kernel/linux.git, branch v4.14.175

Linux 4.14.175

2020-04-02T14:34:38+00:00

arm64: dts: ls1046ardb: set RGMII interfaces to RGMII_ID mode

2020-04-02T14:34:38+00:00

commit d79e9d7c1e4ba5f95f2ff3541880c40ea9722212 upstream. The correct setting for the RGMII ports on LS1046ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1046ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii". Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: 3fa395d2c48a ("arm64: dts: add LS1046A DPAA FMan nodes") Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

arm64: dts: ls1043a-rdb: correct RGMII delay mode to rgmii-id

2020-04-02T14:34:38+00:00

commit 4022d808c45277693ea86478fab1f081ebf997e8 upstream. The correct setting for the RGMII ports on LS1043ARDB is to enable delay on both Rx and Tx so the interface mode used must be PHY_INTERFACE_MODE_RGMII_ID. Since commit 1b3047b5208a80 ("net: phy: realtek: add support for configuring the RX delay on RTL8211F") the Realtek 8211F PHY driver has control over the RGMII RX delay and it is disabling it for RGMII_TXID. The LS1043ARDB uses two such PHYs in RGMII_ID mode but in the device tree the mode was described as "rgmii_txid". This issue was not apparent at the time as the PHY driver took the same action for RGMII_TXID and RGMII_ID back then but it became visible (RX no longer working) after the above patch. Changing the phy-connection-type to "rgmii-id" to address the issue. Fixes: bf02f2ffe59c ("arm64: dts: add LS1043A DPAA FMan support") Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

ARM: bcm2835-rpi-zero-w: Add missing pinctrl name

2020-04-02T14:34:38+00:00

commit 6687c201fdc3139315c2ea7ef96c157672805cdc upstream. Define the sdhci pinctrl state as "default" so it gets applied correctly and to match all other RPis. Fixes: 2c7c040c73e9 ("ARM: dts: bcm2835: Add Raspberry Pi Zero W") Signed-off-by: Nick Hudson Signed-off-by: Florian Fainelli Signed-off-by: Greg Kroah-Hartman

ARM: dts: oxnas: Fix clear-mask property

2020-04-02T14:34:38+00:00

commit deeabb4c1341a12bf8b599e6a2f4cfa4fd74738c upstream. Disable all rps-irq interrupts during driver initialization to prevent an accidental interrupt on GIC. Fixes: 84316f4ef141 ("ARM: boot: dts: Add Oxford Semiconductor OX810SE dtsi") Fixes: 38d4a53733f5 ("ARM: dts: Add support for OX820 and Pogoplug V3") Signed-off-by: Sungbo Eo Acked-by: Neil Armstrong Signed-off-by: Neil Armstrong Signed-off-by: Greg Kroah-Hartman

perf map: Fix off by one in strncpy() size argument

2020-04-02T14:34:38+00:00

commit db2c549407d4a76563c579e4768f7d6d32afefba upstream. This patch fixes an off-by-one error in strncpy size argument in tools/perf/util/map.c. The issue is that in: strncmp(filename, "/system/lib/", 11) the passed string literal: "/system/lib/" has 12 bytes (without the NULL byte) and the passed size argument is 11. As a result, the logic won't match the ending "/" byte and will pass filepaths that are stored in other directories e.g. "/system/libmalicious/bin" or just "/system/libmalicious". This functionality seems to be present only on Android. I assume the /system/ directory is only writable by the root user, so I don't think this bug has much (or any) security impact. Fixes: eca818369996 ("perf tools: Add automatic remapping of Android libraries") Signed-off-by: disconnect3d Cc: Alexander Shishkin Cc: Changbin Du Cc: Jiri Olsa Cc: John Keeping Cc: Mark Rutland Cc: Michael Lentine Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Song Liu Cc: Stephane Eranian Link: http://lore.kernel.org/lkml/20200309104855.3775-1-dominik.b.czarnota@gmail.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman

arm64: alternative: fix build with clang integrated assembler

2020-04-02T14:34:37+00:00

commit 6f5459da2b8736720afdbd67c4bd2d1edba7d0e3 upstream. Building an arm64 defconfig with clang's integrated assembler, this error occurs: :2:2: error: unrecognized instruction mnemonic _ASM_EXTABLE 9999b, 9f ^ arch/arm64/mm/cache.S:50:1: note: while in macro instantiation user_alt 9f, "dc cvau, x4", "dc civac, x4", 0 ^ While GNU as seems fine with case-sensitive macro instantiations, clang doesn't, so use the actual macro name (_asm_extable) as in the rest of the file. Also checked that the generated assembly matches the GCC output. Reviewed-by: Nick Desaulniers Tested-by: Nick Desaulniers Fixes: 290622efc76e ("arm64: fix "dc cvau" cache operation on errata-affected core") Link: https://github.com/ClangBuiltLinux/linux/issues/924 Signed-off-by: Ilie Halip Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman

net: ks8851-ml: Fix IO operations, again

2020-04-02T14:34:37+00:00

commit 8262e6f9b1034ede34548a04dec4c302d92c9497 upstream. This patch reverts 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") and edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access"), because it turns out these were only necessary due to buggy hardware. This patch adds a check for such a buggy hardware to prevent any such mistakes again. While working further on the KS8851 driver, it came to light that the KS8851-16MLL is capable of switching bus endianness by a hardware strap, EESK pin. If this strap is incorrect, the IO accesses require such endian swapping as is being reverted by this patch. Such swapping also impacts the performance significantly. Hence, in addition to removing it, detect that the hardware is broken, report to user, and fail to bind with such hardware. Fixes: 58292104832f ("net: ks8851-ml: Fix 16-bit IO operation") Fixes: edacb098ea9c ("net: ks8851-ml: Fix 16-bit data access") Signed-off-by: Marek Vasut Cc: David S. Miller Cc: Lukas Wunner Cc: Petr Stetiar Cc: YueHaibing Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

gpiolib: acpi: Add quirk to ignore EC wakeups on HP x2 10 CHT + AXP288 model

2020-04-02T14:34:37+00:00

commit 0c625ccfe6f754d0896b8881f5c85bcb81699f1f upstream. There are at least 3 models of the HP x2 10 models: Bay Trail SoC + AXP288 PMIC Cherry Trail SoC + AXP288 PMIC Cherry Trail SoC + TI PMIC Like on the other HP x2 10 models we need to ignore wakeup for ACPI GPIO events on the external embedded-controller pin to avoid spurious wakeups on the HP x2 10 CHT + AXP288 model too. This commit adds an extra DMI based quirk for the HP x2 10 CHT + AXP288 model, ignoring wakeups for ACPI GPIO events on the EC interrupt pin on this model. This fixes spurious wakeups from suspend on this model. Fixes: aa23ca3d98f7 ("gpiolib: acpi: Add honor_wakeup module-option + quirk mechanism") Reported-and-tested-by: Marc Lehmann Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20200302111225.6641-4-hdegoede@redhat.com Acked-by: Mika Westerberg Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

bpf: Explicitly memset some bpf info structures declared on the stack

2020-04-02T14:34:37+00:00

commit 5c6f25887963f15492b604dd25cb149c501bbabf upstream. Trying to initialize a structure with "= {};" will not always clean out all padding locations in a structure. So be explicit and call memset to initialize everything for a number of bpf information structures that are then copied from userspace, sometimes from smaller memory locations than the size of the structure. Reported-by: Daniel Borkmann Signed-off-by: Greg Kroah-Hartman Signed-off-by: Daniel Borkmann Acked-by: Yonghong Song Link: https://lore.kernel.org/bpf/20200320162258.GA794295@kroah.com Signed-off-by: Greg Kroah-Hartman