kernel/linux.git, branch v4.12.14

Linux 4.12.14

2017-09-20T06:25:38+00:00

ipv6: Fix may be used uninitialized warning in rt6_check

2017-09-20T06:22:11+00:00

commit 3614364527daa870264f6dde77f02853cdecd02c upstream. rt_cookie might be used uninitialized, fix this by initializing it. Fixes: c5cff8561d2d ("ipv6: add rcu grace period before freeing fib6_node") Signed-off-by: Steffen Klassert Signed-off-by: David S. Miller Cc: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman

md/raid5: release/flush io in raid5_do_work()

2017-09-20T06:22:11+00:00

commit 9c72a18e46ebe0f09484cce8ebf847abdab58498 upstream. In raid5, there are scenarios where some ios are deferred to a later time, and some IO need a flush to complete. To make sure we make progress with these IOs, we need to call the following functions: flush_deferred_bios(conf); r5l_flush_stripe_to_raid(conf->log); Both of these functions are called in raid5d(), but missing in raid5_do_work(). As a result, these functions are not called when multi-threading (group_thread_cnt > 0) is enabled. This patch adds calls to these function to raid5_do_work(). Note for stable branches: r5l_flush_stripe_to_raid(conf->log) is need for 4.4+ flush_deferred_bios(conf) is only needed for 4.11+ Signed-off-by: Song Liu Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

md/raid1/10: reset bio allocated from mempool

2017-09-20T06:22:11+00:00

commit 208410b546207cfc4c832635fa46419cfa86b4cd upstream. Data allocated from mempool doesn't always get initialized, this happens when the data is reused instead of fresh allocation. In the raid1/10 case, we must reinitialize the bios. Reported-by: Jonathan G. Underwood Fixes: f0250618361d(md: raid10: don't use bio's vec table to manage resync pages) Fixes: 98d30c5812c3(md: raid1: don't use bio's vec table to manage resync pages) Cc: Ming Lei Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

idr: remove WARN_ON_ONCE() when trying to replace negative ID

2017-09-20T06:22:11+00:00

commit a47f68d6a944113bdc8097db6f933c2e17c27bf9 upstream. IDR only supports non-negative IDs. There used to be a 'WARN_ON_ONCE(id < 0)' in idr_replace(), but it was intentionally removed by commit 2e1c9b286765 ("idr: remove WARN_ON_ONCE() on negative IDs"). Then it was added back by commit 0a835c4f090a ("Reimplement IDR and IDA using the radix tree"). However it seems that adding it back was a mistake, given that some users such as drm_gem_handle_delete() (DRM_IOCTL_GEM_CLOSE) pass in a value from userspace to idr_replace(), allowing the WARN_ON_ONCE to be triggered. drm_gem_handle_delete() actually just wants idr_replace() to return an error code if the ID is not allocated, including in the case where the ID is invalid (negative). So once again remove the bogus WARN_ON_ONCE(). This bug was found by syzkaller, which encountered the following warning: WARNING: CPU: 3 PID: 3008 at lib/idr.c:157 idr_replace+0x1d8/0x240 lib/idr.c:157 Kernel panic - not syncing: panic_on_warn set ... CPU: 3 PID: 3008 Comm: syzkaller218828 Not tainted 4.13.0-rc4-next-20170811 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: fixup_bug+0x40/0x90 arch/x86/kernel/traps.c:190 do_trap_no_signal arch/x86/kernel/traps.c:224 [inline] do_trap+0x260/0x390 arch/x86/kernel/traps.c:273 do_error_trap+0x120/0x390 arch/x86/kernel/traps.c:310 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:323 invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:930 RIP: 0010:idr_replace+0x1d8/0x240 lib/idr.c:157 RSP: 0018:ffff8800394bf9f8 EFLAGS: 00010297 RAX: ffff88003c6c60c0 RBX: 1ffff10007297f43 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800394bfa78 RBP: ffff8800394bfae0 R08: ffffffff82856487 R09: 0000000000000000 R10: ffff8800394bf9a8 R11: ffff88006c8bae28 R12: ffffffffffffffff R13: ffff8800394bfab8 R14: dffffc0000000000 R15: ffff8800394bfbc8 drm_gem_handle_delete+0x33/0xa0 drivers/gpu/drm/drm_gem.c:297 drm_gem_close_ioctl+0xa1/0xe0 drivers/gpu/drm/drm_gem.c:671 drm_ioctl_kernel+0x1e7/0x2e0 drivers/gpu/drm/drm_ioctl.c:729 drm_ioctl+0x72e/0xa50 drivers/gpu/drm/drm_ioctl.c:825 vfs_ioctl fs/ioctl.c:45 [inline] do_vfs_ioctl+0x1b1/0x1520 fs/ioctl.c:685 SYSC_ioctl fs/ioctl.c:700 [inline] SyS_ioctl+0x8f/0xc0 fs/ioctl.c:691 entry_SYSCALL_64_fastpath+0x1f/0xbe Here is a C reproducer: #include #include #include #include #include int main(void) { int cardfd = open("/dev/dri/card0", O_RDONLY); ioctl(cardfd, DRM_IOCTL_GEM_CLOSE, &(struct drm_gem_close) { .handle = -1 } ); } Link: http://lkml.kernel.org/r/20170906235306.20534-1-ebiggers3@gmail.com Fixes: 0a835c4f090a ("Reimplement IDR and IDA using the radix tree") Signed-off-by: Eric Biggers Acked-by: Tejun Heo Cc: Dmitry Vyukov Cc: Matthew Wilcox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

fuse: allow server to run in different pid_ns

2017-09-20T06:22:11+00:00

commit 5d6d3a301c4e749e04be6fcdcf4cb1ffa8bae524 upstream. Commit 0b6e9ea041e6 ("fuse: Add support for pid namespaces") broke Sandstorm.io development tools, which have been sending FUSE file descriptors across PID namespace boundaries since early 2014. The above patch added a check that prevented I/O on the fuse device file descriptor if the pid namespace of the reader/writer was different from the pid namespace of the mounter. With this change passing the device file descriptor to a different pid namespace simply doesn't work. The check was added because pids are transferred to/from the fuse userspace server in the namespace registered at mount time. To fix this regression, remove the checks and do the following: 1) the pid in the request header (the pid of the task that initiated the filesystem operation) is translated to the reader's pid namespace. If a mapping doesn't exist for this pid, then a zero pid is used. Note: even if a mapping would exist between the initiator task's pid namespace and the reader's pid namespace the pid will be zero if either mapping from initator's to mounter's namespace or mapping from mounter's to reader's namespace doesn't exist. 2) The lk.pid value in setlk/setlkw requests and getlk reply is left alone. Userspace should not interpret this value anyway. Also allow the setlk/setlkw operations if the pid of the task cannot be represented in the mounter's namespace (pid being zero in that case). Reported-by: Kenton Varda Signed-off-by: Miklos Szeredi Fixes: 0b6e9ea041e6 ("fuse: Add support for pid namespaces") Cc: Eric W. Biederman Cc: Seth Forshee Signed-off-by: Greg Kroah-Hartman

x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs

2017-09-20T06:22:11+00:00

commit e137a4d8f4dd2e277e355495b6b2cb241a8693c3 upstream. Switching FS and GS is a mess, and the current code is still subtly wrong: it assumes that "Loading a nonzero value into FS sets the index and base", which is false on AMD CPUs if the value being loaded is 1, 2, or 3. (The current code came from commit 3e2b68d752c9 ("x86/asm, sched/x86: Rewrite the FS and GS context switch code"), which made it better but didn't fully fix it.) Rewrite it to be much simpler and more obviously correct. This should fix it fully on AMD CPUs and shouldn't adversely affect performance. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Chang Seok Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps

2017-09-20T06:22:11+00:00

commit 9584d98bed7a7a904d0702ad06bbcc94703cb5b4 upstream. In ELF_COPY_CORE_REGS, we're copying from the current task, so accessing thread.fsbase and thread.gsbase makes no sense. Just read the values from the CPU registers. In practice, the old code would have been correct most of the time simply because thread.fsbase and thread.gsbase usually matched the CPU registers. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Chang Seok Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common

2017-09-20T06:22:11+00:00

commit 767d035d838f4fd6b5a5bbd7a3f6d293b7f65a49 upstream. execve used to leak FSBASE and GSBASE on AMD CPUs. Fix it. The security impact of this bug is small but not quite zero -- it could weaken ASLR when a privileged task execs a less privileged program, but only if program changed bitness across the exec, or the child binary was highly unusual or actively malicious. A child program that was compromised after the exec would not have access to the leaked base. Signed-off-by: Andy Lutomirski Cc: Borislav Petkov Cc: Borislav Petkov Cc: Brian Gerst Cc: Chang Seok Cc: Denys Vlasenko Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

f2fs: check hot_data for roll-forward recovery

2017-09-20T06:22:11+00:00

commit 125c9fb1ccb53eb2ea9380df40f3c743f3fb2fed upstream. We need to check HOT_DATA to truncate any previous data block when doing roll-forward recovery. Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman