kernel/linux.git, branch v3.16.62

Linux 3.16.62

2018-12-16T22:09:47+00:00

xen-netfront: fix warn message as irq device name has '/'

2018-12-16T22:09:46+00:00

commit 21f2706b20100bb3db378461ab9b8e2035309b5b upstream. There is a call trace generated after commit 2d408c0d4574b01b9ed45e02516888bf925e11a9( xen-netfront: fix queue name setting). There is no 'device/vif/xx-q0-tx' file found under /proc/irq/xx/. This patch only picks up device type and id as its name. With the patch, now /proc/interrupts looks like below and the warning message gone: 70: 21 0 0 0 xen-dyn -event vif0-q0-tx 71: 15 0 0 0 xen-dyn -event vif0-q0-rx 72: 14 0 0 0 xen-dyn -event vif0-q1-tx 73: 33 0 0 0 xen-dyn -event vif0-q1-rx 74: 12 0 0 0 xen-dyn -event vif0-q2-tx 75: 24 0 0 0 xen-dyn -event vif0-q2-rx 76: 19 0 0 0 xen-dyn -event vif0-q3-tx 77: 21 0 0 0 xen-dyn -event vif0-q3-rx Below is call trace information without this patch: name 'device/vif/0-q0-tx' WARNING: CPU: 2 PID: 37 at fs/proc/generic.c:174 __xlate_proc_name+0x85/0xa0 RIP: 0010:__xlate_proc_name+0x85/0xa0 RSP: 0018:ffffb85c40473c18 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000006 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000096 RDI: ffff984c7f516930 RBP: ffffb85c40473cb8 R08: 000000000000002c R09: 0000000000000229 R10: 0000000000000000 R11: 0000000000000001 R12: ffffb85c40473c98 R13: ffffb85c40473cb8 R14: ffffb85c40473c50 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff984c7f500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f69b6899038 CR3: 000000001c20a006 CR4: 00000000001606e0 Call Trace: __proc_create+0x45/0x230 ? snprintf+0x49/0x60 proc_mkdir_data+0x35/0x90 register_handler_proc+0xef/0x110 ? proc_register+0xfc/0x110 ? proc_create_data+0x70/0xb0 __setup_irq+0x39b/0x660 ? request_threaded_irq+0xad/0x160 request_threaded_irq+0xf5/0x160 ? xennet_tx_buf_gc+0x1d0/0x1d0 [xen_netfront] bind_evtchn_to_irqhandler+0x3d/0x70 ? xenbus_alloc_evtchn+0x41/0xa0 netback_changed+0xa46/0xcda [xen_netfront] ? find_watch+0x40/0x40 xenwatch_thread+0xc5/0x160 ? finish_wait+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x70/0x70 ret_from_fork+0x35/0x40 Code: 81 5c 00 48 85 c0 75 cc 5b 49 89 2e 31 c0 5d 4d 89 3c 24 41 5c 41 5d 41 5e 41 5f c3 4c 89 ee 48 c7 c7 40 4f 0e b4 e8 65 ea d8 ff <0f> 0b b8 fe ff ff ff 5b 5d 41 5c 41 5d 41 5e 41 5f c3 66 0f 1f ---[ end trace 650e5561b0caab3a ]--- Signed-off-by: Xiao Liang Reviewed-by: Juergen Gross Signed-off-by: David S. Miller [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

cdrom: fix improper type cast, which can leat to information leak.

2018-12-16T22:09:46+00:00

commit e4f3aa2e1e67bb48dfbaaf1cad59013d5a5bc276 upstream. There is another cast from unsigned long to int which causes a bounds check to fail with specially crafted input. The value is then used as an index in the slot array in cdrom_slot_status(). This issue is similar to CVE-2018-16658 and CVE-2018-10940. Signed-off-by: Young_X Signed-off-by: Jens Axboe Signed-off-by: Ben Hutchings

xfs: don't fail when converting shortform attr to long form during ATTR_REPLACE

2018-12-16T22:09:46+00:00

commit 7b38460dc8e4eafba06c78f8e37099d3b34d473c upstream. Kanda Motohiro reported that expanding a tiny xattr into a large xattr fails on XFS because we remove the tiny xattr from a shortform fork and then try to re-add it after converting the fork to extents format having not removed the ATTR_REPLACE flag. This fails because the attr is no longer present, causing a fs shutdown. This is derived from the patch in his bug report, but we really shouldn't ignore a nonzero retval from the remove call. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199119 Reported-by: kanda.motohiro@gmail.com Reviewed-by: Dave Chinner Reviewed-by: Christoph Hellwig Signed-off-by: Darrick J. Wong [bwh: Backported to 3.16: adjust filename] Signed-off-by: Ben Hutchings

mremap: properly flush TLB before releasing the page

2018-12-16T22:09:45+00:00

commit eb66ae030829605d61fbef1909ce310e29f78821 upstream. Jann Horn points out that our TLB flushing was subtly wrong for the mremap() case. What makes mremap() special is that we don't follow the usual "add page to list of pages to be freed, then flush tlb, and then free pages". No, mremap() obviously just _moves_ the page from one page table location to another. That matters, because mremap() thus doesn't directly control the lifetime of the moved page with a freelist: instead, the lifetime of the page is controlled by the page table locking, that serializes access to the entry. As a result, we need to flush the TLB not just before releasing the lock for the source location (to avoid any concurrent accesses to the entry), but also before we release the destination page table lock (to avoid the TLB being flushed after somebody else has already done something to that page). This also makes the whole "need_flush" logic unnecessary, since we now always end up flushing the TLB for every valid entry. Reported-and-tested-by: Jann Horn Acked-by: Will Deacon Tested-by: Ingo Molnar Acked-by: Peter Zijlstra (Intel) Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman [will: backport to 4.4 stable] Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

mm: cleancache: fix corruption on missed inode invalidation

2018-12-16T22:09:45+00:00

commit 6ff38bd40230af35e446239396e5fc8ebd6a5248 upstream. If all pages are deleted from the mapping by memory reclaim and also moved to the cleancache: __delete_from_page_cache (no shadow case) unaccount_page_cache_page cleancache_put_page page_cache_delete mapping->nrpages -= nr (nrpages becomes 0) We don't clean the cleancache for an inode after final file truncation (removal). truncate_inode_pages_final check (nrpages || nrexceptional) is false no truncate_inode_pages no cleancache_invalidate_inode(mapping) These way when reading the new file created with same inode we may get these trash leftover pages from cleancache and see wrong data instead of the contents of the new file. Fix it by always doing truncate_inode_pages which is already ready for nrpages == 0 && nrexceptional == 0 case and just invalidates inode. [akpm@linux-foundation.org: add comment, per Jan] Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com Fixes: commit 91b0abe36a7b ("mm + fs: store shadow entries in page cache") Signed-off-by: Pavel Tikhomirov Reviewed-by: Vasily Averin Reviewed-by: Andrey Ryabinin Reviewed-by: Jan Kara Cc: Johannes Weiner Cc: Mel Gorman Cc: Matthew Wilcox Cc: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings

posix-timers: Sanitize overrun handling

2018-12-16T22:09:45+00:00

commit 78c9c4dfbf8c04883941445a195276bb4bb92c76 upstream. The posix timer overrun handling is broken because the forwarding functions can return a huge number of overruns which does not fit in an int. As a consequence timer_getoverrun(2) and siginfo::si_overrun can turn into random number generators. The k_clock::timer_forward() callbacks return a 64 bit value now. Make k_itimer::ti_overrun[_last] 64bit as well, so the kernel internal accounting is correct. 3Remove the temporary (int) casts. Add a helper function which clamps the overrun value returned to user space via timer_getoverrun(2) or siginfo::si_overrun limited to a positive value between 0 and INT_MAX. INT_MAX is an indicator for user space that the overrun value has been clamped. Reported-by: Team OWL337 Signed-off-by: Thomas Gleixner Acked-by: John Stultz Cc: Peter Zijlstra Cc: Michael Kerrisk Link: https://lkml.kernel.org/r/20180626132705.018623573@linutronix.de [bwh: Backported to 3.16: adjust filenames, context] Signed-off-by: Ben Hutchings

wil6210: missing length check in wmi_set_ie

2018-12-16T22:09:44+00:00

commit b5a8ffcae4103a9d823ea3aa3a761f65779fbe2a upstream. Add a length check in wmi_set_ie to detect unsigned integer overflow. Signed-off-by: Lior David Signed-off-by: Maya Erez Signed-off-by: Kalle Valo [bwh: Backported to 3.16: return directly rather than via "out" label] Signed-off-by: Ben Hutchings

KEYS: encrypted: fix buffer overread in valid_master_desc()

2018-12-16T22:09:44+00:00

commit 794b4bc292f5d31739d89c0202c54e7dc9bc3add upstream. With the 'encrypted' key type it was possible for userspace to provide a data blob ending with a master key description shorter than expected, e.g. 'keyctl add encrypted desc "new x" @s'. When validating such a master key description, validate_master_desc() could read beyond the end of the buffer. Fix this by using strncmp() instead of memcmp(). [Also clean up the code to deduplicate some logic.] Cc: Mimi Zohar Signed-off-by: Eric Biggers Signed-off-by: David Howells Signed-off-by: James Morris Signed-off-by: Ben Hutchings

cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE

2018-12-16T22:09:44+00:00

commit 9bd616e3dbedfc103f158197c8ad93678849b1ed upstream. The cpuidle_devices per-CPU variable is only defined when CPU_IDLE is enabled. Commit c8cc7d4de7a4 ("sched/idle: Reorganize the idle loop") removed the #ifdef CONFIG_CPU_IDLE around cpuidle_idle_call() with the compiler optimising away __this_cpu_read(cpuidle_devices). However, with CONFIG_UBSAN && !CONFIG_CPU_IDLE, this optimisation no longer happens and the kernel fails to link since cpuidle_devices is not defined. This patch introduces an accessor function for the current CPU cpuidle device (returning NULL when !CONFIG_CPU_IDLE) and uses it in cpuidle_idle_call(). Signed-off-by: Catalin Marinas Signed-off-by: Rafael J. Wysocki Signed-off-by: Ben Hutchings