kernel/linux.git, branch v4.14.188

Linux 4.14.188

2020-07-09T07:36:33+00:00

efi: Make it possible to disable efivar_ssdt entirely

2020-07-09T07:36:33+00:00

commit 435d1a471598752446a72ad1201b3c980526d869 upstream. In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables are tied to specific Kconfig options. Currently this is not the case for modifying the ACPI SSDT via the efivar_ssdt kernel command line option and associated EFI variable. This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults disabled, in order to allow enabling or disabling that feature during the build. Cc: Signed-off-by: Peter Jones Link: https://lore.kernel.org/r/20200615202408.2242614-1-pjones@redhat.com Signed-off-by: Ard Biesheuvel Signed-off-by: Greg Kroah-Hartman

dm zoned: assign max_io_len correctly

2020-07-09T07:36:33+00:00

commit 7b2377486767503d47265e4d487a63c651f6b55d upstream. The unit of max_io_len is sector instead of byte (spotted through code review), so fix it. Fixes: 3b1a94c88b79 ("dm zoned: drive-managed zoned block device target") Cc: stable@vger.kernel.org Signed-off-by: Hou Tao Reviewed-by: Damien Le Moal Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman

irqchip/gic: Atomically update affinity

2020-07-09T07:36:32+00:00

commit 005c34ae4b44f085120d7f371121ec7ded677761 upstream. The GIC driver uses a RMW sequence to update the affinity, and relies on the gic_lock_irqsave/gic_unlock_irqrestore sequences to update it atomically. But these sequences only expand into anything meaningful if the BL_SWITCHER option is selected, which almost never happens. It also turns out that using a RMW and locks is just as silly, as the GIC distributor supports byte accesses for the GICD_TARGETRn registers, which when used make the update atomic by definition. Drop the terminally broken code and replace it by a byte write. Fixes: 04c8b0f82c7d ("irqchip/gic: Make locking a BL_SWITCHER only feature") Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier Signed-off-by: Greg Kroah-Hartman

MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen

2020-07-09T07:36:32+00:00

commit fcec538ef8cca0ad0b84432235dccd9059c8e6f8 upstream. This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011660e ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd935c34b ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by: Hauke Mehrtens Cc: Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman

cifs: Fix the target file was deleted when rename failed.

2020-07-09T07:36:32+00:00

commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2 upstream. When xfstest generic/035, we found the target file was deleted if the rename return -EACESS. In cifs_rename2, we unlink the positive target dentry if rename failed with EACESS or EEXIST, even if the target dentry is positived before rename. Then the existing file was deleted. We should just delete the target file which created during the rename. Reported-by: Hulk Robot Signed-off-by: Zhang Xiaoxu Cc: stable@vger.kernel.org Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Signed-off-by: Greg Kroah-Hartman

SMB3: Honor persistent/resilient handle flags for multiuser mounts

2020-07-09T07:36:32+00:00

commit 00dfbc2f9c61185a2e662f27c45a0bb29b2a134f upstream. Without this: - persistent handles will only be enabled for per-user tcons if the server advertises the 'Continuous Availabity' capability - resilient handles would never be enabled for per-user tcons Signed-off-by: Paul Aurich CC: Stable Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Signed-off-by: Greg Kroah-Hartman

SMB3: Honor 'seal' flag for multiuser mounts

2020-07-09T07:36:32+00:00

commit cc15461c73d7d044d56c47e869a215e49bd429c8 upstream. Ensure multiuser SMB3 mounts use encryption for all users' tcons if the mount options are configured to require encryption. Without this, only the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user tcons would only be encrypted if the server was configured to require encryption. Signed-off-by: Paul Aurich CC: Stable Signed-off-by: Steve French Reviewed-by: Aurelien Aptel Signed-off-by: Greg Kroah-Hartman

Revert "ALSA: usb-audio: Improve frames size computation"

2020-07-09T07:36:32+00:00

This reverts commit 99703c921864a318e3e8aae74fde071b1ff35bea which is commit f0bd62b64016508938df9babe47f65c2c727d25c upstream. It causes a number of reported issues and a fix for it has not hit Linus's tree yet. Revert this to resolve those problems. Cc: Alexander Tsoy Cc: Takashi Iwai Cc: Sasha Levin Cc: Hans de Goede Signed-off-by: Greg Kroah-Hartman

nfsd: apply umask on fs without ACL support

2020-07-09T07:36:31+00:00

commit 22cf8419f1319ff87ec759d0ebdff4cbafaee832 upstream. The server is failing to apply the umask when creating new objects on filesystems without ACL support. To reproduce this, you need to use NFSv4.2 and a client and server recent enough to support umask, and you need to export a filesystem that lacks ACL support (for example, ext4 with the "noacl" mount option). Filesystems with ACL support are expected to take care of the umask themselves (usually by calling posix_acl_create). For filesystems without ACL support, this is up to the caller of vfs_create(), vfs_mknod(), or vfs_mkdir(). Reported-by: Elliott Mitchell Reported-by: Salvatore Bonaccorso Tested-by: Salvatore Bonaccorso Fixes: 47057abde515 ("nfsd: add support for the umask attribute") Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman