BMC/tmp/openbmc.git/meta-nuvoton, branch master

meta-nuvoton: u-boot-nuvoton-2023: srcrev bump cb2db59d4f...4b0a981bda

2025-09-08T00:48:04+00:00

Joseph Liu (1): github: ci: add npcm750 and npcm845 workflows Michael Chang (1): driver: pci: add nuvoton pcie rc driver Ronald Wahl (1): mmc: Fix potential timer value truncation Stanley Chu (4): pinctrl: npcm8xx: add support for setting VCD input source arm: dts: npcm8xx: add pinmux for VCD input misc: npcm_host_intf: Disable pending KCS/BPC interrupts net: designware: Fix get_timer value overflow Tim Lee (1): board: arbel_evb: refine print information messages Tested: Build pass and boot up successful Signed-off-by: Tim Lee Change-Id: I9896800a6c694f71b7b6a6250db4bf993c27d40d

meta-nuvoton: u-boot-nuvoton-2021: srcrev bump 60dde225ae...08ee9a315b

2025-09-08T00:47:41+00:00

Alexandru Gagniuc (2): image: Drop if/elseif hash selection in calculate_hash() image: Avoid erroneous double byte-swap in CRC value Joseph Liu (1): github: ci: add npcm750 and npcm845 workflows Ronald Wahl (1): mmc: Fix potential timer value truncation Stanley Chu (2): misc: npcm_host_intf: Disable pending KCS/BPC interrupts net: designware: Fix get_timer value overflow Tested: Build pass and boot up successful Signed-off-by: Tim Lee Change-Id: I601079bd24b280c6f178f830e03558185fe7d800

linux-nuvoton: Move to v6.6.104 stable release

2025-09-05T02:36:47+00:00

Apply the upstream security and bug fixes. Change-Id: I213c92477599e525e2d601308e34d365486e6b41 Signed-off-by: Andrew Jeffery

linux-nuvoton: Meta Clemente, ADM1273, ADM1281, Harma fixes

2025-09-03T07:58:16+00:00

John Erasmus Mari Geronimo (1): hwmon: (pmbus/adm1275) add adm1273 support Jose Ramon San Buenaventura (1): hwmon: (pmbus/adm1275) add adm1281 support Krzysztof Kozlowski (1): ARM: dts: aspeed: Minor whitespace cleanup Leo Wang (3): dt-bindings: arm: aspeed: add Meta Clemente board ARM: dts: aspeed: Add NCSI3 and NCSI4 pinctrl nodes ARM: dts: aspeed: clemente: add Meta Clemente BMC Peter Yin (3): ARM: dts: aspeed: harma: add power monitor support ARM: dts: aspeed: harma: revise gpio name ARM: dts: aspeed: harma: add mp5990 Rob Herring (Arm) (1): ARM: dts: aspeed: Fix/add I2C device vendor prefixes Change-Id: I5446a1d6dcad3c26e0b6ff24963dfd0ea92ef5e1 Signed-off-by: Andrew Jeffery

linux-nuvoton: Move to v6.6.103 stable release

2025-08-29T06:06:34+00:00

Apply the upstream security and bug fixes. Change-Id: Icbe0a93edfad367bc0d695271e495ba91addeff5 Signed-off-by: Andrew Jeffery

linux-nuvoton: Move to v6.6.102 stable release

2025-08-18T01:45:12+00:00

Apply the upstream security and bug fixes. Change-Id: Id9f7ecabe2d156fe6953aeaf7b7b11717c5111fd Signed-off-by: Andrew Jeffery

meta-nuvoton: npcm8xx-bootloader: update IGPS to 04.03.08

2025-08-15T16:50:04+00:00

IGPS 04.03.08 - Jul 31th 2025 ============ - SystemControlFlags on L1 - added bits 5+6. 5 controls the ability to disable the UART log printing (1 = to disable) 6 controls the new option to write the log to an address in the memory - SystemControlFlags on L0 - added bits 0 or 1 to control the print to uart \ memory, added log size and address as well. - Fix Lms flags configuration on programmer monitor generation (left over from previews transition to .json file) - Fuse map XML file: * Edit the mask of * Add PQA 1 field - SKMT keys: removed SKMT ECC keys 2-3-4. we only use 0+1, change SKMT LMS keys 5-6 to 2-3. Udpated both SKMT XMLs (ECC + LMS) - Pad value: changed to 0 instead of 0xFF for L0 XML. - TIP_FW 0.8.2 L0 0.7.1 L1 * Added option to write the log to the memory instead and as addition to UART, using a flag from the L0 XML header and using the system flags on L1. * Added Baud rate 750000 option. * Added serial_printf_setup function that will include code from both serial_printf_init & serial_printf_reconfig. * Update CLK and UART drv code to latest HAL. * Supports AES, RNG, Flash, and FW update proxy commands to provide crypto services for A35. Code is under BMC_DIRECT flag, disabled by default. * SKMT keys: revert the manifest key to be the last one. * Split GCM AES from all the rest of AES engine. Remove GCM calls from main AES engine. * Bug fix: clear the SCRPAD mutex during init, for the case it's set previously. - LMS Changes: * Check the KMT valid key only if the key is ECC, not LMS * ECC verification needs sha alg enum, while LMS needs the digest length * Remove the 2nd keyindex loop - Bootblock 0.5.6 * Add the flag "-ftrack-macro-expansion=0" (easier for handling compilation errors). * Print chip revision flag correctly for A3. * Lock DRAM memory regions. TIP region is locked for tip mode only. - No change in NO_TIP mode. * Bug fix: reset UART FIFOs during serial_printf_init to avoid UART stuck when switching to 720MHz. - Register tables: set RCR locks on any reset (0x9FF instead of 0x100). * Add bit 11 for WOL reset handling. - Production scripts: * version numbder will be without 0s. (4.3.8 and not 04.03.08) * gerVersion.bat will look on \aglick as well as \tperry - Uboot v2023.10-npcm8xx-20250728 * Add configuration of SPI Chip select for Recovery boot ENV. * Support configurable VCD input source. * Add PCIE-RC driver. - Programmer monitor 1.1.6 - supports A3. Tested: Build pass and boot up successful with correct TIP FW latest version Signed-off-by: Tali Perry Signed-off-by: Adi Glick Signed-off-by: Tim Lee Change-Id: I4ce588463f15019955342ff0a829b02299d1fc14

meta-nuvoton: npcm8xx-tip-fw: update to 0.8.2.0.7.1

2025-08-15T16:49:48+00:00

Changelog: TIP_FW: 0.8.2 L0 0.7.1 L1 ============== - Added option to write the log to the memory instead and as addition to UART, using a flag from the L0 XML header and using the system flags on L1. - Added Baud rate 750000 option. - Added serial_printf_setup function that will include code from both serial_printf_init & serial_printf_reconfig. - Update CLK and UART drv code to latest HAL. - Supports AES, RNG, Flash, and FW update proxy commands to provide crypto services for A35. Code is under BMC_DIRECT flag, disabled by default. - SKMT keys: revert the manifest key to be the last one. - Split GCM AES from all the rest of AES engine. Remove GCM calls from main AES engine. - Bug fix: clear the SCRPAD mutex during init, for the case it's set previously. - LMS Changes: * Check the KMT valid key only if the key is ECC, not LMS * ECC verification needs sha alg enum, while LMS needs the digest length * Remove the 2nd keyindex loop Tested: Build pass and boot up successful with correct TIP FW latest version Signed-off-by: Tali Perry Signed-off-by: Adi Glick Signed-off-by: Tim Lee Change-Id: I37fedde23e595751d91dcdd54c6c513eae54ce8d

meta-nuvoton: npcm8xx-bootblock: update to 0.5.6

2025-08-15T16:49:33+00:00

Changelog: Bootblock 0.5.6 ============== - Add the flag -ftrack-macro-expansion=0 easier for handling compilation errors. - Print chip revision flag correctly for A3. - Lock DRAM memory regions. TIP region is locked for tip mode only. No change in NO_TIP mode. - Bug fix: reset UART FIFOs during serial_printf_init to avoid UART stuck when switching to 720MHz. Tested: Build pass and boot up successful with BB latest version Signed-off-by: Tali Perry Signed-off-by: Tim Lee Change-Id: I6e88af0afe714fa1877acfcb34a1541116e5d147

linux-nuvoton: MPQ8785, AST700 silicon ID, ASPEED DTS fixes

2025-08-08T05:11:30+00:00

Charles Hsu (2): dt-bindings: Add MPQ8785 voltage regulator device hwmon: Add driver for MPS MPQ8785 Synchronous Step-Down Converter Rob Herring (Arm) (3): ARM: dts: aspeed: Drop "no-gpio-delays" ARM: dts: aspeed: Drop "fsi-master" compatibles ARM: dts: aspeed: Add missing "ibm,spi-fsi" compatibles Ryan Chen (1): soc: aspeed: socinfo: Add AST27xx silicon IDs Shen Lichuan (1): hwmon: (pmbus/mpq8785) Convert comma to semicolon Tan Siewert (4): ARM: dts: aspeed: e3c246d4i: convert NVMEM content to layout syntax ARM: dts: aspeed: e3c256d4i: convert NVMEM content to layout syntax ARM: dts: aspeed: romed8hm3: convert NVMEM content to layout syntax ARM: dts: aspeed: x570d4u: convert NVMEM content to layout syntax Change-Id: I97332e700f57d54e84ec6067c45da8f69bd6dbf5 Signed-off-by: Andrew Jeffery