summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-08-03meta-ibm: Use gpioset in reset-fan-watchdogMatt Spinler5-5/+2
The reset-fan-watchdog service needs to toggle a GPIO in order to unlock the fan watchdog circuit so fans can be controlled after the watchdog has expired and locked them at high speed. This gets called on every power on to bring the fans under control again in case the watchdog had expired on the previous boot. This was done previously using a custom application which used libgpiod under the covers, which was written before gpioset was around. Now that gpioset is available, just use it instead to toggle the GPIO so there's less custom code we have to worry about maintaining. The actual minimum timing requirement of the toggle is around 5ns, so the 1us being used by all the config files meets that. Tested: Expired the watchdog by stopping the fan-watchdog service, then powered off and back on and made sure the fans can still be controlled. Signed-off-by: Matt Spinler <spinler@us.ibm.com> Change-Id: Ibd36ff17e83b57d521364f0092dfa1f5abf34856
2023-08-03meta-ibm/genesis3: Assign MAC from board EEPROMPatrick Rudolph7-0/+107
Add phosphor-ipmi-fru and ipmi-fru-properties configurations to parse the MAC address from board IPMI EEPROM. Add config for phosphor-network to sync MAC to u-boot env. Change-Id: I76c294f8822da11da2fedef5fdd842ce6d10efd0 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2023-08-03meta-ibm/genesis3: enable phosphor-pid-controlPatrick Rudolph1-0/+5
Enable the fan control PID loop. It depends on the D-Bus configuration posted here: https://gerrit.openbmc.org/c/openbmc/entity-manager/+/58421 Change-Id: I32979f5705a745dcf0abdab5cce9d62340c33fbf Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2023-08-03meta-ibm/genesis3: Configure dbus-sensorsPatrick Rudolph1-0/+6
Change-Id: I5be5a644de26648d194b66ae70148201b4dafd58 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2023-08-03meta-ibm/genesis3: Add LEDsPatrick Rudolph3-0/+397
Change-Id: Ic6a5bc3547e6416897a2a27eb59c0484a9abf67e Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2023-08-03meta-ibm/genesis3: Add inventoryPatrick Rudolph2-0/+1959
Change-Id: Iffad7afabba59e0c50d2d7151847f166f9af0b9d Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2023-08-03meta-ibm: systemd-networkd-wait-online overridePatrick Rudolph2-0/+12
IBM systems do not always configure both eth0 and eth1 ports. This causes this service to fail and hold up the boot of the BMC by the 2 minute timeout. Override this service file to have IBM systems only wait for eth0 OR eth1 to become active. The Genesis3 BMC has two NICs. Be happy with a link up on one of them. TEST=Build for Genesis3 & make sure with waits for either of the two NIC to be active. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Change-Id: I0ffd652fabd5e998b14e23621d89046a9eed5455 Signed-off-by: Andrew Geissler <geissonator@yahoo.com>
2023-08-03meta-phosphor: led-sysfs: Depend on CLI11George Liu1-0/+1
The argument class will be removed in the future and CLI11 will be used instead[1]. [1]: https://gerrit.openbmc.org/c/openbmc/phosphor-led-sysfs/+/65711 Signed-off-by: George Liu <liuxiwei@inspur.com> Change-Id: I5fc34324e2139d31b0a338a9f2075ca865b4ff41
2023-08-02Move libpeci to mesonEd Tanous1-2/+2
Signed-off-by: Ed Tanous <edtanous@google.com> Change-Id: Ib980d63ad96aa235990ea060fbab37ae4049f66f
2023-08-02libpeci: srcrev bump b33f593d97..0bff6858afAndrew Geissler1-1/+1
Ed Tanous (1): Port to meson Jason M. Bills (1): Fix build warning Change-Id: I7619ac24615208d47f6b2f9e516fb3a526cae53b Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02meta-google: networking: Prevent redundant dhcp reconfig during installationYuxiao Zhang1-0/+1
We have seen that smartnic workaround is running after dhcp done. If we see dhcp-done service running, no need to restart dhcp. Change-Id: I83ad8bc376f6727ec98a4ce4b2e545d00a2b9c82 Signed-off-by: Yuxiao Zhang <yuxiaozhang@google.com>
2023-08-02meta-phosphor: logging: use minimum ERR_INFO_CAP if FLASH_SIZE is undefinedJason M. Bills1-1/+1
In case FLASH_SIZE is undefined, default to the minimum value of ERR_INFO_CAP instead of failing the build. Tested: With FLASH_SIZE undefined, confirmed that the build succeeds and ERR_INFO_CAP is set to the minimum value of "10". Signed-off-by: Jason M. Bills <jason.m.bills@linux.intel.com> Change-Id: I03942ffcb3d238f5231c312e418b4f35079da6b6
2023-08-02meta-facebook: greatlakes: kernel: disable COMPILE_TESTPatrick Williams1-1/+0
This kernel config is not intended to be set on production kernels and has side-effects of enabling non-mainline compiles, which aren't always supported with the typical compilers. Right now this enables a RANDSTRUCT gcc-plugin that doesn't compile with GCC-13. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: I47947aec4de54e11b6b5afccb6607b8c14d6cc95
2023-08-02meta-nuvoton: npcm7xx-igps: update to 02.01.18Tim Lee2-4/+4
Changelog: IGPS 02.01.18 - Jul 27th 2023 ============== - BootBlock 10.10.18 Date: 24.07.24 ================== =============== Add support for baud rate setting supported baud rates 115200, 460800 - Support BAUD Rate configuration (115200, 460800) - XML: Add baud rate setting to BootblockAndHeader.XML Default value is 115200. Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: I93d6b37fdf1d4662cfe84b11dd73d7aa3d24aaf6
2023-08-02meta-nuvoton: npcm8xx-igps: update to 03.09.02Tim Lee5-8/+8
Changelog: IGPS 03.09.02 - Jul 24th 2023 ============== - bootblock 0.3.5 https://github.com/Nuvoton-Israel/npcm8xx-bootblock/ releases/tag/A35_BootBlock_0.3.5 * bug fix: support NO_TIP mode + updated memory map. all images are loaded to DRAM. (from version bootblock 0.3.4) * Call CLK_ConfigureFIUClock only in PORST (update SPI dividers from header). * re-enable HOST_IF field in header. Supported values: 0xFF: do nothing 0x00: LPC. 0x01: eSPI 0x02: GPIOs TRIS. 0x03: release host wait, disable eSPI configuration is done only in PORST. - add baud rate field to header: * Supported values: 9600,14400,19200,38400,57600,115200,230400, 380400,460800,921600. Default is 115200. - Update README with signing options. - Support pkcs11-tool on Linux. - Bingo 0.0.6. https://github.com/Nuvoton-Israel/bingo/releases/tag/Bingo_0.0.6 - update Monitor 1.0.9 (contact Nuvoton for internal users only) - Optee npcm845x_3.22.0-rc1-7: https://github.com/Nuvoton-Israel/optee_os/releases/tag/3.22.0-rc1-7 * change load address of OPTEE-OS from 0x36000000 to 0x02100000 * added HUK reading from TIP Mailbox DME PCR0 - TIP_FW 0.6.1 L0 0.5.0 L1: * Update RCR regs whenever PORST bit is set in TIP_SCR1 (ignore all other bits) * Export PCI parameters on any reset, re-order the parameter locations. * Fix typos un uptime and similar. * SWRST4 is TIP_RESET. ##uboot https://github.com/Nuvoton-Israel/u-boot/ releases/tag/v2021.04-npcm8xx-20230724 * u-boot.bin is built with extra config to skip UART initialization in u-boot (CONFIG_SYS_SKIP_UART_INIT=y) - Update bootblock XML: * Add host IF field. eSPI in all flavors except Google XML. * Add BAUD rate field. default is 115200. Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: Ib9d19566ef42d4bbcc3c15df599e396b25e2eede
2023-08-02pldm: srcrev bump 3586d360fc..fc81a437ddAndrew Geissler1-1/+1
Manojkiran Eda (1): use fs.copyfile instead of deprecated copy Change-Id: I1371d43e21a5a4201dcfcb9dde83577addd22be8 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02btbridge: srcrev bump 87a0efd5f5..4aa8373959Andrew Geissler1-1/+1
Andrew Geissler (1): time: changes to support 64bit time Change-Id: I5b88b32c299ea07015d1c0aed57f4126bdc1d8d4 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02dbus-sensors: srcrev bump 2d5ee50bb2..63c9122ea5Andrew Geissler1-1/+1
Willy Tu (1): ipmbsensor: remove debug log Change-Id: I2656a5afa5da759e3743488a25118177decc923b Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02entity-manager: srcrev bump 7329a22510..f60262d50bAndrew Geissler1-1/+1
Alexander Hansen (1): configurations: add GOSPOWER G1136-1300WNA PSU Change-Id: I4ca72cc3e5d404a52b21c6d27f327538843769f2 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02phosphor-user-manager: srcrev bump 5c028e17a7..ac921a5e34Andrew Geissler1-1/+1
Jayanth Othayoth (1): Add support for deleting authentication failure record files Change-Id: I48940ae1021641aeeedf6459fe0843328a6ab97f Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02libpldm: srcrev bump ef48506891..f3e0a2da46Andrew Geissler1-1/+1
Andrew Jeffery (1): msgbuf: Remove duplicate fixup of _Static_assert() for C++ Thu Nguyen (1): transport: free un-wanted responses in pldm_transport_send_recv_msg() Change-Id: Ic83517773a9cac6235ab85f525e01a0763b60d63 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02smbios-mdr: srcrev bump 226357e8cd..a1ff2445cbAndrew Geissler1-1/+1
Jayaprakash Mutyala (1): Populate Memory attributes Change-Id: I41710fb4888e55d45bcb23f05f50bfea6b33528a Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02bmcweb: srcrev bump 8ed41c35a3..59ba63885eAndrew Geissler1-1/+1
Ed Tanous (1): Refactor login/logout Gunnar Mills (1): Revert "Cache user role in session object" Lukasz Kazmierczak (1): Add PATCH for MetricReportDefinition Patrick Williams (1): sdbusplus: use shorter type aliases Change-Id: I7026e3844745d3d628d8437b1cb5771322500cc6 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-02phosphor-net-ipmid: srcrev bump 11c483510b..de4121c738Andrew Geissler1-1/+1
Tang Yiwei (1): Add privilege check in activate payload Change-Id: Ia92c7b7276e1055253e957f195fbc75fbb0f0aa2 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-08-01meta-ibm:sensors:p10bmc: Modify ACBEL READ_VOUT labelFaisal Awada2-4/+4
Modify ACBEL PSU configuration file to read output voltage from sysfs in2_label and to read the output current from curr2_label. Testing: Placed the modified config file in /etc//default/obmc/hwmon/ahb/apb/bus@1e78a000/i2c-bus@200/power-supply@5a.conf then verified the output voltage and current output shows up on the BMC sensors web page and redfish. Change-Id: Iacf1469295b99f6a7363d26983786f9c7ed8826a Signed-off-by: Faisal Awada <faisal@us.ibm.com>
2023-08-01meta-ibm: Add sysctl configuration for networkRavi Teja2-0/+7
Currently same subnet IPv4 configuration on both ethernet interfaces does not work. This commit sets kernel ARP settings which allow same subnet routes on both ethernet interfaces at the same time. Tested by: Configure same subnet IP addresses on both interfaces and network configuration works Change-Id: I01962b8bf066ccf7006915e77f07287b6e5544d4 Signed-off-by: Ravi Teja <raviteja28031990@gmail.com>
2023-08-01meta-fii: meta-kudo: Bypass mandatory power_on led groupJonico Eustaquio1-0/+1
By setting CHASSIS_TARGETS = "", obmc-chassis-poweron/off@0.target will not have a dependency on obmc-led-groups-start/stop@power_on.service. This keeps us from having to add the led.yaml file for phosphor-led-manager since we do not require obmc-led-groups-start/stop@power_on.service to activate. Signed-off-by: Jonico Eustaquio <jonico.eustaquio@fii-na.com> Change-Id: I8e9581b067cf2a5589da9dc18a6a140c40130c63
2023-07-31meta-google: kdump-ramoops: moving to private repoYuxiao Zhang2-12/+1
Move gbmc ramoops collector into private repo. This is to reduce the customized systemd script in public openbmc. Change-Id: I9e8861fc2261852eb86b9b222749cb340ac66dad Signed-off-by: Yuxiao Zhang <yuxiaozhang@google.com>
2023-07-31openpower-vpd-parser: srcrev bump d8577739a7..4170bdad54Andrew Geissler1-1/+1
Priyanga Ramasamy (1): Unable to set minimum ship level jinuthomas (1): Catching File Exceptions in openpower-vpd-parser Change-Id: I90533ae5df1aa936cf7fa9371c0892d3976d07a6 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-31meta-ampere: bmcweb: replace deprecated schemas with new schemasThang Tran1-0/+2
In the Redfish Data Model Specification, it deprecated Power and Thermal schemas from v1.7 version (release on 2020.4). It used PowerSubsystem and ThermalSubsystem instead. This commit replaces deprecated Power/Thermal schemas with PowerSubsystem/ThermalSubsystem schemas. Tested: 1. The /redfish/v1/Chassis/<ChassisId>/<Power | Thermal> schemas have been removed. 2. The /redfish/v1/Chassis/<ChassisId>/<PowerSubsystem | ThermalSubsystem> schemas have been added. Change-Id: I4868cde726c07f68fc94986d9659fc9377bdaf5e Signed-off-by: Thang Tran <thuutran@amperecomputing.com>
2023-07-29meta-ampere: mtmitchell: support Host Secure Provisioning procedureHieu Huynh1-2/+38
BMC shall assert SPECIAL_BOOT GPIO to the CPU to trigger Host Secure Provision. Then BMC shall reset the system, or turn on the system if it is being OFF. After the host enters Provisioning Boot Mode successfully (or having failure), BMC shall deassert the SPECIAL_BOOT GPIO to LOW. Tested: 1. Flash HostFW with PASS case. - $ ampere_flash_bios.sh spinor.img 1 1 - Host boot with logs: [00:00:00.248,000] <inf> scu_stat: is_special_boot() = 1 [00:00:00.383,000] <inf> SECpro_cert_ext: Assert FW_BOOT_OK [00:00:00.383,000] <inf> SECpro_cert_ext: Deassert FAULT_ALERT [00:00:00.383,000] <inf> SECpro_cert_ext: SEC provision completed \ successfully 2. Flash HostFW with FAULT case. - $ ampere_flash_bios.sh spinor_fault.img 1 1 - Host boot with logs: [00:00:00.253,000] <inf> scu_stat: is_special_boot() = 1 [00:00:00.388,000] <err> SECpro_cert_ext: Invalid version cert 0.0 [00:00:00.388,000] <inf> SECpro_cert_ext: Assert FW_BOOT_OK [00:00:00.388,000] <err> SECpro_cert_ext: SEC provision failed [00:00:00.388,000] <err> SECpro_cert_ext: Sending error on \ FAULT_ALERT 3. Turn off the Host, flash HostFW with PASS case. After flash done, Host boot with logs is the same with step #1. Signed-off-by: Hieu Huynh <hieuh@os.amperecomputing.com> Change-Id: I546c7ffd80474edf6165e67f1b96eacbedcd0939
2023-07-29meta-google: Add /var/log/state to whitelistWilly Tu1-0/+1
Allow the state file for rsyslog as configured by the default rsyslog.conf. This prevent us from reading the the whole logs again (if the logs persists across reboots). Reference: - https://gerrit.openbmc.org/c/openbmc/openbmc/+/64418 Change-Id: Ia3650627a26e2dbdcc62f1c464e389e4e668e3a8 Signed-off-by: Willy Tu <wltu@google.com>
2023-07-28phosphor-logging: srcrev bump 1cb59f70f1..230f9f94b8Andrew Geissler1-1/+1
Josh Lehan (1): lg2: Add mutex to avoid stderr line corruption Change-Id: I3c17a3566f68fb1bccf9d32a40de02f1a0aa2693 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28smbios-mdr: srcrev bump 6106d54a7a..226357e8cdAndrew Geissler1-1/+1
Saitwal, Meghan (1): Add GNR-D to cpuinfoapp support Change-Id: I4543bf0fe9c53dafbe56bda9cf3a2cb5cfa37fda Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28stdplus: srcrev bump 8bd9251190..e6fda45018Andrew Geissler1-1/+1
William A. Kennington III (2): print: Split out function for directly writing out strings fd: Use zstrings Change-Id: I78ca782244b90e2263e97c27d76ebf27b5faee2e Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28webui-vue: srcrev bump 6a3b7b5d65..37b22a1331Andrew Geissler1-1/+1
Nikhil Ashoka (1): WebSocket tries to connect with 'console/default' instead of 'console0' Change-Id: I1cd42a7677414e2412b72ab93da1a038405a1679 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28pldm: srcrev bump b1475015b0..3586d360fcAndrew Geissler1-1/+1
Jeremy Kerr (1): tools: fw-update: allow ISO 8610 date formats Manojkiran Eda (1): bump cryptography from 3.4.7 to 39.0.1 Pavithra Barithaya (1): README: Move to "meson setup [options]" Change-Id: Ic49a6a61e9e4b73a146965ddb32837d4f679475e Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28libpldm: srcrev bump 096685b476..ef48506891Andrew Geissler1-1/+1
Andrew Jeffery (5): changlog: Fix ordering of Deprecated header under [Unreleased] transport: pldm_transport_poll(): Handle errors from ->init_pollfd() transport: pldm_transport_poll(): Adjust return value semantics libpldm: Migrate ARRAY_SIZE() to internal header transport: Introduce a transport for testing purposes Pavithra Barithaya (3): state-set: Add the enum for Operational Stress Status state platform: Uniform struct field name for FRU Record Set PDR platform: Uniform struct field name for Numeric SensorValue PDR Thu Nguyen (1): transport: Correct comparison in while loop condition Change-Id: If60d61dc1e0dab9eed05ae2b4e5bc8301d9168df Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28bmcweb: srcrev bump 1306101e16..8ed41c35a3Andrew Geissler1-1/+1
Chau Ly (1): chassis: Change intrusion sensor look up method Ed Tanous (3): Fix logging Add missing nullptr checks Cache user role in session object Gunnar Mills (1): Fix RestorePolicy map Change-Id: I3470e127e5aa693e1f3fc8f1899b9f9a5f52c078 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28phosphor-time-manager: srcrev bump 4f0dfa2c31..5f04019f48Andrew Geissler1-1/+1
Manojkiran Eda (1): Build test cases by default Change-Id: I7e206879f36ffca92b47b159bd195b2c5f566f9e Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com>
2023-07-28meta-phosphor: datetime: Disable tests for OpenBMC buildsManojkiran Eda1-0/+2
Tests are enabled by default in the repository, disabling them in the recipe so that they won't be compiled during the full image build. Change-Id: Icd00f36afbc490101a6936d4aebcc9ccf926b41d Signed-off-by: Manojkiran Eda <manojkiran.eda@gmail.com>
2023-07-28meta-ibm/genesis3: Include the meta-ibm layerPatrick Rudolph5-9/+10
Adjust meta-ibm to add support for the new machine. Change-Id: I2eb61f3d9c85c23b16f026f8f9eb4506c78e97ad Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2023-07-28meta-ampere: gpio: various fixesThang Q. Nguyen4-19/+1
Remove unused service files and add missing call for ampere-host-reboot@.service. Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com> Change-Id: If25d92343a23c313705213fba8f13446dcdb933e
2023-07-27phosphor-logging: leverage ERR_INFO_CAPPatrick Williams2-2/+2
The meta-phosphor recipe now includes a variable for setting the cap on info logs. Leverage that rather than an explicit EXTRA_OEMESON extension. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Ib0bc935691f4e1acb8fb667dffd60df8ce4d8118
2023-07-27meta-phosphor: phosphor-defaults: clean up poor line continuationsPatrick Williams1-18/+9
The phosphor-defaults.inc file has some free-standing line continuations that aren't in strings. While this might be accepted by bitbake, I don't think it is intended to be valid syntax, and the upstream vimsyntax file isn't happy about it. Clean this up by removing the continuation. Signed-off-by: Patrick Williams <patrick@stwcx.xyz> Change-Id: Iee63c7eec4f940b28d45d3b9a1d0d97d93fff2e6
2023-07-27meta-phosphor: logging: change error_info_cap according flash sizeTim Lee1-0/+13
Change the default err_info_cap length according "flash-${FLASH_SIZE}" to get more appropriate for larger flash systems about this option. Signed-off-by: Tim Lee <timlee660101@gmail.com> Change-Id: I769d24957f48552aabbd198cff1ca31b435af379
2023-07-27phosphor-ipmi-ethstats: srcrev bump 4cf2befc14..48d6b06ea5Andrew Geissler2-5/+6
Switch to meson. Patrick Williams (3): build: add basic meson config build: add meson for unit-tests build: remove autotools support William A. Kennington III (1): build: Some minor refactoring Change-Id: I3697ef580954f5423af0620df5c25e496de7e1c2 Signed-off-by: Andrew Geissler <openbmcbump-github@yahoo.com> Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
2023-07-26meta-quanta: mac-address SRCREV bump 08b87370..93756c78Willy Tu1-6/+6
Duke Du (1): Filter some probe fail fru Fran (8): Merge pull request #6 from quanta-bmc/dev_harvey_retry_get Merge pull request #7 from quanta-bmc/dev_harvey_retry_get Merge pull request #9 from quanta-bmc/dev_scron_using_cmake_and_googletest_and_find_fru_bus Merge pull request #10 from quanta-bmc/dev_scron_Update_README Merge pull request #12 from quanta-bmc/dev_scron_0204_fixed_bug_when_empty_line_in_config Merge pull request #11 from quanta-bmc/dev_scron_0107_Renamed_parameters Merge pull request #13 from quanta-bmc/dev_scron_0205_Modified_mac_address Merge pull request #16 from quanta-bmc/dev_duke_filter_multiple_same_fru_name_1001 Harvey Wu (4): add retry get fru data loop & output log only print first 256 bytes FRU data in log Merge pull request #18 from wltu/dev-cstdint Merge pull request #19 from wltu/dev-cmake-systemd-unit Scron Chang (9): Use Cmake, gtest, and add find-fru-bus.sh as well as config.txt. Add new line in the end of find-fru-bus.sh Add install config.txt and find-fru-bus.sh in CMake. Add PERMISSIONS to find-fru-bus Add new line to mac-address.cpp mac-address.hpp Update README.md. Renamed parameters Fixed mac-address gets "is empty". Improve the code efficiency and robustness. Scron-Chang (1): Merge branch 'master' into dev_scron_using_cmake_and_googletest_and_find_fru_bus Willy Tu (2): include cstdint for uint8_t cmake: Update system unit dir location to install Change-Id: I56abce1b6eca8e4a5a64a59c1949263e4eab462f Signed-off-by: Willy Tu <wltu@google.com>
2023-07-26meta-hpe: rl300-g11 add proliant support recipeCharles Kearney2-0/+51
Change-Id: I03a92e0d873dea306222b036accb931cf033e84e Signed-off-by: Charles Kearney <charles.kearney@hpe.com>
2023-07-26meta-google: ramoops: specify dmesg file nameYuxiao Zhang1-1/+1
Pmsg type will generate pmsg-, which will be used by kdump, this is to let this service not processing the core file. Change-Id: Ida4f8038a07ccea4be659cd734acc1a7d5c86e59 Signed-off-by: Yuxiao Zhang <yuxiaozhang@google.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-30 14:01:01 +0300