kernel/linux.git, branch v4.14.222

Linux 4.14.222

2021-02-23T13:00:34+00:00

Tested-by: Guenter Roeck Tested-by: Jason Self Tested-by: Linux Kernel Functional Testing Link: https://lore.kernel.org/r/20210222121027.174911182@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman

kvm: check tlbs_dirty directly

2021-02-23T13:00:34+00:00

commit 88bf56d04bc3564542049ec4ec168a8b60d0b48c upstream In kvm_mmu_notifier_invalidate_range_start(), tlbs_dirty is used as: need_tlb_flush |= kvm->tlbs_dirty; with need_tlb_flush's type being int and tlbs_dirty's type being long. It means that tlbs_dirty is always used as int and the higher 32 bits is useless. We need to check tlbs_dirty in a correct way and this change checks it directly without propagating it to need_tlb_flush. Note: it's _extremely_ unlikely this neglecting of higher 32 bits can cause problems in practice. It would require encountering tlbs_dirty on a 4 billion count boundary, and KVM would need to be using shadow paging or be running a nested guest. Cc: stable@vger.kernel.org Fixes: a4ee1ca4a36e ("KVM: MMU: delay flush all tlbs on sync_page path") Signed-off-by: Lai Jiangshan Message-Id: <20201217154118.16497-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

usb: gadget: u_ether: Fix MTU size mismatch with RX packet size

2021-02-23T13:00:34+00:00

commit 0a88fa221ce911c331bf700d2214c5b2f77414d3 upstream Fix the MTU size issue with RX packet size as the host sends the packet with extra bytes containing ethernet header. This causes failure when user sets the MTU size to the maximum i.e. 15412. In this case the ethernet packet received will be of length 15412 plus the ethernet header length. This patch fixes the issue where there is a check that RX packet length must not be more than max packet length. Fixes: bba787a860fa ("usb: gadget: ether: Allow jumbo frames") Signed-off-by: Manish Narani Cc: stable Link: https://lore.kernel.org/r/1605597215-122027-1-git-send-email-manish.narani@xilinx.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

USB: Gadget Ethernet: Re-enable Jumbo frames.

2021-02-23T13:00:34+00:00

commit eea52743eb5654ec6f52b0e8b4aefec952543697 upstream Fixes: ("net: use core MTU range checking") which patched only one of two functions used to setup the USB Gadget Ethernet driver, causing a serious performance regression in the ability to increase mtu size above 1500. Signed-off-by: John Greb Signed-off-by: Felipe Balbi Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

scsi: qla2xxx: Fix crash during driver load on big endian machines

2021-02-23T13:00:34+00:00

commit 8de309e7299a00b3045fb274f82b326f356404f0 upstream Crash stack: [576544.715489] Unable to handle kernel paging request for data at address 0xd00000000f970000 [576544.715497] Faulting instruction address: 0xd00000000f880f64 [576544.715503] Oops: Kernel access of bad area, sig: 11 [#1] [576544.715506] SMP NR_CPUS=2048 NUMA pSeries : [576544.715703] NIP [d00000000f880f64] .qla27xx_fwdt_template_valid+0x94/0x100 [qla2xxx] [576544.715722] LR [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx] [576544.715726] Call Trace: [576544.715731] [c0000004d0ffb000] [c0000006fe02c350] 0xc0000006fe02c350 (unreliable) [576544.715750] [c0000004d0ffb080] [d00000000f7952dc] .qla24xx_load_risc_flash+0x2fc/0x590 [qla2xxx] [576544.715770] [c0000004d0ffb170] [d00000000f7aa034] .qla81xx_load_risc+0x84/0x1a0 [qla2xxx] [576544.715789] [c0000004d0ffb210] [d00000000f79f7c8] .qla2x00_setup_chip+0xc8/0x910 [qla2xxx] [576544.715808] [c0000004d0ffb300] [d00000000f7a631c] .qla2x00_initialize_adapter+0x4dc/0xb00 [qla2xxx] [576544.715826] [c0000004d0ffb3e0] [d00000000f78ce28] .qla2x00_probe_one+0xf08/0x2200 [qla2xxx] Link: https://lore.kernel.org/r/20201202132312.19966-8-njavali@marvell.com Fixes: f73cb695d3ec ("[SCSI] qla2xxx: Add support for ISP2071.") Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani Signed-off-by: Arun Easi Signed-off-by: Nilesh Javali Signed-off-by: Martin K. Petersen [sudip: adjust context] Signed-off-by: Sudip Mukherjee Signed-off-by: Greg Kroah-Hartman

xen-blkback: fix error handling in xen_blkbk_map()

2021-02-23T13:00:34+00:00

commit 871997bc9e423f05c7da7c9178e62dde5df2a7f8 upstream. The function uses a goto-based loop, which may lead to an earlier error getting discarded by a later iteration. Exit this ad-hoc loop when an error was encountered. The out-of-memory error path additionally fails to fill a structure field looked at by xen_blkbk_unmap_prepare() before inspecting the handle which does get properly set (to BLKBACK_INVALID_HANDLE). Since the earlier exiting from the ad-hoc loop requires the same field filling (invalidation) as that on the out-of-memory path, fold both paths. While doing so, drop the pr_alert(), as extra log messages aren't going to help the situation (the kernel will log oom conditions already anyway). This is XSA-365. Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Reviewed-by: Julien Grall Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen-scsiback: don't "handle" error by BUG()

2021-02-23T13:00:34+00:00

commit 7c77474b2d22176d2bfb592ec74e0f2cb71352c9 upstream. In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen-netback: don't "handle" error by BUG()

2021-02-23T13:00:34+00:00

commit 3194a1746e8aabe86075fd3c5e7cf1f4632d7f16 upstream. In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen-blkback: don't "handle" error by BUG()

2021-02-23T13:00:34+00:00

commit 5a264285ed1cd32e26d9de4f3c8c6855e467fd63 upstream. In particular -ENOMEM may come back here, from set_foreign_p2m_mapping(). Don't make problems worse, the more that handling elsewhere (together with map's status fields now indicating whether a mapping wasn't even attempted, and hence has to be considered failed) doesn't require this odd way of dealing with errors. This is part of XSA-362. Signed-off-by: Jan Beulich Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

xen/arm: don't ignore return errors from set_phys_to_machine

2021-02-23T13:00:33+00:00

commit 36bf1dfb8b266e089afa9b7b984217f17027bf35 upstream. set_phys_to_machine can fail due to lack of memory, see the kzalloc call in arch/arm/xen/p2m.c:__set_phys_to_machine_multi. Don't ignore the potential return error in set_foreign_p2m_mapping, returning it to the caller instead. This is part of XSA-361. Signed-off-by: Stefano Stabellini Cc: stable@vger.kernel.org Reviewed-by: Julien Grall Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman