kernel/linux.git, branch v4.19.193

Linux 4.19.193

2021-06-03T06:38:13+00:00

Link: https://lore.kernel.org/r/20210531130640.131924542@linuxfoundation.org Tested-by: Jason Self Tested-by: Hulk Robot Tested-by: Pavel Machek (CIP) Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

usb: core: reduce power-on-good delay time of root hub

2021-06-03T06:38:12+00:00

commit 90d28fb53d4a51299ff324dede015d5cb11b88a2 upstream. Return the exactly delay time given by root hub descriptor, this helps to reduce resume time etc. Due to the root hub descriptor is usually provided by the host controller driver, if there is compatibility for a root hub, we can fix it easily without affect other root hub Acked-by: Alan Stern Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/1618017645-12259-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman

net: hns3: check the return of skb_checksum_help()

2021-06-03T06:38:12+00:00

commit 9bb5a495424fd4bfa672eb1f31481248562fa156 upstream. Currently skb_checksum_help()'s return is ignored, but it may return error when it fails to allocate memory when linearizing. So adds checking for the return of skb_checksum_help(). Fixes: 76ad4f0ee747("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by: Yunsheng Lin Signed-off-by: Huazhong Tan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

drivers/net/ethernet: clean up unused assignments

2021-06-03T06:38:12+00:00

commit 7c8c0291f84027558bd5fca5729cbcf288c510f4 upstream. As part of the W=1 compliation series, these lines all created warnings about unused variables that were assigned a value. Most of them are from register reads, but some are just picking up a return value from a function and never doing anything with it. Fixed warnings: .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/brocade/bna/bnad.c:3280:6: warning: variable ‘rx_count’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:512:6: warning: variable ‘val’ set but not used [-Wunused-but-set-variable] .../ethernet/cortina/gemini.c:2110:21: warning: variable ‘config0’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1327:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/cavium/liquidio/octeon_device.c:1358:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/media.c:322:8: warning: variable ‘setup’ set but not used [-Wunused-but-set-variable] .../ethernet/dec/tulip/de4x5.c:4928:13: warning: variable ‘r3’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:1652:7: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:4981:6: warning: variable ‘rx_status’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6510:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/micrel/ksz884x.c:6087: warning: cannot understand function prototype: 'struct hw_regs ' .../ethernet/microchip/lan743x_main.c:161:6: warning: variable ‘int_en’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:1702:6: warning: variable ‘int_sts’ set but not used [-Wunused-but-set-variable] .../ethernet/microchip/lan743x_main.c:3041:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:603:6: warning: variable ‘tbisr’ set but not used [-Wunused-but-set-variable] .../ethernet/natsemi/ns83820.c:1207:11: warning: variable ‘tanar’ set but not used [-Wunused-but-set-variable] .../ethernet/marvell/mvneta.c:754:6: warning: variable ‘dummy’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:33:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:160:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:490:6: warning: variable ‘val32’ set but not used [-Wunused-but-set-variable] .../ethernet/neterion/vxge/vxge-traffic.c:2378:6: warning: variable ‘val64’ set but not used [-Wunused-but-set-variable] .../ethernet/packetengines/yellowfin.c:1063:18: warning: variable ‘yf_size’ set but not used [-Wunused-but-set-variable] .../ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/mellanox/mlx4/en_tx.c:858:6: warning: variable ‘ring_cons’ set but not used [-Wunused-but-set-variable] .../ethernet/sis/sis900.c:792:6: warning: variable ‘status’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:878:11: warning: variable ‘rx_ev_pkt_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:23: warning: variable ‘rx_ev_mcast_pkt’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:877:7: warning: variable ‘rx_ev_hdr_type’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:876:7: warning: variable ‘rx_ev_other_err’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:1646:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] .../ethernet/sfc/falcon/farch.c:2535:32: warning: variable ‘spec’ set but not used [-Wunused-but-set-variable] .../ethernet/via/via-velocity.c:880:6: warning: variable ‘curr_status’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/tlan.c:656:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/davinci_emac.c:1230:6: warning: variable ‘num_tx_pkts’ set but not used [-Wunused-but-set-variable] .../ethernet/synopsys/dwc-xlgmac-common.c:516:8: warning: variable ‘str’ set but not used [-Wunused-but-set-variable] .../ethernet/ti/cpsw_new.c:1662:22: warning: variable ‘priv’ set but not used [-Wunused-but-set-variable] The register reads should be OK, because the current implementation of readl and friends will always execute even without an lvalue. When it makes sense, just remove the lvalue assignment and the local. Other times, just remove the offending code, and occasionally, just mark the variable as maybe unused since it could be used in an ifdef or debug scenario. Only compile tested with W=1. Signed-off-by: Jesse Brandeburg Acked-by: Edward Cree Signed-off-by: David S. Miller [fixes gcc-11 build warnings - gregkh] Signed-off-by: Greg Kroah-Hartman

hugetlbfs: hugetlb_fault_mutex_hash() cleanup

2021-06-03T06:38:12+00:00

commit 552546366a30d88bd1d6f5efe848b2ab50fd57e5 upstream. A new clang diagnostic (-Wsizeof-array-div) warns about the calculation to determine the number of u32's in an array of unsigned longs. Suppress warning by adding parentheses. While looking at the above issue, noticed that the 'address' parameter to hugetlb_fault_mutex_hash is no longer used. So, remove it from the definition and all callers. No functional change. Link: http://lkml.kernel.org/r/20190919011847.18400-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz Reported-by: Nathan Chancellor Reviewed-by: Nathan Chancellor Reviewed-by: Davidlohr Bueso Reviewed-by: Andrew Morton Cc: Nick Desaulniers Cc: Ilie Halip Cc: David Bolvansky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c

2021-06-03T06:38:12+00:00

[ Upstream commit fef532ea0cd871afab7d9a7b6e9da99ac2c24371 ] rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However, when this watchdog driver is built as a loadable module, there is a build error since the rt_sysc_membase symbol is not exported. Export it to quell the build error. ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined! Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver") Signed-off-by: Randy Dunlap Cc: Guenter Roeck Cc: Wim Van Sebroeck Cc: John Crispin Cc: linux-mips@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Acked-by: Guenter Roeck Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: alchemy: xxs1500: add gpio-au1000.h header file

2021-06-03T06:38:12+00:00

[ Upstream commit ff4cff962a7eedc73e54b5096693da7f86c61346 ] board-xxs1500.c references 2 functions without declaring them, so add the header file to placate the build. ../arch/mips/alchemy/board-xxs1500.c: In function 'board_setup': ../arch/mips/alchemy/board-xxs1500.c:56:2: error: implicit declaration of function 'alchemy_gpio1_input_enable' [-Werror=implicit-function-declaration] 56 | alchemy_gpio1_input_enable(); ../arch/mips/alchemy/board-xxs1500.c:57:2: error: implicit declaration of function 'alchemy_gpio2_enable'; did you mean 'alchemy_uart_enable'? [-Werror=implicit-function-declaration] 57 | alchemy_gpio2_enable(); Fixes: 8e026910fcd4 ("MIPS: Alchemy: merge GPR/MTX-1/XXS1500 board code into single files") Signed-off-by: Randy Dunlap Cc: Thomas Bogendoerfer Cc: linux-mips@vger.kernel.org Cc: Manuel Lauss Cc: Ralf Baechle Acked-by: Manuel Lauss Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

sch_dsmark: fix a NULL deref in qdisc_reset()

2021-06-03T06:38:12+00:00

[ Upstream commit 9b76eade16423ef06829cccfe3e100cfce31afcd ] If Qdisc_ops->init() is failed, Qdisc_ops->reset() would be called. When dsmark_init(Qdisc_ops->init()) is failed, it possibly doesn't initialize dsmark_qdisc_data->q. But dsmark_reset(Qdisc_ops->reset()) uses dsmark_qdisc_data->q pointer wihtout any null checking. So, panic would occur. Test commands: sysctl net.core.default_qdisc=dsmark -w ip link add dummy0 type dummy ip link add vw0 link dummy0 type virt_wifi ip link set vw0 up Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] CPU: 3 PID: 684 Comm: ip Not tainted 5.12.0+ #910 RIP: 0010:qdisc_reset+0x2b/0x680 Code: 1f 44 00 00 48 b8 00 00 00 00 00 fc ff df 41 57 41 56 41 55 41 54 55 48 89 fd 48 83 c7 18 53 48 89 fa 48 c1 ea 03 48 83 ec 20 <80> 3c 02 00 0f 85 09 06 00 00 4c 8b 65 18 0f 1f 44 00 00 65 8b 1d RSP: 0018:ffff88800fda6bf8 EFLAGS: 00010282 RAX: dffffc0000000000 RBX: ffff8880050ed800 RCX: 0000000000000000 RDX: 0000000000000003 RSI: ffffffff99e34100 RDI: 0000000000000018 RBP: 0000000000000000 R08: fffffbfff346b553 R09: fffffbfff346b553 R10: 0000000000000001 R11: fffffbfff346b552 R12: ffffffffc0824940 R13: ffff888109e83800 R14: 00000000ffffffff R15: ffffffffc08249e0 FS: 00007f5042287680(0000) GS:ffff888119800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055ae1f4dbd90 CR3: 0000000006760002 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? rcu_read_lock_bh_held+0xa0/0xa0 dsmark_reset+0x3d/0xf0 [sch_dsmark] qdisc_reset+0xa9/0x680 qdisc_destroy+0x84/0x370 qdisc_create_dflt+0x1fe/0x380 attach_one_default_qdisc.constprop.41+0xa4/0x180 dev_activate+0x4d5/0x8c0 ? __dev_open+0x268/0x390 __dev_open+0x270/0x390 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Taehee Yoo Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

ipv6: record frag_max_size in atomic fragments in input path

2021-06-03T06:38:12+00:00

[ Upstream commit e29f011e8fc04b2cdc742a2b9bbfa1b62518381a ] Commit dbd1759e6a9c ("ipv6: on reassembly, record frag_max_size") filled the frag_max_size field in IP6CB in the input path. The field should also be filled in case of atomic fragments. Fixes: dbd1759e6a9c ('ipv6: on reassembly, record frag_max_size') Signed-off-by: Francesco Ruggeri Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

scsi: libsas: Use _safe() loop in sas_resume_port()

2021-06-03T06:38:12+00:00

[ Upstream commit 8c7e7b8486cda21269d393245883c5e4737d5ee7 ] If sas_notify_lldd_dev_found() fails then this code calls: sas_unregister_dev(port, dev); which removes "dev", our list iterator, from the list. This could lead to an endless loop. We need to use list_for_each_entry_safe(). Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda Fixes: 303694eeee5e ("[SCSI] libsas: suspend / resume support") Reviewed-by: John Garry Signed-off-by: Dan Carpenter Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin