kernel/linux.git, branch v4.14.130

Linux 4.14.130

2019-06-25T03:36:55+00:00

mac80211: Do not use stack memory with scatterlist for GMAC

2019-06-25T03:36:55+00:00

commit a71fd9dac23613d96ba3c05619a8ef4fd6cdf9b9 upstream. ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and that does not allow use of stack memory (e.g., BUG_ON() is hit in sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this since it can use the skb data buffer, but the RX side was using a stack variable for deriving the local MIC value to compare against the received one. Fix this by allocating heap memory for the mic buffer. This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that BUG_ON() and kernel panic. Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: handle deauthentication/disassociation from TDLS peer

2019-06-25T03:36:55+00:00

commit 79c92ca42b5a3e0ea172ea2ce8df8e125af237da upstream. When receiving a deauthentication/disassociation frame from a TDLS peer, a station should not disconnect the current AP, but only disable the current TDLS link if it's enabled. Without this change, a TDLS issue can be reproduced by following the steps as below: 1. STA-1 and STA-2 are connected to AP, bidirection traffic is running between STA-1 and STA-2. 2. Set up TDLS link between STA-1 and STA-2, stay for a while, then teardown TDLS link. 3. Repeat step #2 and monitor the connection between STA and AP. During the test, one STA may send a deauthentication/disassociation frame to another, after TDLS teardown, with reason code 6/7, which means: Class 2/3 frame received from nonassociated STA. On receive this frame, the receiver STA will disconnect the current AP and then reconnect. It's not a expected behavior, purpose of this frame should be disabling the TDLS link, not the link with AP. Cc: stable@vger.kernel.org Signed-off-by: Yu Wang Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

mac80211: drop robust management frames from unknown TA

2019-06-25T03:36:54+00:00

commit 588f7d39b3592a36fb7702ae3b8bdd9be4621e2f upstream. When receiving a robust management frame, drop it if we don't have rx->sta since then we don't have a security association and thus couldn't possibly validate the frame. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

cfg80211: fix memory leak of wiphy device name

2019-06-25T03:36:54+00:00

commit 4f488fbca2a86cc7714a128952eead92cac279ab upstream. In wiphy_new_nm(), if an error occurs after dev_set_name() and device_initialize() have already been called, it's necessary to call put_device() (via wiphy_free()) to avoid a memory leak. Reported-by: syzbot+7fddca22578bc67c3fe4@syzkaller.appspotmail.com Fixes: 1f87f7d3a3b4 ("cfg80211: add rfkill support") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers Signed-off-by: Johannes Berg Signed-off-by: Greg Kroah-Hartman

SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write

2019-06-25T03:36:54+00:00

commit 8d526d62db907e786fd88948c75d1833d82bd80e upstream. Some servers such as Windows 10 will return STATUS_INSUFFICIENT_RESOURCES as the number of simultaneous SMB3 requests grows (even though the client has sufficient credits). Return EAGAIN on STATUS_INSUFFICIENT_RESOURCES so that we can retry writes which fail with this status code. This (for example) fixes large file copies to Windows 10 on fast networks. Signed-off-by: Steve French CC: Stable Reviewed-by: Ronnie Sahlberg Reviewed-by: Pavel Shilovsky Signed-off-by: Greg Kroah-Hartman

Bluetooth: Fix regression with minimum encryption key size alignment

2019-06-25T03:36:54+00:00

commit 693cd8ce3f882524a5d06f7800dd8492411877b3 upstream. When trying to align the minimum encryption key size requirement for Bluetooth connections, it turns out doing this in a central location in the HCI connection handling code is not possible. Original Bluetooth version up to 2.0 used a security model where the L2CAP service would enforce authentication and encryption. Starting with Bluetooth 2.1 and Secure Simple Pairing that model has changed into that the connection initiator is responsible for providing an encrypted ACL link before any L2CAP communication can happen. Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and before devices are causing a regression. The encryption key size check needs to be moved out of the HCI connection handling into the L2CAP channel setup. To achieve this, the current check inside hci_conn_security() has been moved into l2cap_check_enc_key_size() helper function and then called from four decisions point inside L2CAP to cover all combinations of Secure Simple Pairing enabled devices and device using legacy pairing and legacy service security model. Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643 Signed-off-by: Marcel Holtmann Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Bluetooth: Align minimum encryption key size for LE and BR/EDR connections

2019-06-25T03:36:54+00:00

commit d5bb334a8e171b262e48f378bd2096c0ea458265 upstream. The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

ARM: dts: am57xx-idk: Remove support for voltage switching for SD card

2019-06-25T03:36:54+00:00

commit 88a748419b84187fd1da05637b8e5928b04a1e06 upstream. If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Since am571x-, am572x- and am574x-idk don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Cc: Signed-off-by: Faiz Abbas Signed-off-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman

ARM: imx: cpuidle-imx6sx: Restrict the SW2ISO increase to i.MX6SX

2019-06-25T03:36:54+00:00

commit b25af2ff7c07bd19af74e3f64ff82e2880d13d81 upstream. Since commit 1e434b703248 ("ARM: imx: update the cpu power up timing setting on i.mx6sx") some characters loss is noticed on i.MX6ULL UART as reported by Christoph Niedermaier. The intention of such commit was to increase the SW2ISO field for i.MX6SX only, but since cpuidle-imx6sx is also used on i.MX6UL/i.MX6ULL this caused unintended side effects on other SoCs. Fix this problem by keeping the original SW2ISO value for i.MX6UL/i.MX6ULL and only increase SW2ISO in the i.MX6SX case. Cc: stable@vger.kernel.org Fixes: 1e434b703248 ("ARM: imx: update the cpu power up timing setting on i.mx6sx") Reported-by: Christoph Niedermaier Signed-off-by: Fabio Estevam Tested-by: Sébastien Szymanski Tested-by: Christoph Niedermaier Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman