kernel/linux.git, branch v4.14.194

Linux 4.14.194

2020-08-21T07:48:24+00:00

Tested-by: Jon Hunter Tested-by: Guenter Roeck Tested-by: Shuah Khan Signed-off-by: Greg Kroah-Hartman

dm cache: remove all obsolete writethrough-specific code

2020-08-21T07:48:24+00:00

commit 9958f1d9a04efb3db19134482b3f4c6897e0e7b8 upstream. Now that the writethrough code is much simpler there is no need to track so much state or cascade bio submission (as was done, via writethrough_endio(), to issue origin then cache IO in series). As such the obsolete writethrough list and workqueue is also removed. Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm cache: submit writethrough writes in parallel to origin and cache

2020-08-21T07:48:23+00:00

commit 2df3bae9a6543e90042291707b8db0cbfbae9ee9 upstream. Discontinue issuing writethrough write IO in series to the origin and then cache. Use bio_clone_fast() to create a new origin clone bio that will be mapped to the origin device and then bio_chain() it to the bio that gets remapped to the cache device. The origin clone bio does _not_ have a copy of the per_bio_data -- as such check_if_tick_bio_needed() will not be called. The cache bio (parent bio) will not complete until the origin bio has completed -- this fulfills bio_clone_fast()'s requirements as well as the requirement to not complete the original IO until the write IO has completed to both the origin and cache device. Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

dm cache: pass cache structure to mode functions

2020-08-21T07:48:23+00:00

commit 8e3c3827776fc93728c0c8d7c7b731226dc6ee23 upstream. No functional changes, just a bit cleaner than passing cache_features structure. Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

genirq/affinity: Make affinity setting if activated opt-in

2020-08-21T07:48:23+00:00

commit f0c7baca180046824e07fc5f1326e83a8fd150c7 upstream. John reported that on a RK3288 system the perf per CPU interrupts are all affine to CPU0 and provided the analysis: "It looks like what happens is that because the interrupts are not per-CPU in the hardware, armpmu_request_irq() calls irq_force_affinity() while the interrupt is deactivated and then request_irq() with IRQF_PERCPU | IRQF_NOBALANCING. Now when irq_startup() runs with IRQ_STARTUP_NORMAL, it calls irq_setup_affinity() which returns early because IRQF_PERCPU and IRQF_NOBALANCING are set, leaving the interrupt on its original CPU." This was broken by the recent commit which blocked interrupt affinity setting in hardware before activation of the interrupt. While this works in general, it does not work for this particular case. As contrary to the initial analysis not all interrupt chip drivers implement an activate callback, the safe cure is to make the deferred interrupt affinity setting at activation time opt-in. Implement the necessary core logic and make the two irqchip implementations for which this is required opt-in. In hindsight this would have been the right thing to do, but ... Fixes: baedb87d1b53 ("genirq/affinity: Handle affinity setting on inactive interrupts correctly") Reported-by: John Keeping Signed-off-by: Thomas Gleixner Tested-by: Marc Zyngier Acked-by: Marc Zyngier Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/87blk4tzgm.fsf@nanos.tec.linutronix.de [fllinden@amazon.com - backported to 4.14] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

genirq/affinity: Handle affinity setting on inactive interrupts correctly

2020-08-21T07:48:23+00:00

commit baedb87d1b53532f81b4bd0387f83b05d4f7eb9a upstream. Setting interrupt affinity on inactive interrupts is inconsistent when hierarchical irq domains are enabled. The core code should just store the affinity and not call into the irq chip driver for inactive interrupts because the chip drivers may not be in a state to handle such requests. X86 has a hacky workaround for that but all other irq chips have not which causes problems e.g. on GIC V3 ITS. Instead of adding more ugly hacks all over the place, solve the problem in the core code. If the affinity is set on an inactive interrupt then: - Store it in the irq descriptors affinity mask - Update the effective affinity to reflect that so user space has a consistent view - Don't call into the irq chip driver This is the core equivalent of the X86 workaround and works correctly because the affinity setting is established in the irq chip when the interrupt is activated later on. Note, that this is only effective when hierarchical irq domains are enabled by the architecture. Doing it unconditionally would break legacy irq chip implementations. For hierarchial irq domains this works correctly as none of the drivers can have a dependency on affinity setting in inactive state by design. Remove the X86 workaround as it is not longer required. Fixes: 02edee152d6e ("x86/apic/vector: Ignore set_affinity call for inactive interrupts") Reported-by: Ali Saidi Signed-off-by: Thomas Gleixner Tested-by: Ali Saidi Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de [fllinden@amazon.com - 4.14 never had the x86 workaround, so skip x86 changes] Signed-off-by: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

khugepaged: retract_page_tables() remember to test exit

2020-08-21T07:48:23+00:00

commit 18e77600f7a1ed69f8ce46c9e11cad0985712dfa upstream. Only once have I seen this scenario (and forgot even to notice what forced the eventual crash): a sequence of "BUG: Bad page map" alerts from vm_normal_page(), from zap_pte_range() servicing exit_mmap(); pmd:00000000, pte values corresponding to data in physical page 0. The pte mappings being zapped in this case were supposed to be from a huge page of ext4 text (but could as well have been shmem): my belief is that it was racing with collapse_file()'s retract_page_tables(), found *pmd pointing to a page table, locked it, but *pmd had become 0 by the time start_pte was decided. In most cases, that possibility is excluded by holding mmap lock; but exit_mmap() proceeds without mmap lock. Most of what's run by khugepaged checks khugepaged_test_exit() after acquiring mmap lock: khugepaged_collapse_pte_mapped_thps() and hugepage_vma_revalidate() do so, for example. But retract_page_tables() did not: fix that. The fix is for retract_page_tables() to check khugepaged_test_exit(), after acquiring mmap lock, before doing anything to the page table. Getting the mmap lock serializes with __mmput(), which briefly takes and drops it in __khugepaged_exit(); then the khugepaged_test_exit() check on mm_users makes sure we don't touch the page table once exit_mmap() might reach it, since exit_mmap() will be proceeding without mmap lock, not expecting anyone to be racing with it. Fixes: f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages") Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Acked-by: Kirill A. Shutemov Cc: Andrea Arcangeli Cc: Mike Kravetz Cc: Song Liu Cc: [4.8+] Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2008021215400.27773@eggly.anvils Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

sh: landisk: Add missing initialization of sh_io_port_base

2020-08-21T07:48:23+00:00

[ Upstream commit 0c64a0dce51faa9c706fdf1f957d6f19878f4b81 ] The Landisk setup code maps the CF IDE area using ioremap_prot(), and passes the resulting virtual addresses to the pata_platform driver, disguising them as I/O port addresses. Hence the pata_platform driver translates them again using ioport_map(). As CONFIG_GENERIC_IOMAP=n, and CONFIG_HAS_IOPORT_MAP=y, the SuperH-specific mapping code in arch/sh/kernel/ioport.c translates I/O port addresses to virtual addresses by adding sh_io_port_base, which defaults to -1, thus breaking the assumption of an identity mapping. Fix this by setting sh_io_port_base to zero. Fixes: 37b7a97884ba64bf ("sh: machvec IO death.") Signed-off-by: Geert Uytterhoeven Signed-off-by: Rich Felker Signed-off-by: Sasha Levin

tools build feature: Quote CC and CXX for their arguments

2020-08-21T07:48:23+00:00

[ Upstream commit fa5c893181ed2ca2f96552f50073786d2cfce6c0 ] When using a cross-compilation environment, such as OpenEmbedded, the CC an CXX variables are set to something more than just a command: there are arguments (such as --sysroot) that need to be passed on to the compiler so that the right set of headers and libraries are used. For the particular case that our systems detected, CC is set to the following: export CC="aarch64-linaro-linux-gcc --sysroot=/oe/build/tmp/work/machine/perf/1.0-r9/recipe-sysroot" Without quotes, detection is as follows: Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:414: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop. Makefile.perf:230: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 With CC and CXX quoted, some of those features are now detected. Fixes: e3232c2f39ac ("tools build feature: Use CC and CXX from parent") Signed-off-by: Daniel Díaz Reviewed-by: Thomas Hebb Cc: Alexei Starovoitov Cc: Andrii Nakryiko Cc: Daniel Borkmann Cc: Jiri Olsa Cc: John Fastabend Cc: KP Singh Cc: Martin KaFai Lau Cc: Namhyung Kim Cc: Song Liu Cc: Stephane Eranian Cc: Yonghong Song Link: http://lore.kernel.org/lkml/20200812221518.2869003-1-daniel.diaz@linaro.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin

perf bench mem: Always memset source before memcpy

2020-08-21T07:48:23+00:00

[ Upstream commit 1beaef29c34154ccdcb3f1ae557f6883eda18840 ] For memcpy, the source pages are memset to zero only when --cycles is used. This leads to wildly different results with or without --cycles, since all sources pages are likely to be mapped to the same zero page without explicit writes. Before this fix: $ export cmd="./perf stat -e LLC-loads -- ./perf bench \ mem memcpy -s 1024MB -l 100 -f default" $ $cmd 2,935,826 LLC-loads 3.821677452 seconds time elapsed $ $cmd --cycles 217,533,436 LLC-loads 8.616725985 seconds time elapsed After this fix: $ $cmd 214,459,686 LLC-loads 8.674301124 seconds time elapsed $ $cmd --cycles 214,758,651 LLC-loads 8.644480006 seconds time elapsed Fixes: 47b5757bac03c338 ("perf bench mem: Move boilerplate memory allocation to the infrastructure") Signed-off-by: Vincent Whitchurch Cc: Alexander Shishkin Cc: Jiri Olsa Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: kernel@axis.com Link: http://lore.kernel.org/lkml/20200810133404.30829-1-vincent.whitchurch@axis.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin