kernel/linux.git, branch v3.10.61

Linux 3.10.61

2014-11-21T17:23:22+00:00

mm: memcg: handle non-error OOM situations more gracefully

2014-11-21T17:22:56+00:00

commit 4942642080ea82d99ab5b653abb9a12b7ba31f4a upstream. Commit 3812c8c8f395 ("mm: memcg: do not trap chargers with full callstack on OOM") assumed that only a few places that can trigger a memcg OOM situation do not return VM_FAULT_OOM, like optional page cache readahead. But there are many more and it's impractical to annotate them all. First of all, we don't want to invoke the OOM killer when the failed allocation is gracefully handled, so defer the actual kill to the end of the fault handling as well. This simplifies the code quite a bit for added bonus. Second, since a failed allocation might not be the abrupt end of the fault, the memcg OOM handler needs to be re-entrant until the fault finishes for subsequent allocation attempts. If an allocation is attempted after the task already OOMed, allow it to bypass the limit so that it can quickly finish the fault and invoke the OOM killer. Reported-by: azurIt Signed-off-by: Johannes Weiner Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman

mm: memcg: do not trap chargers with full callstack on OOM

2014-11-21T17:22:56+00:00

commit 3812c8c8f3953921ef18544110dafc3505c1ac62 upstream. The memcg OOM handling is incredibly fragile and can deadlock. When a task fails to charge memory, it invokes the OOM killer and loops right there in the charge code until it succeeds. Comparably, any other task that enters the charge path at this point will go to a waitqueue right then and there and sleep until the OOM situation is resolved. The problem is that these tasks may hold filesystem locks and the mmap_sem; locks that the selected OOM victim may need to exit. For example, in one reported case, the task invoking the OOM killer was about to charge a page cache page during a write(), which holds the i_mutex. The OOM killer selected a task that was just entering truncate() and trying to acquire the i_mutex: OOM invoking task: mem_cgroup_handle_oom+0x241/0x3b0 mem_cgroup_cache_charge+0xbe/0xe0 add_to_page_cache_locked+0x4c/0x140 add_to_page_cache_lru+0x22/0x50 grab_cache_page_write_begin+0x8b/0xe0 ext3_write_begin+0x88/0x270 generic_file_buffered_write+0x116/0x290 __generic_file_aio_write+0x27c/0x480 generic_file_aio_write+0x76/0xf0 # takes ->i_mutex do_sync_write+0xea/0x130 vfs_write+0xf3/0x1f0 sys_write+0x51/0x90 system_call_fastpath+0x18/0x1d OOM kill victim: do_truncate+0x58/0xa0 # takes i_mutex do_last+0x250/0xa30 path_openat+0xd7/0x440 do_filp_open+0x49/0xa0 do_sys_open+0x106/0x240 sys_open+0x20/0x30 system_call_fastpath+0x18/0x1d The OOM handling task will retry the charge indefinitely while the OOM killed task is not releasing any resources. A similar scenario can happen when the kernel OOM killer for a memcg is disabled and a userspace task is in charge of resolving OOM situations. In this case, ALL tasks that enter the OOM path will be made to sleep on the OOM waitqueue and wait for userspace to free resources or increase the group's limit. But a userspace OOM handler is prone to deadlock itself on the locks held by the waiting tasks. For example one of the sleeping tasks may be stuck in a brk() call with the mmap_sem held for writing but the userspace handler, in order to pick an optimal victim, may need to read files from /proc/, which tries to acquire the same mmap_sem for reading and deadlocks. This patch changes the way tasks behave after detecting a memcg OOM and makes sure nobody loops or sleeps with locks held: 1. When OOMing in a user fault, invoke the OOM killer and restart the fault instead of looping on the charge attempt. This way, the OOM victim can not get stuck on locks the looping task may hold. 2. When OOMing in a user fault but somebody else is handling it (either the kernel OOM killer or a userspace handler), don't go to sleep in the charge context. Instead, remember the OOMing memcg in the task struct and then fully unwind the page fault stack with -ENOMEM. pagefault_out_of_memory() will then call back into the memcg code to check if the -ENOMEM came from the memcg, and then either put the task to sleep on the memcg's OOM waitqueue or just restart the fault. The OOM victim can no longer get stuck on any lock a sleeping task may hold. Debugged by Michal Hocko. Signed-off-by: Johannes Weiner Reported-by: azurIt Acked-by: Michal Hocko Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman

mm: memcg: rework and document OOM waiting and wakeup

2014-11-21T17:22:56+00:00

commit fb2a6fc56be66c169f8b80e07ed999ba453a2db2 upstream. The memcg OOM handler open-codes a sleeping lock for OOM serialization (trylock, wait, repeat) because the required locking is so specific to memcg hierarchies. However, it would be nice if this construct would be clearly recognizable and not be as obfuscated as it is right now. Clean up as follows: 1. Remove the return value of mem_cgroup_oom_unlock() 2. Rename mem_cgroup_oom_lock() to mem_cgroup_oom_trylock(). 3. Pull the prepare_to_wait() out of the memcg_oom_lock scope. This makes it more obvious that the task has to be on the waitqueue before attempting to OOM-trylock the hierarchy, to not miss any wakeups before going to sleep. It just didn't matter until now because it was all lumped together into the global memcg_oom_lock spinlock section. 4. Pull the mem_cgroup_oom_notify() out of the memcg_oom_lock scope. It is proctected by the hierarchical OOM-lock. 5. The memcg_oom_lock spinlock is only required to propagate the OOM lock in any given hierarchy atomically. Restrict its scope to mem_cgroup_oom_(trylock|unlock). 6. Do not wake up the waitqueue unconditionally at the end of the function. Only the lockholder has to wake up the next in line after releasing the lock. Note that the lockholder kicks off the OOM-killer, which in turn leads to wakeups from the uncharges of the exiting task. But a contender is not guaranteed to see them if it enters the OOM path after the OOM kills but before the lockholder releases the lock. Thus there has to be an explicit wakeup after releasing the lock. 7. Put the OOM task on the waitqueue before marking the hierarchy as under OOM as that is the point where we start to receive wakeups. No point in listening before being on the waitqueue. 8. Likewise, unmark the hierarchy before finishing the sleep, for symmetry. Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman

mm: memcg: enable memcg OOM killer only for user faults

2014-11-21T17:22:56+00:00

commit 519e52473ebe9db5cdef44670d5a97f1fd53d721 upstream. System calls and kernel faults (uaccess, gup) can handle an out of memory situation gracefully and just return -ENOMEM. Enable the memcg OOM killer only for user faults, where it's really the only option available. Signed-off-by: Johannes Weiner Acked-by: Michal Hocko Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman

x86: finish user fault error path with fatal signal

2014-11-21T17:22:56+00:00

commit 3a13c4d761b4b979ba8767f42345fed3274991b0 upstream. The x86 fault handler bails in the middle of error handling when the task has a fatal signal pending. For a subsequent patch this is a problem in OOM situations because it relies on pagefault_out_of_memory() being called even when the task has been killed, to perform proper per-task OOM state unwinding. Shortcutting the fault like this is a rather minor optimization that saves a few instructions in rare cases. Just remove it for user-triggered faults. Use the opportunity to split the fault retry handling from actual fault errors and add locking documentation that reads suprisingly similar to ARM's. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Acked-by: KOSAKI Motohiro Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman

arch: mm: pass userspace fault flag to generic fault handler

2014-11-21T17:22:56+00:00

commit 759496ba6407c6994d6a5ce3a5e74937d7816208 upstream. Unlike global OOM handling, memory cgroup code will invoke the OOM killer in any OOM situation because it has no way of telling faults occuring in kernel context - which could be handled more gracefully - from user-triggered faults. Pass a flag that identifies faults originating in user space from the architecture-specific fault handlers to generic code so that memcg OOM handling can be improved. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Cc: KOSAKI Motohiro Signed-off-by: Andrew Morton Signed-off-by: Cong Wang Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

arch: mm: do not invoke OOM killer on kernel fault OOM

2014-11-21T17:22:55+00:00

commit 871341023c771ad233620b7a1fb3d9c7031c4e5c upstream. Kernel faults are expected to handle OOM conditions gracefully (gup, uaccess etc.), so they should never invoke the OOM killer. Reserve this for faults triggered in user context when it is the only option. Most architectures already do this, fix up the remaining few. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Acked-by: KOSAKI Motohiro Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman

arch: mm: remove obsolete init OOM protection

2014-11-21T17:22:55+00:00

commit 94bce453c78996cc4373d5da6cfabe07fcc6d9f9 upstream. The memcg code can trap tasks in the context of the failing allocation until an OOM situation is resolved. They can hold all kinds of locks (fs, mm) at this point, which makes it prone to deadlocking. This series converts memcg OOM handling into a two step process that is started in the charge context, but any waiting is done after the fault stack is fully unwound. Patches 1-4 prepare architecture handlers to support the new memcg requirements, but in doing so they also remove old cruft and unify out-of-memory behavior across architectures. Patch 5 disables the memcg OOM handling for syscalls, readahead, kernel faults, because they can gracefully unwind the stack with -ENOMEM. OOM handling is restricted to user triggered faults that have no other option. Patch 6 reworks memcg's hierarchical OOM locking to make it a little more obvious wth is going on in there: reduce locked regions, rename locking functions, reorder and document. Patch 7 implements the two-part OOM handling such that tasks are never trapped with the full charge stack in an OOM situation. This patch: Back before smart OOM killing, when faulting tasks were killed directly on allocation failures, the arch-specific fault handlers needed special protection for the init process. Now that all fault handlers call into the generic OOM killer (see commit 609838cfed97: "mm: invoke oom-killer from remaining unconverted page fault handlers"), which already provides init protection, the arch-specific leftovers can be removed. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Acked-by: KOSAKI Motohiro Cc: David Rientjes Cc: KAMEZAWA Hiroyuki Cc: azurIt Acked-by: Vineet Gupta [arch/arc bits] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman

mm: invoke oom-killer from remaining unconverted page fault handlers

2014-11-21T17:22:55+00:00

commit 609838cfed972d49a65aac7923a9ff5cbe482e30 upstream. A few remaining architectures directly kill the page faulting task in an out of memory situation. This is usually not a good idea since that task might not even use a significant amount of memory and so may not be the optimal victim to resolve the situation. Since 2.6.29's 1c0fe6e ("mm: invoke oom-killer from page fault") there is a hook that architecture page fault handlers are supposed to call to invoke the OOM killer and let it pick the right task to kill. Convert the remaining architectures over to this hook. To have the previous behavior of simply taking out the faulting task the vm.oom_kill_allocating_task sysctl can be set to 1. Signed-off-by: Johannes Weiner Reviewed-by: Michal Hocko Cc: KAMEZAWA Hiroyuki Acked-by: David Rientjes Acked-by: Vineet Gupta [arch/arc bits] Cc: James Hogan Cc: David Howells Cc: Jonas Bonn Cc: Chen Liqin Cc: Lennox Wu Cc: Chris Metcalf Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Cong Wang Signed-off-by: Greg Kroah-Hartman