kernel/linux.git, branch v4.19.109

Linux 4.19.109

2020-03-11T13:15:13+00:00

scsi: pm80xx: Fixed kernel panic during error recovery for SATA drive

2020-03-11T13:15:13+00:00

commit 196ba6629cf95e51403337235d09742fcdc3febd upstream. Disabling the SATA drive interface cause kernel panic. When the drive Interface is disabled, device should be deregistered after aborting all pending I/Os. Also changed the port recovery timeout to 10000 ms for PM8006 controller. Signed-off-by: Deepak Ukey Signed-off-by: Viswas G Reviewed-by: Jack Wang Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

dm integrity: fix a deadlock due to offloading to an incorrect workqueue

2020-03-11T13:15:13+00:00

commit 53770f0ec5fd417429775ba006bc4abe14002335 upstream. If we need to perform synchronous I/O in dm_integrity_map_continue(), we must make sure that we are not in the map function - in order to avoid the deadlock due to bio queuing in generic_make_request. To avoid the deadlock, we offload the request to metadata_wq. However, metadata_wq also processes metadata updates for write requests. If there are too many requests that get offloaded to metadata_wq at the beginning of dm_integrity_map_continue, the workqueue metadata_wq becomes clogged and the system is incapable of processing any metadata updates. This causes a deadlock because all the requests that need to do metadata updates wait for metadata_wq to proceed and metadata_wq waits inside wait_and_add_new_range until some existing request releases its range lock (which doesn't happen because the range lock is released after metadata update). In order to fix the deadlock, we create a new workqueue offload_wq and offload requests to it - so that processing of offload_wq is independent from processing of metadata_wq. Fixes: 7eada909bfd7 ("dm: add integrity target") Cc: stable@vger.kernel.org # v4.12+ Reported-by: Heinz Mauelshagen Tested-by: Heinz Mauelshagen Signed-off-by: Heinz Mauelshagen Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

efi/x86: Handle by-ref arguments covering multiple pages in mixed mode

2020-03-11T13:15:12+00:00

commit 8319e9d5ad98ffccd19f35664382c73cea216193 upstream. The mixed mode runtime wrappers are fragile when it comes to how the memory referred to by its pointer arguments are laid out in memory, due to the fact that it translates these addresses to physical addresses that the runtime services can dereference when running in 1:1 mode. Since vmalloc'ed pages (including the vmap'ed stack) are not contiguous in the physical address space, this scheme only works if the referenced memory objects do not cross page boundaries. Currently, the mixed mode runtime service wrappers require that all by-ref arguments that live in the vmalloc space have a size that is a power of 2, and are aligned to that same value. While this is a sensible way to construct an object that is guaranteed not to cross a page boundary, it is overly strict when it comes to checking whether a given object violates this requirement, as we can simply take the physical address of the first and the last byte, and verify that they point into the same physical page. When this check fails, we emit a WARN(), but then simply proceed with the call, which could cause data corruption if the next physical page belongs to a mapping that is entirely unrelated. Given that with vmap'ed stacks, this condition is much more likely to trigger, let's relax the condition a bit, but fail the runtime service call if it does trigger. Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y") Signed-off-by: Ard Biesheuvel Signed-off-by: Ingo Molnar Cc: linux-efi@vger.kernel.org Cc: Ingo Molnar Cc: Thomas Gleixner Link: https://lore.kernel.org/r/20200221084849.26878-4-ardb@kernel.org Signed-off-by: Greg Kroah-Hartman

efi/x86: Align GUIDs to their size in the mixed mode runtime wrapper

2020-03-11T13:15:12+00:00

commit 63056e8b5ebf41d52170e9f5ba1fc83d1855278c upstream. Hans reports that his mixed mode systems running v5.6-rc1 kernels hit the WARN_ON() in virt_to_phys_or_null_size(), caused by the fact that efi_guid_t objects on the vmap'ed stack happen to be misaligned with respect to their sizes. As a quick (i.e., backportable) fix, copy GUID pointer arguments to the local stack into a buffer that is naturally aligned to its size, so that it is guaranteed to cover only one physical page. Note that on x86, we cannot rely on the stack pointer being aligned the way the compiler expects, so we need to allocate an 8-byte aligned buffer of sufficient size, and copy the GUID into that buffer at an offset that is aligned to 16 bytes. Fixes: f6697df36bdf0bf7 ("x86/efi: Prevent mixed mode boot corruption with CONFIG_VMAP_STACK=y") Reported-by: Hans de Goede Signed-off-by: Ard Biesheuvel Signed-off-by: Ingo Molnar Tested-by: Hans de Goede Cc: linux-efi@vger.kernel.org Cc: Ingo Molnar Cc: Thomas Gleixner Link: https://lore.kernel.org/r/20200221084849.26878-2-ardb@kernel.org Signed-off-by: Greg Kroah-Hartman

powerpc: fix hardware PMU exception bug on PowerVM compatibility mode systems

2020-03-11T13:15:12+00:00

commit fc37a1632d40c80c067eb1bc235139f5867a2667 upstream. PowerVM systems running compatibility mode on a few Power8 revisions are still vulnerable to the hardware defect that loses PMU exceptions arriving prior to a context switch. The software fix for this issue is enabled through the CPU_FTR_PMAO_BUG cpu_feature bit, nevertheless this bit also needs to be set for PowerVM compatibility mode systems. Fixes: 68f2f0d431d9ea4 ("powerpc: Add a cpu feature CPU_FTR_PMAO_BUG") Signed-off-by: Desnes A. Nunes do Rosario Reviewed-by: Leonardo Bras Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200227134715.9715-1-desnesn@linux.ibm.com Signed-off-by: Greg Kroah-Hartman

dmaengine: coh901318: Fix a double lock bug in dma_tc_handle()

2020-03-11T13:15:12+00:00

commit 36d5d22090d13fd3a7a8c9663a711cbe6970aac8 upstream. The caller is already holding the lock so this will deadlock. Fixes: 0b58828c923e ("DMAENGINE: COH 901 318 remove irq counting") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/20200217144050.3i4ymbytogod4ijn@kili.mountain Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

hwmon: (adt7462) Fix an error return in ADT7462_REG_VOLT()

2020-03-11T13:15:12+00:00

commit 44f2f882909fedfc3a56e4b90026910456019743 upstream. This is only called from adt7462_update_device(). The caller expects it to return zero on error. I fixed a similar issue earlier in commit a4bf06d58f21 ("hwmon: (adt7462) ADT7462_REG_VOLT_MAX() should return 0") but I missed this one. Fixes: c0b4e3ab0c76 ("adt7462: new hwmon driver") Signed-off-by: Dan Carpenter Reviewed-by: Darrick J. Wong Link: https://lore.kernel.org/r/20200303101608.kqjwfcazu2ylhi2a@kili.mountain Signed-off-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

ARM: dts: imx7-colibri: Fix frequency for sd/mmc

2020-03-11T13:15:12+00:00

commit 2773fe1d31c42ffae2a9cb9a6055d99dd86e2fee upstream. SD/MMC on Colibri iMX7S/D modules successfully support 200Mhz frequency in HS200 mode. Removing the unnecessary max-frequency limit significantly increases the performance: == before fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 252 MB in 3.02 seconds = 83.54 MB/sec ================== === after fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 408 MB in 3.00 seconds = 135.94 MB/sec ================== Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support") Signed-off-by: Oleksandr Suvorov Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman

ARM: dts: am437x-idk-evm: Fix incorrect OPP node names

2020-03-11T13:15:11+00:00

commit 31623468be0bf57617b8057dcd335693935a9491 upstream. The commit 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU") adjusts couple of OPP nodes defined in the common am4372.dtsi file, but used outdated node names. This results in these getting treated as new OPP nodes with missing properties. Fix this properly by using the correct node names as updated in commit b9cb2ba71848 ("ARM: dts: Use - instead of @ for DT OPP entries for TI SoCs"). Reported-by: Roger Quadros Fixes: 337c6c9a69af ("ARM: dts: am437x-idk-evm: Disable OPP50 for MPU") Signed-off-by: Suman Anna Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman