num_bytes 147456 Fix this by avoiding the discard command to the readonly seed device. Reported-by: Chris Murphy CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana Signed-off-by: Anand Jain Signed-off-by: David Sterba Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

perf/core: Fix corner case in perf_rotate_context()

2021-06-10T11:24:08+00:00

commit 7fa343b7fdc4f351de4e3f28d5c285937dd1f42f upstream. In perf_rotate_context(), when the first cpu flexible event fail to schedule, cpu_rotate is 1, while cpu_event is NULL. Since cpu_event is NULL, perf_rotate_context will _NOT_ call cpu_ctx_sched_out(), thus cpuctx->ctx.is_active will have EVENT_FLEXIBLE set. Then, the next perf_event_sched_in() will skip all cpu flexible events because of the EVENT_FLEXIBLE bit. In the next call of perf_rotate_context(), cpu_rotate stays 1, and cpu_event stays NULL, so this process repeats. The end result is, flexible events on this cpu will not be scheduled (until another event being added to the cpuctx). Here is an easy repro of this issue. On Intel CPUs, where ref-cycles could only use one counter, run one pinned event for ref-cycles, one flexible event for ref-cycles, and one flexible event for cycles. The flexible ref-cycles is never scheduled, which is expected. However, because of this issue, the cycles event is never scheduled either. $ perf stat -e ref-cycles:D,ref-cycles,cycles -C 5 -I 1000 time counts unit events 1.000152973 15,412,480 ref-cycles:D 1.000152973 ref-cycles (0.00%) 1.000152973 cycles (0.00%) 2.000486957 18,263,120 ref-cycles:D 2.000486957 ref-cycles (0.00%) 2.000486957 cycles (0.00%) To fix this, when the flexible_active list is empty, try rotate the first event in the flexible_groups. Also, rename ctx_first_active() to ctx_event_to_rotate(), which is more accurate. Signed-off-by: Song Liu Signed-off-by: Peter Zijlstra (Intel) Cc: Cc: Arnaldo Carvalho de Melo Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Sasha Levin Cc: Thomas Gleixner Fixes: 8d5bce0c37fa ("perf/core: Optimize perf_rotate_context() event scheduling") Link: https://lkml.kernel.org/r/20191008165949.920548-1-songliubraving@fb.com Signed-off-by: Ingo Molnar Signed-off-by: Wen Yang Signed-off-by: Greg Kroah-Hartman

perf/cgroups: Don't rotate events for cgroups unnecessarily

2021-06-10T11:24:08+00:00

commit fd7d55172d1e2e501e6da0a5c1de25f06612dc2e upstream. Currently perf_rotate_context assumes that if the context's nr_events != nr_active a rotation is necessary for perf event multiplexing. With cgroups, nr_events is the total count of events for all cgroups and nr_active will not include events in a cgroup other than the current task's. This makes rotation appear necessary for cgroups when it is not. Add a perf_event_context flag that is set when rotation is necessary. Clear the flag during sched_out and set it when a flexible sched_in fails due to resources. Signed-off-by: Ian Rogers Signed-off-by: Peter Zijlstra (Intel) Cc: Alexander Shishkin Cc: Arnaldo Carvalho de Melo Cc: Arnaldo Carvalho de Melo Cc: Borislav Petkov Cc: Jiri Olsa Cc: Kan Liang Cc: Linus Torvalds Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Thomas Gleixner Cc: Vince Weaver Link: https://lkml.kernel.org/r/20190601082722.44543-1-irogers@google.com Signed-off-by: Ingo Molnar Signed-off-by: Wen Yang Signed-off-by: Greg Kroah-Hartman