BMC/tmp/openbmc.git/meta-ibm, branch 2.10.0-dev

sensors:max31785-msl: Enable/install max31785-msl package

2020-11-23T20:00:33+00:00

The max31785-msl application is now a package within the phosphor-hwmon recipe, so that package needs to be enabled and installed on `ibm-ac-server` alias of machines which have a max31785 chip. These machines require that the minimum ship level(msl) be verified on them using this application. Tested: Built phosphor-hwmon package after enabling max31785-msl package Verified application, config file, and service existed in image (From meta-ibm rev: 33184059fa07ca12e11fb9e8dde2d6a31e1f029e) Change-Id: I186fb6ca930e4107738d4ed90d31b6233be3d6f2 Signed-off-by: Matthew Barth Signed-off-by: Andrew Geissler

fans: Unpin from temporary commit

2020-11-23T20:00:33+00:00

Use the latest bumped upstream commit of the phosphor-fan-presence repo. (From meta-ibm rev: a5824115356901e363c55f0d013a9821a51eba1b) Change-Id: Ib5f3e4718de3f288bf71321680d42234512d1be9 Signed-off-by: Matthew Barth Signed-off-by: Andrew Geissler

meta-ibm: update Yocto compat for gatesgarth

2020-11-22T16:39:33+00:00

The next release of Yocto is soon and most of the upstream layers have switched support strings for it. Support layer compat for gatesgarth (current) and dunfell (previous). (From meta-ibm rev: 284e2ad06544f567582b2732a22e052190b5b95a) Signed-off-by: Patrick Williams Change-Id: Ic1cb74ebd387715b08feccd8b94bfd0be7d35205 Signed-off-by: Andrew Geissler

health-mon: remove from ibm systems

2020-11-20T13:50:11+00:00

The phosphor-health-monitor package added some code recently that only supports a mtdblock based filesystem. This causes issues with the HW CI machine, witherspoon, documented in openbmc/phosphor-health-monitor#1. Time permitting, IBM should come back to the phosphor-health-monitor and figure out if it makes sense within it's products. If it does, then the appropriate bmc_health_config.json should be created for IBM systems. (From meta-ibm rev: 3a70e470e8ec8239e27db9b7361f568cebd5ef72) Signed-off-by: Andrew Geissler Change-Id: I02dff59cade863d287919a01d0b1f93f67661279 Signed-off-by: Andrew Geissler

Dump manager: Add system_dump_policy object

2020-11-20T13:38:25+00:00

This commit adds the system_dump_policy object to the xyz.openbmc_project.Settings. This is used to enable or disable the system dump. Default value is true Tested by: busctl tree xyz.openbmc_project.Settings └─/xyz └─/xyz/openbmc_project ├─/xyz/openbmc_project/dump │ └─/xyz/openbmc_project/dump/system_dump_policy busctl introspect xyz.openbmc_project.Settings /xyz/openbmc_project/dump/system_dump_policy (From meta-ibm rev: ad88bbcbbd01d92773f61b1712f5e458f1b661bd) Signed-off-by: Sunitha Harish Change-Id: Ieae8a01a266ba8ff2d984b1a1b2ea9ada243d439 Signed-off-by: Andrew Geissler

fans:witherspoon: Disable JSON on fan control

2020-11-18T14:04:07+00:00

Witherspoon should still use YAML based configs for fan control instead of JSON. Once all of fan control's JSON support is available and witherspoon's YAML fan configs are converted to JSON, this can be removed to enable JSON. *Temporarily pin to 8e1b382122fed73e788d44f3a67cecbfbcc6972e to pass CI (From meta-ibm rev: 7ec9b860b5ea1d986702bb978b528ddcd28f2ce5) Change-Id: Ic31f5ab915d5478b9a2027732bd3ffd44f50b02f Signed-off-by: Matthew Barth Signed-off-by: Andrew Geissler

rainier: Add virtual ambient temp thresholds

2020-11-17T22:31:51+00:00

The phosphor-virtual-sensor code recently started checking the values of the upper/lower warning/critical thresholds for the virtual sensors and prints to the journal if they are exceeded. If the threshold values to use aren't specified in the JSON file, it will just set them to zero so any nonzero sensor value will trigger the trace. So, even though code will not use the threshold values for the virtual ambient temperature sensor, put some into the JSON anyway that should never be exceeded to avoid these traces. If the temperature does happen to go outside the range of between 0 and 100, then seeing the trace may be interesting anyway. (From meta-ibm rev: 9fdb9598d0eee4d9820962320391bb9f7e4568ea) Signed-off-by: Matt Spinler Change-Id: I1c6c5f1faaaf58599a3840eed6ec4749a70a1364 Signed-off-by: Andrew Geissler

remove += from _append

2020-11-17T22:31:51+00:00

No need to use _append and += (From meta-ibm rev: 72b20dddfcd790a0a0398ec4c16e76b54866b989) Signed-off-by: Andrew Geissler Change-Id: Ibcbd5c83a137799f4f80d017e19a8d9b9a9f681f Signed-off-by: Andrew Geissler

rainier: Only install one dbus-sensors service

2020-11-17T01:07:59+00:00

Rainier is only using the hwmontempsensor dbus-sensors service for now, so remove the other ones. Without this, 8 other services would be running at BMC ready state. (From meta-ibm rev: b51345ced440ca935f8678d8521a690301e63db5) Signed-off-by: Matt Spinler Change-Id: If60d9a0ba585c029877c5fda77b5085cec394d04 Signed-off-by: Andrew Geissler

wistron-ipmi-oem: srcrev bump 44cee319dd..ba89a1ea57

2020-11-11T21:41:50+00:00

Ben Pai (1): Add wistron oem command to switch 250 soc image (From meta-ibm rev: 3aa9904064a954031fac32b462c26c0b6d541ef1) Change-Id: I6cc97288c35a1ac1f97f55ad0fe179dce9636bb0 Signed-off-by: Andrew Geissler Signed-off-by: Andrew Geissler