# Introduction These instructions explain how to get an edk2/edk2-platforms build running on the Arm Base FVP and a Juno. The Arm Base FVP is a software model provided by ARM (for free) , which models a Cortex A core with various peripherals. More information can be found [here](https://developer.arm.com/products/system-design/fixed-virtual-platforms). ## Build environment setup on Linux or Windows ### Initial steps The first step towards building an EDKII firmware image is to create a working directory. 1. Launch a terminal window. 2. Create a directory on your development machine (we willl name it 'source' in this example). 3. Set the WORKSPACE environment variable to point to this directory. #### Example: In a Linux bash shell: ``` cd mkdir source cd source export WORKSPACE=$PWD ``` OR In a Windows command prompt: ``` cd mkdir source cd source set WORKSPACE=%CD% ``` ### Cloning the source code repositories Note: To clone the repositories you need 'git' to be installed on your development PC (see Development Tools). In the terminal window, change directory to your workspace ('source') folder and run the following commands. Install Git if necessary. ``` git clone https://github.com/tianocore/edk2.git git clone https://github.com/tianocore/edk2-platforms.git git clone https://github.com/acpica/acpica.git ``` Then go to the edk2 folder and update the submodules. ``` cd edk2 git submodule update --init cd .. ``` # Building firmware on a Linux host ## Prerequisites - A 64-bit development machine. - Ubuntu 20.04 desktop. - At least 10GB of free disk space. Check the Ubuntu version by typing the following in the terminal window. ``` $ uname -srvmpio Linux 5.4.0-131-generic #147-Ubuntu SMP Fri Oct 14 17:07:22 UTC 2022 x86_64 x86_64 x86_64 GNU/Linux ``` ### Development Tools The following tools must be installed on the development PC. | Sr. No. | Tool | Description | Install instructions | |-----------|---------------------|--------------------------------------------------------------|----------------------------------------------------------| | 1 | Python 3 | Python interpreter | $ sudo apt install python3 python3-distutils | | 2 | Git | Git source control tool | $ sudo apt install git | | 3 | uuid-dev | Required for including uuid/uuid.h | $ sudo apt install uuid-dev | | 4 | build-essential | Installs make, gcc, g++, etc | $ sudo apt install build-essential
$ make -v
GNU Make 4.2.1
gcc --version
gcc (Ubuntu 9.4.0-1ubuntu1~20.04.1) 9.4.0
$ g++ --version
g++ (Ubuntu 9.4.0-1ubuntu1\~20.04.1) 9.4.0 | | 5 | bison | A parser generator required by acpica tools. | $ sudo apt install bison | | 6 | flex | A fast lexical analyzer generator required by acpica tools | $ sudp apt get install flex | ### Setting up the development tools Install the required development tools by running the following commands in the terminal window. ``` $ sudo apt install bison build-essential flex git uuid-dev ``` ``` $ sudo apt install python3 python3-distutils ``` ### Arm cross compiler toolchain The Arm toolchain to cross compile from x86_64-linux to aarch64-elf is available [here](https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads). Select the latest toolchain to match the development PC architecture. Select the little-endian 'AArch64 ELF bare-metal target (aarch64-elf)' GCC cross compiler. Example: For a x86_64 development PC, download arm-gnu-toolchain-12.2.rel1-x86_64-aarch64-none-elf.tar.xz Create a directory called 'toolchain' under the workspace folder. For example source\toolchain and extract the toolchain to this directory. ``` $ mkdir $WORKSPACE/toolchain $ cd $WORKSPACE/toolchain $ wget https://armkeil.blob.core.windows.net/developer/Files/downloads/gnu/12.2.rel1/binrel/arm-gnu-toolchain-12.2.rel1-x86_64-aarch64-none-elf.tar.xz $ tar xf arm-gnu-toolchain-12.2.rel1-x86_64-aarch64-none-elf.tar.xz $ cd $WORKSPACE ``` ### Build the acpica tools The acpica tools implement the latest iasl compiler. To build the acpica tools, run the following commands in the terminal window. ``` $ make -C $WORKSPACE/acpica ``` ## Building EDKII firmware 1. To build the firmware image, follow the steps below and run the commands in the terminal window. 2. Set up the environment variables. ``` $ export GCC5_AARCH64_PREFIX=$WORKSPACE/toolchain/arm-gnu-toolchain-12.2.rel1-x86_64-aarch64-none-elf/bin/aarch64-none-elf- $ export PACKAGES_PATH=$WORKSPACE/edk2:$WORKSPACE/edk2-platforms $ export IASL_PREFIX=$WORKSPACE/acpica/generate/unix/bin/ $ export PYTHON_COMMAND=/usr/bin/python3 ``` 3. Configure the EDKII development environment by running the edk2setup bash script. ``` $ source edk2/edksetup.sh ``` 4. Build the BaseTools. ``` $ make -C edk2/BaseTools ``` ### Build the firmware for Arm FVP Base Model platform Run the following command to build the firmware for FVP Base platform. ``` $ build -a AARCH64 -t GCC5 -p Platform/ARM/VExpressPkg/ArmVExpress-FVP-AArch64.dsc -b < DEBUG | RELEASE > ``` The firmware binaries can be found at the following location: ``` $WORKSPACE/Build/ArmVExpress-FVP-AArch64/_GCC5/FV/FVP_AARCH64_EFI.fd ``` Note: The same firmware binary can be used with Arm FVP Base AEMvA-AEMvA and Armv-A Base RevC AEM FVP models. ### Build the firmware for Arm Juno platform Run the following command to build the firmware for Arm Juno platform. ``` $ build -a AARCH64 -t GCC5 -p Platform/ARM/JunoPkg/ArmJuno.dsc -b < DEBUG | RELEASE > ``` The firmware binaries can be found at the following location: ``` $WORKSPACE/Build/ArmJuno/_GCC5/FV/BL33_AP_UEFI.fd ``` # Building firmware on a Windows host using Windows Subsystem for Linux (WSL) The instructions for building the firmware using WSL are similar to that for a Linux host. The prerequisites for setting up the Windows Subsystem for Linux environment are listed below. ## Prerequisites - A x64 development machine with Windows 10 (Version 21H2 - OS Build 19044.2486). - At least 10GB of free disk space. - Install the Windows Subsystem for Linux. Select Ubuntu 20.04 LTS from the Microsoft Store. Check the Ubuntu version by typing the following on the console. ``` $ uname -srvmpio Linux 4.4.0-19041-Microsoft #2311-Microsoft Tue Nov 08 17:09:00 PST 2022 x86_64 x86_64 x86_64 GNU/Linux ``` The remaining instructions for installing the development tools, configuring the development environment and building firmware are exactly the same as those for a Linux host. # Building firmware on a x64 Windows host #### Prerequisites - A 64-bit development machine - Windows 10 desktop (Version 21H2 - OS Build 19044.2486) - At least 10GB of free disk space. #### Development Tools The following tools must be installed on the development machine. | Sr. No. | Tool | Description | Install instructions | |-----------|----------------------------------------------|--------------------------------------------------------------|----------------------------------------------------------| | 1 | Python 3 | Python interpreter | Go [here](https://www.python.org/downloads/windows/)

Choose the latest Python 3.X release.

Download and run the Windows x86_64 MSI installer

If needed, add the python executable to your path by executing the following command:
> set PATH=;%PATH% | | 2 | Git | Git source control tool | Go [here](https://git-scm.com/download/win)

Download and run the 64-bit Git for Windows Setup | | 3 | ASL tools | iasl compiler and other tools for the ASL language | Go [here](https://www.acpica.org/downloads/binary-tools)

Download the iASL Compiler and Windows ACPI Tools

Extract the content and place it at C:\ASL\

Check that the compiler is at the right place by executing:
> C:\ASL\iasl.exe -v | | 4 | Microsoft Visual Studio 2019 Professional | Microsoft IDE and compiler toolchain. | Go [here](https://visualstudio.microsoft.com/downloads/)

Download and install Visual Studio 2019 Professional | | 5 | echo tool | Echo | See Workaround for echo command below. | ## Setting up the development tools Install the required development tools listed above by running the appropriate installer applications. ### Arm cross compiler toolchain The Arm toolchain Windows (i686-mingw32) hosted cross compilers are available [here](https://developer.arm.com/downloads/-/arm-gnu-toolchain-downloads). Select the latest toolchain for 'AArch64 bare-metal target (aarch64-none-elf)' GCC cross compiler. Example: Download arm-gnu-toolchain-12.2.rel1-mingw-w64-i686-aarch64-none-elf Create a directory called 'toolchain' under the workspace directory and extract the toolchain to this directory using the downloaded installer. The toolchain folder tree should look as below: ``` toolchain +---arm-gnu-toolchain-12.2.rel1-mingw-w64-i686-aarch64-none-elf | +---aarch64-none-elf | +---bin | +---include | +---lib | +---libexec | +---share ``` ### Workaround for the echo command EDKII needs a workaround related to the echo command. A script replacing the Windows echo executable must be created, with the name "echo.BAT?: - Create a file named "echo.BAT" in the folder of your choice. - Paste the following lines inside the file: ``` rem %~f0 echo.BAT %* rem This file exists to overcome a problem in the EDKII build where rem build_rule.template invokes a command as: rem "$(OBJCOPY)" $(OBJCOPY_FLAGS) ${dst} rem When OBJCOPY is set to echo, this results in the following error: rem "echo" objcopy not needed for m:\...\PCD\Dxe\Pcd\DEBUG\PcdDxe.dll rem And CMD.EXE fails to find the DOS echo command because of the quotes @echo %* @goto :EOF ``` - Add the file to your PATH by executing: ``` > set PATH=;%PATH% ``` ## Building EDKII firmware 1. To build the firmware image, follow the steps below and run the commands in the terminal window. 2. Set up the environment variables. ``` set GCC5_AARCH64_PREFIX=%WORKSPACE%\toolchain\arm-gnu-toolchain-12.2.rel1-mingw-w64-i686-aarch64-none-elf\bin\aarch64-none-elf- set PACKAGES_PATH=%WORKSPACE%\edk2;%WORKSPACE%\edk2-platforms set EDK_TOOLS_PATH=%WORKSPACE%\edk2\BaseTools set GCC_HOST_BIN=n ``` Select the python version you wish to use and set the PYTHON_COMMAND environment variable to your Python executable. Set the PYTHON_COMMAND to point to the Python3 executable. Check that your path is set up as it is stated in the development tools table above. It should give access to: - The make executable - The echo.BAT script 3. Configure the EDKII development environment by running the edksetup.bat script. The Rebuild option can be skipped if the BaseTools have already been built. The ForceRebuild option can be used to do a clean build of the Base tools. ``` > call %WORKSPACE%\edk2\edksetup.bat [Rebuild | ForceRebuild] ``` ### Build the firmware for Arm FVP Base Model platform Run the following command to build the firmware for FVP Base platform. ``` > build -a AARCH64 -t GCC5 -p Platform\ARM\VExpressPkg\ArmVExpress-FVP-AArch64.dsc -b < DEBUG | RELEASE > ``` The firmware binaries can be found at the following location: ``` %WORKSPACE%\Build\ArmVExpress-FVP-AArch64\_GCC5\FV\FVP_AARCH64_EFI.fd ``` Note: The same firmware binary can be used with Arm FVP Base AEMvA-AEMvA and Armv-A Base RevC AEM FVP models. ### Build the firmware for Arm Juno platform Run the following command to build the firmware for Arm Juno platform. ``` > build -a AARCH64 -t GCC5 -p Platform\ARM\JunoPkg\ArmJuno.dsc -b < DEBUG | RELEASE > ``` The firmware binaries are at the following location: ``` %WORKSPACE%\Build\ArmJuno\_GCC5\FV\BL33_AP_UEFI.fd ```