kernel/linux.git, branch v3.0.89

Linux 3.0.89

2013-08-04T07:45:13+00:00

USB: storage: Add MicroVault Flash Drive to unusual_devs

2013-08-04T07:45:00+00:00

commit e7a6121f4929c17215f0cdca3726f4bf3e4e9529 upstream. The device report an error capacity when read_capacity_16(). Using read_capacity_10() can get the correct capacity. Signed-off-by: Ren Bigcren Cc: Matthew Dharm Signed-off-by: Oskar Andero Signed-off-by: Greg Kroah-Hartman

mm/memory-hotplug: fix lowmem count overflow when offline pages

2013-08-04T07:43:42+00:00

commit cea27eb2a202959783f81254c48c250ddd80e129 upstream. The logic for the memory-remove code fails to correctly account the Total High Memory when a memory block which contains High Memory is offlined as shown in the example below. The following patch fixes it. Before logic memory remove: MemTotal: 7603740 kB MemFree: 6329612 kB Buffers: 94352 kB Cached: 872008 kB SwapCached: 0 kB Active: 626932 kB Inactive: 519216 kB Active(anon): 180776 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296272 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5704696 kB LowTotal: 309068 kB LowFree: 624916 kB After logic memory remove: MemTotal: 7079452 kB MemFree: 5805976 kB Buffers: 94372 kB Cached: 872000 kB SwapCached: 0 kB Active: 626936 kB Inactive: 519236 kB Active(anon): 180780 kB Inactive(anon): 222944 kB Active(file): 446156 kB Inactive(file): 296292 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 7294672 kB HighFree: 5181024 kB LowTotal: 4294752076 kB LowFree: 624952 kB [mhocko@suse.cz: fix CONFIG_HIGHMEM=n build] Signed-off-by: Wanpeng Li Reviewed-by: Michal Hocko Cc: KAMEZAWA Hiroyuki Cc: David Rientjes Cc: [2.6.24+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Zhouping Liu Signed-off-by: Greg Kroah-Hartman

virtio_net: fix race in RX VQ processing

2013-08-04T07:43:40+00:00

commit cbdadbbf0c790f79350a8f36029208944c5487d0 upstream virtio net called virtqueue_enable_cq on RX path after napi_complete, so with NAPI_STATE_SCHED clear - outside the implicit napi lock. This violates the requirement to synchronize virtqueue_enable_cq wrt virtqueue_add_buf. In particular, used event can move backwards, causing us to lose interrupts. In a debug build, this can trigger panic within START_USE. Jason Wang reports that he can trigger the races artificially, by adding udelay() in virtqueue_enable_cb() after virtio_mb(). However, we must call napi_complete to clear NAPI_STATE_SCHED before polling the virtqueue for used buffers, otherwise napi_schedule_prep in a callback will fail, causing us to lose RX events. To fix, call virtqueue_enable_cb_prepare with NAPI_STATE_SCHED set (under napi lock), later call virtqueue_poll with NAPI_STATE_SCHED clear (outside the lock). Reported-by: Jason Wang Tested-by: Jason Wang Acked-by: Jason Wang Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller [wg: Backported to 3.2] Signed-off-by: Wolfram Gloger Signed-off-by: Greg Kroah-Hartman

virtio: support unlocked queue poll

2013-08-04T07:43:40+00:00

commit cc229884d3f77ec3b1240e467e0236c3e0647c0c upstream. This adds a way to check ring empty state after enable_cb outside any locks. Will be used by virtio_net. Note: there's room for more optimization: caller is likely to have a memory barrier already, which means we might be able to get rid of a barrier here. Deferring this optimization until we do some benchmarking. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller [wg: Backported to 3.2] Signed-off-by: Wolfram Gloger Signed-off-by: Greg Kroah-Hartman

xen/evtchn: avoid a deadlock when unbinding an event channel

2013-08-04T07:43:40+00:00

commit 179fbd5a45f0d4034cc6fd37b8d367a3b79663c4 upstream. Unbinding an event channel (either with the ioctl or when the evtchn device is closed) may deadlock because disable_irq() is called with port_user_lock held which is also locked by the interrupt handler. Think of the IOCTL_EVTCHN_UNBIND is being serviced, the routine has just taken the lock, and an interrupt happens. The evtchn_interrupt is invoked, tries to take the lock and spins forever. A quick glance at the code shows that the spinlock is a local IRQ variant. Unfortunately that does not help as "disable_irq() waits for the interrupt handler on all CPUs to stop running. If the irq occurs on another VCPU, it tries to take port_user_lock and can't because the unbind ioctl is holding it." (from David). Hence we cannot depend on the said spinlock to protect us. We could make it a system wide IRQ disable spinlock but there is a better way. We can piggyback on the fact that the existence of the spinlock is to make get_port_user() checks be up-to-date. And we can alter those checks to not depend on the spin lock (as it's protected by u->bind_mutex in the ioctl) and can remove the unnecessary locking (this is IOCTL_EVTCHN_UNBIND) path. In the interrupt handler we cannot use the mutex, but we do not need it. "The unbind disables the irq before making the port user stale, so when you clear it you are guaranteed that the interrupt handler that might use that port cannot be running." (from David). Hence this patch removes the spinlock usage on the teardown path and piggybacks on disable_irq happening before we muck with the get_port_user() data. This ensures that the interrupt handler will never run on stale data. Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk [v1: Expanded the commit description a bit] Signed-off-by: Jonghwan Choi Signed-off-by: Greg Kroah-Hartman

livelock avoidance in sget()

2013-08-04T07:43:40+00:00

commit acfec9a5a892f98461f52ed5770de99a3e571ae2 upstream. Eric Sandeen has found a nasty livelock in sget() - take a mount(2) about to fail. The superblock is on ->fs_supers, ->s_umount is held exclusive, ->s_active is 1. Along comes two more processes, trying to mount the same thing; sget() in each is picking that superblock, bumping ->s_count and trying to grab ->s_umount. ->s_active is 3 now. Original mount(2) finally gets to deactivate_locked_super() on failure; ->s_active is 2, superblock is still ->fs_supers because shutdown will *not* happen until ->s_active hits 0. ->s_umount is dropped and now we have two processes chasing each other: s_active = 2, A acquired ->s_umount, B blocked A sees that the damn thing is stillborn, does deactivate_locked_super() s_active = 1, A drops ->s_umount, B gets it A restarts the search and finds the same superblock. And bumps it ->s_active. s_active = 2, B holds ->s_umount, A blocked on trying to get it ... and we are in the earlier situation with A and B switched places. The root cause, of course, is that ->s_active should not grow until we'd got MS_BORN. Then failing ->mount() will have deactivate_locked_super() shut the damn thing down. Fortunately, it's easy to do - the key point is that grab_super() is called only for superblocks currently on ->fs_supers, so it can bump ->s_count and grab ->s_umount first, then check MS_BORN and bump ->s_active; we must never increment ->s_count for superblocks past ->kill_sb(), but grab_super() is never called for those. The bug is pretty old; we would've caught it by now, if not for accidental exclusion between sget() for block filesystems; the things like cgroup or e.g. mtd-based filesystems don't have anything of that sort, so they get bitten. The right way to deal with that is obviously to fix sget()... Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: add more RT Systems ftdi devices

2013-08-04T07:43:40+00:00

commit fed1f1ed90bce42ea010e2904cbc04e7b8304940 upstream. RT Systems makes many usb serial cables based on the ftdi_sio driver for programming various amateur radios. This patch is a full listing of their current product offerings and should allow these cables to all be recognized. Signed-off-by: Rick Farina (Zero_Chaos) Signed-off-by: Greg Kroah-Hartman

drm/radeon/atom: initialize more atom interpretor elements to 0

2013-08-04T07:43:39+00:00

commit 42a21826dc54583cdb79cc8477732e911ac9c376 upstream. The ProcessAuxChannel table on some rv635 boards assumes the divmul members are initialized to 0 otherwise we get an invalid fb offset since it has a bad mask set when setting the fb base. While here initialize all the atom interpretor elements to 0. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=60639 Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman

drm/radeon: improve dac adjust heuristics for legacy pdac

2013-08-04T07:43:38+00:00

commit 03ed8cf9b28d886c64c7e705c7bb1a365fd8fb95 upstream. Hopefully avoid more quirks in the future due to bogus vbios dac data. Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman