kernel/linux.git, branch v4.14.199

Linux 4.14.199

2020-09-23T08:46:37+00:00

Tested-by: Jon Hunter Tested-by: Guenter Roeck Link: https://lore.kernel.org/lkml/20200921162035.541285330@linuxfoundation.org/ Signed-off-by: Greg Kroah-Hartman

x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y

2020-09-23T08:46:37+00:00

commit 72a9c673636b779e370983fea08e40f97039b981 upstream. A spanking new machine I just got has all but one USB ports wired as 3.0. Booting defconfig resulted in no keyboard or mouse, which was pretty uncool. Let's enable that -- USB3 is ubiquitous rather than an oddity. As 'y' not 'm' -- recovering from initrd problems needs a keyboard. Also add it to the 32-bit defconfig. Signed-off-by: Adam Borowski Cc: Greg Kroah-Hartman Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-usb@vger.kernel.org Link: http://lkml.kernel.org/r/20181009062803.4332-1-kilobyte@angband.pl Signed-off-by: Ingo Molnar Cc: Andy Shevchenko Signed-off-by: Greg Kroah-Hartman

powerpc/dma: Fix dma_map_ops::get_required_mask

2020-09-23T08:46:37+00:00

commit 437ef802e0adc9f162a95213a3488e8646e5fc03 upstream. There are 2 problems with it: 1. "<" vs expected "<<" 2. the shift number is an IOMMU page number mask, not an address mask as the IOMMU page shift is missing. This did not hit us before f1565c24b596 ("powerpc: use the generic dma_ops_bypass mode") because we had additional code to handle bypass mask so this chunk (almost?) never executed.However there were reports that aacraid does not work with "iommu=nobypass". After f1565c24b596, aacraid (and probably others which call dma_get_required_mask() before setting the mask) was unable to enable 64bit DMA and fall back to using IOMMU which was known not to work, one of the problems is double free of an IOMMU page. This fixes DMA for aacraid, both with and without "iommu=nobypass" in the kernel command line. Verified with "stress-ng -d 4". Fixes: 6a5c7be5e484 ("powerpc: Override dma_get_required_mask by platform hook and ops") Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Alexey Kardashevskiy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20200908015106.79661-1-aik@ozlabs.ru Signed-off-by: Greg Kroah-Hartman

ehci-hcd: Move include to keep CRC stable

2020-09-23T08:46:36+00:00

commit 29231826f3bd65500118c473fccf31c0cf14dbc0 upstream. The CRC calculation done by genksyms is triggered when the parser hits EXPORT_SYMBOL*() macros. At this point, genksyms recursively expands the types of the function parameters, and uses that as the input for the CRC calculation. In the case of forward-declared structs, the type expands to 'UNKNOWN'. Following this, it appears that the result of the expansion of each type is cached somewhere, and seems to be re-used when/if the same type is seen again for another exported symbol in the same C file. Unfortunately, this can cause CRC 'stability' issues when a struct definition becomes visible in the middle of a C file. For example, let's assume code with the following pattern: struct foo; int bar(struct foo *arg) { /* Do work ... */ } EXPORT_SYMBOL_GPL(bar); /* This contains struct foo's definition */ #include "foo.h" int baz(struct foo *arg) { /* Do more work ... */ } EXPORT_SYMBOL_GPL(baz); Here, baz's CRC will be computed using the expansion of struct foo that was cached after bar's CRC calculation ('UNKOWN' here). But if EXPORT_SYMBOL_GPL(bar) is removed from the file (because of e.g. symbol trimming using CONFIG_TRIM_UNUSED_KSYMS), struct foo will be expanded late, during baz's CRC calculation, which now has visibility over the full struct definition, hence resulting in a different CRC for baz. The proper fix for this certainly is in genksyms, but that will take me some time to get right. In the meantime, we have seen one occurrence of this in the ehci-hcd code which hits this problem because of the way it includes C files halfway through the code together with an unlucky mix of symbol trimming. In order to workaround this, move the include done in ehci-hub.c early in ehci-hcd.c, hence making sure the struct definitions are visible to the entire file. This improves CRC stability of the ehci-hcd exports even when symbol trimming is enabled. Acked-by: Alan Stern Cc: stable Signed-off-by: Quentin Perret Link: https://lore.kernel.org/r/20200916171825.3228122-1-qperret@google.com Signed-off-by: Greg Kroah-Hartman

serial: 8250_pci: Add Realtek 816a and 816b

2020-09-23T08:46:36+00:00

commit 3c5a87be170aba8ac40982182f812dcff6ed1ad1 upstream. These serial ports are exposed by the OOB-management-engine on RealManage-enabled network cards (e.g. AMD DASH enabled systems using Realtek cards). Because these have 3 BARs, they fail the "num_iomem <= 1" check in serial_pci_guess_board. I've manually checked the two IOMEM regions and BAR 2 doesn't seem to respond to reads, but BAR 4 seems to be an MMIO version of the IO ports (untested). With this change, the ports are detected: 0000:02:00.1: ttyS0 at I/O 0x2200 (irq = 82, base_baud = 115200) is a 16550A 0000:02:00.2: ttyS1 at I/O 0x2100 (irq = 55, base_baud = 115200) is a 16550A lspci output: 02:00.1 0700: 10ec:816a (rev 0e) (prog-if 02 [16550]) Subsystem: 17aa:5082 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ SERR- Cc: stable Link: https://lore.kernel.org/r/20200914173628.GA22508@yamamaya.is-a-geek.org Signed-off-by: Greg Kroah-Hartman

Input: i8042 - add Entroware Proteus EL07R4 to nomux and reset lists

2020-09-23T08:46:36+00:00

commit c4440b8a457779adeec42c5e181cb4016f19ce0f upstream. The keyboard drops keypresses early during boot unless both the nomux and reset quirks are set. Add DMI table entries for this. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806085 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200907095656.13155-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

Input: trackpoint - add new trackpoint variant IDs

2020-09-23T08:46:36+00:00

commit 6c77545af100a72bf5e28142b510ba042a17648d upstream. Add trackpoint variant IDs to allow supported control on Synaptics trackpoints. Signed-off-by: Vincent Huang Link: https://lore.kernel.org/r/20200914120327.2592-1-vincent.huang@tw.synaptics.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman

percpu: fix first chunk size calculation for populated bitmap

2020-09-23T08:46:36+00:00

commit b3b33d3c43bbe0177d70653f4e889c78cc37f097 upstream. Variable populated, which is a member of struct pcpu_chunk, is used as a unit of size of unsigned long. However, size of populated is miscounted. So, I fix this minor part. Fixes: 8ab16c43ea79 ("percpu: change the number of pages marked in the first_chunk pop bitmap") Cc: # 4.14+ Signed-off-by: Sunghyun Jin Signed-off-by: Dennis Zhou Signed-off-by: Greg Kroah-Hartman

i2c: i801: Fix resume bug

2020-09-23T08:46:36+00:00

commit 66d402e2e9455cf0213c42b97f22a0493372d7cc upstream. On suspend the original host configuration gets restored. The resume routine has to undo this, otherwise the SMBus master may be left in disabled state or in i2c mode. [JD: Rebased on v5.8, moved the write into i801_setup_hstcfg.] Signed-off-by: Volker Rümelin Signed-off-by: Jean Delvare Signed-off-by: Wolfram Sang Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

usblp: fix race between disconnect() and read()

2020-09-23T08:46:36+00:00

commit 9cdabcb3ef8c24ca3a456e4db7b012befb688e73 upstream. read() needs to check whether the device has been disconnected before it tries to talk to the device. Signed-off-by: Oliver Neukum Reported-by: syzbot+be5b5f86a162a6c281e6@syzkaller.appspotmail.com Link: https://lore.kernel.org/r/20200917103427.15740-1-oneukum@suse.com Cc: stable Signed-off-by: Greg Kroah-Hartman