kernel/linux.git, branch v4.14.133

Linux 4.14.133

2019-07-10T07:54:43+00:00

stable/btrfs: fix backport bug in d819d97ea025 ("btrfs: honor path->skip_locking in backref code")

2019-07-10T07:54:43+00:00

Upstream commit 38e3eebff643 ("btrfs: honor path->skip_locking in backref code") was incorrectly backported to 4.14.y . It misses removal of two lines from original commit, what cause deadlock. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203993 Reported-by: Olivier Mazouffre Fixes: d819d97ea025 ("btrfs: honor path->skip_locking in backref code") Signed-off-by: Stanislaw Gruszka Reviewed-by: Nikolay Borisov Signed-off-by: Greg Kroah-Hartman

dmaengine: imx-sdma: remove BD_INTR for channel0

2019-07-10T07:54:43+00:00

commit 3f93a4f297961c12bb17aa16cb3a4d1291823cae upstream. It is possible for an irq triggered by channel0 to be received later after clks are disabled once firmware loaded during sdma probe. If that happens then clearing them by writing to SDMA_H_INTR won't work and the kernel will hang processing infinite interrupts. Actually, don't need interrupt triggered on channel0 since it's pollling SDMA_H_STATSTOP to know channel0 done rather than interrupt in current code, just clear BD_INTR to disable channel0 interrupt to avoid the above case. This issue was brought by commit 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") which didn't take care the above case. Fixes: 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") Cc: stable@vger.kernel.org #5.0+ Signed-off-by: Robin Gong Reported-by: Sven Van Asbroeck Tested-by: Sven Van Asbroeck Reviewed-by: Michael Olbrich Signed-off-by: Vinod Koul Signed-off-by: Greg Kroah-Hartman

MIPS: Add missing EHB in mtc0 -> mfc0 sequence.

2019-07-10T07:54:43+00:00

commit 0b24cae4d535045f4c9e177aa228d4e97bad212c upstream. Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence. Without this execution hazard barrier it's possible for the value read back from the KScratch register to be the value from before the mtc0. Reproducible on P5600 & P6600. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register Signed-off-by: Dmitry Korotin [paul.burton@mips.com: - Commit message tweaks. - Add Fixes tags. - Mark for stable back to v3.15 where P5600 support was introduced.] Signed-off-by: Paul Burton Fixes: 3d8bfdd03072 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer.") Fixes: 829dcc0a956a ("MIPS: Add MIPS P5600 probe support") Cc: linux-mips@vger.kernel.org Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Greg Kroah-Hartman

MIPS: Fix bounds check virt_addr_valid

2019-07-10T07:54:43+00:00

commit d6ed083f5cc621e15c15b56c3b585fd524dbcb0f upstream. The bounds check used the uninitialized variable vaddr, it should use the given parameter kaddr instead. When using the uninitialized value the compiler assumed it to be 0 and optimized this function to just return 0 in all cases. This should make the function check the range of the given address and only do the page map check in case it is in the expected range of virtual addresses. Fixes: 074a1e1167af ("MIPS: Bounds check virt_addr_valid") Cc: stable@vger.kernel.org # v4.12+ Cc: Paul Burton Signed-off-by: Hauke Mehrtens Signed-off-by: Paul Burton Cc: ralf@linux-mips.org Cc: jhogan@kernel.org Cc: f4bug@amsat.org Cc: linux-mips@vger.kernel.org Cc: ysu@wavecomp.com Cc: jcristau@debian.org Signed-off-by: Greg Kroah-Hartman

svcrdma: Ignore source port when computing DRC hash

2019-07-10T07:54:43+00:00

commit 1e091c3bbf51d34d5d96337a59ce5ab2ac3ba2cc upstream. The DRC appears to be effectively empty after an RPC/RDMA transport reconnect. The problem is that each connection uses a different source port, which defeats the DRC hash. Clients always have to disconnect before they send retransmissions to reset the connection's credit accounting, thus every retransmit on NFS/RDMA will miss the DRC. An NFS/RDMA client's IP source port is meaningless for RDMA transports. The transport layer typically sets the source port value on the connection to a random ephemeral port. The server already ignores it for the "secure port" check. See commit 16e4d93f6de7 ("NFSD: Ignore client's source port on RDMA transports"). The Linux NFS server's DRC resolves XID collisions from the same source IP address by using the checksum of the first 200 bytes of the RPC call header. Signed-off-by: Chuck Lever Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: J. Bruce Fields Signed-off-by: Greg Kroah-Hartman

KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC

2019-07-10T07:54:43+00:00

commit bb34e690e9340bc155ebed5a3d75fc63ff69e082 upstream. Thomas reported that: | Background: | | In preparation of supporting IPI shorthands I changed the CPU offline | code to software disable the local APIC instead of just masking it. | That's done by clearing the APIC_SPIV_APIC_ENABLED bit in the APIC_SPIV | register. | | Failure: | | When the CPU comes back online the startup code triggers occasionally | the warning in apic_pending_intr_clear(). That complains that the IRRs | are not empty. | | The offending vector is the local APIC timer vector who's IRR bit is set | and stays set. | | It took me quite some time to reproduce the issue locally, but now I can | see what happens. | | It requires apicv_enabled=0, i.e. full apic emulation. With apicv_enabled=1 | (and hardware support) it behaves correctly. | | Here is the series of events: | | Guest CPU | | goes down | | native_cpu_disable() | | apic_soft_disable(); | | play_dead() | | .... | | startup() | | if (apic_enabled()) | apic_pending_intr_clear() <- Not taken | | enable APIC | | apic_pending_intr_clear() <- Triggers warning because IRR is stale | | When this happens then the deadline timer or the regular APIC timer - | happens with both, has fired shortly before the APIC is disabled, but the | interrupt was not serviced because the guest CPU was in an interrupt | disabled region at that point. | | The state of the timer vector ISR/IRR bits: | | ISR IRR | before apic_soft_disable() 0 1 | after apic_soft_disable() 0 1 | | On startup 0 1 | | Now one would assume that the IRR is cleared after the INIT reset, but this | happens only on CPU0. | | Why? | | Because our CPU0 hotplug is just for testing to make sure nothing breaks | and goes through an NMI wakeup vehicle because INIT would send it through | the boots-trap code which is not really working if that CPU was not | physically unplugged. | | Now looking at a real world APIC the situation in that case is: | | ISR IRR | before apic_soft_disable() 0 1 | after apic_soft_disable() 0 1 | | On startup 0 0 | | Why? | | Once the dying CPU reenables interrupts the pending interrupt gets | delivered as a spurious interupt and then the state is clear. | | While that CPU0 hotplug test case is surely an esoteric issue, the APIC | emulation is still wrong, Even if the play_dead() code would not enable | interrupts then the pending IRR bit would turn into an ISR .. interrupt | when the APIC is reenabled on startup. From SDM 10.4.7.2 Local APIC State After It Has Been Software Disabled * Pending interrupts in the IRR and ISR registers are held and require masking or handling by the CPU. In Thomas's testing, hardware cpu will not respect soft disable LAPIC when IRR has already been set or APICv posted-interrupt is in flight, so we can skip soft disable APIC checking when clearing IRR and set ISR, continue to respect soft disable APIC when attempting to set IRR. Reported-by: Rong Chen Reported-by: Feng Tang Reported-by: Thomas Gleixner Tested-by: Thomas Gleixner Cc: Paolo Bonzini Cc: Radim Krčmář Cc: Thomas Gleixner Cc: Rong Chen Cc: Feng Tang Cc: stable@vger.kernel.org Signed-off-by: Wanpeng Li Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

KVM: x86: degrade WARN to pr_warn_ratelimited

2019-07-10T07:54:42+00:00

commit 3f16a5c318392cbb5a0c7a3d19dff8c8ef3c38ee upstream. This warning can be triggered easily by userspace, so it should certainly not cause a panic if panic_on_warn is set. Reported-by: syzbot+c03f30b4f4c46bdf8575@syzkaller.appspotmail.com Suggested-by: Alexander Potapenko Acked-by: Alexander Potapenko Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman

ARC: handle gcc generated __builtin_trap for older compiler

2019-07-10T07:54:42+00:00

commit af1be2e21203867cb958aaceed5366e2e24b88e8 upstream. ARC gcc prior to GNU 2018.03 release didn't have a target specific __builtin_trap() implementation, generating default abort() call. Implement the abort() call - emulating what newer gcc does for the same, as suggested by Arnd. Acked-by: Arnd Bergmann Signed-off-by: Vineet Gupta Signed-off-by: Greg Kroah-Hartman

tty: rocket: fix incorrect forward declaration of 'rp_init()'

2019-07-10T07:54:42+00:00

[ Upstream commit 423ea3255424b954947d167681b71ded1b8fca53 ] Make the forward declaration actually match the real function definition, something that previous versions of gcc had just ignored. This is another patch to fix new warnings from gcc-9 before I start the merge window pulls. I don't want to miss legitimate new warnings just because my system update brought a new compiler with new warnings. Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin