OpenBMC Distribution (mirror) https://git.radix-linux.su/BMC/tmp/openbmc.git/atom?h=2.17.0-dev 2024-07-09T18:46:08+00:00 2024-07-09T18:46:08+00:00 Peter Yin peter.yin@quantatw.com 2024-07-05T14:30:46+00:00 urn:sha1:f2b18675f6dbc89f0c1624ed762e9cc4caf369f7 Add fan table to support auto fan. Change-Id: Id28a31d725d2d48951d0cd1937f941d7aceb8804 Signed-off-by: Peter Yin <peter.yin@quantatw.com> 2024-07-05T16:22:06+00:00 Peter Yin peter.yin@quantatw.com 2024-07-05T16:16:07+00:00 urn:sha1:6b43a62034d68a259a6f6caabd5b475b5e596075 The leakage detection signal always triggers the power-hsc-good to turn off, so use power-hsc-good to handle it. Change-Id: I9ec607aaee771b579c794bba7dc8f6c2ecc437f0 Signed-off-by: Peter Yin <peter.yin@quantatw.com> 2024-07-02T21:16:23+00:00 Delphine CC Chiu Delphine_CC_Chiu@wiwynn.com 2024-06-24T07:05:08+00:00 urn:sha1:4d24a085792e177ebe5c2678dfea7f4eccd82454 Change-Id: I0c6c8b01168d17364fdd3b2169471190ff46cfc7 Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> 2024-07-02T21:15:50+00:00 Delphine CC Chiu delphine_cc_chiu@wiwynn.com 2024-06-21T06:10:21+00:00 urn:sha1:cc6df074b89539d372a8596b92e87e2ecc1f7099 1. Add retry of gpioget/gpioset function since gpio control is mutual exclusive 2. Remove EID removal workaround. 3. Extend 12v cycle interval which let entity-manager have enough time to detect FRU removal. Change-Id: I736ea4cdac9ea9d27efa3c31f40be847be0c50a8 Signed-off-by: Delphine CC Chiu <delphine_cc_chiu@wiwynn.com> 2024-07-02T20:40:39+00:00 Delphine CC Chiu Delphine_CC_Chiu@wiwynn.com 2024-06-18T09:25:41+00:00 urn:sha1:4010a5cd016e9cc9802a10609727beafdef76064 Support OCP debug card use in the yosemite4 system. Change-Id: I72a4b20a3241e1097dc3fcb053afa4362ee2b370 Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> 2024-07-02T20:26:09+00:00 Delphine CC Chiu Delphine_CC_Chiu@wiwynn.com 2024-06-11T03:25:00+00:00 urn:sha1:71d37433dfb0cc4fa7b7050e4149667944335e77 Due to the hardware design, sensor polling from other NICs need to be disabled before set the NIC's EID. Change-Id: I609d35b4ce58bf659b551eb16380008673455b04 Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> 2024-07-01T11:31:47+00:00 PeterHo-wiwynn peter.ho.wiwynn@gmail.com 2024-07-01T08:07:01+00:00 urn:sha1:28670cea63363a44c2a7d4597f7075043e4e552f Port 99-platform-init from bletchley to enable alternate boot. Tested: - FMC_WDT2 is enabled and timer is counting down: ``` U-Boot SPL 2019.04 yosemite4-runtime-addc-test (Mar 25 2024 - 04:43:19 +0000) already initialized, Trying to boot from RAM U-Boot 2019.04 yosemite4-runtime-addc-test (Mar 25 2024 - 04:43:19 +0000) SOC: AST2620-A3 RST: WDT1 SOC PCI RST: #2 RST: External FMC 2nd Boot (ABR): Enable, Dual flashes, Source: Primary Set FMC_WDT2 timer reload value to 0x0BB8 eSPI Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RMII/NCSI, MAC1: RMII/NCSI, MAC2: RMII/NCSI, MAC3: RMII/NCSI Model: AST2600 EVB DRAM: already initialized, 1 GiB (capacity:1024 MiB, VGA:0 MiB, ECC:off) MMC: sdhci_slot0@100: 1, sdhci_slot1@200: 2, emmc_slot0@100: 0 Loading Environment from SPI Flash... SF: Detected mx66l1g45g with page size 256 Bytes, erase size 4 KiB, total 128 MiB OK In: serial@1e784000 Out: serial@1e784000 Err: serial@1e784000 Model: AST2600 EVB Net: No MDIO found. No ethernet found. Hit any key to stop autoboot: 0 ast# md.l 0x1e620064 2 1e620064: 00000001 0b0a0bb8 ........ ast# md.l 0x1e620064 2 ``` - Boot from alternate flash when timeout occured: ``` U-Boot 2019.04 yosemite4-runtime-addc-test (Mar 25 2024 - 04:43:19 +0000) SOC: AST2620-A3 PCI RST: #2 RST: SYS_FLASH_ABR_RESET FMC 2nd Boot (ABR): Enable, Dual flashes, Source: Alternate Set FMC_WDT2 timer reload value to 0x0BB8 eSPI Mode: SIO:Enable : SuperIO-2e Eth: MAC0: RMII/NCSI, MAC1: RMII/NCSI, MAC2: RMII/NCSI, MAC3: RMII/NCSI Model: AST2600 EVB DRAM: already initialized, 1 GiB (capacity:1024 MiB, VGA:0 MiB, ECC:off) MMC: ... root@bmc:~# devmem 0x1e620064 0x00000110 root@bmc:~# devmem 0x1e620068 0x0BB80BB8 root@bmc:~# cat /run/media/slot 1 ``` Change-Id: I524eae906526c16469f1dd2d0927c289c35a7380 Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> 2024-07-01T06:56:41+00:00 PeterHo-wiwynn peter.ho.wiwynn@gmail.com 2024-07-01T06:55:30+00:00 urn:sha1:b0f22c16f260d4ac5fd1f1bbf53afc819860d693 Enable Aspeed OTP driver to support OTP programming. Change-Id: I326bde0443446aae0d774d590352fdb40cd43fe9 Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@wiwynn.com> 2024-06-28T17:13:26+00:00 Yang Chen yang.chen@quantatw.com 2024-06-28T15:15:10+00:00 urn:sha1:77c94fa9ba38f7e1f827766e734587a239520cd6 - Enable phosphor-gpio-monitor-presence. - Move presence related pins from monitor to presence. - Add pins as below in gpio monitor to record event log - CHASSIS_LEAK0_DETECT_N - CHASSIS_LEAK1_DETECT_N - RPU_READY_SPARE - Remove unused service and script. Change-Id: I8116c0a485f6cf2d65282c065c76d4d9132e6787 Signed-off-by: Yang Chen <yang.chen@quantatw.com> 2024-06-28T15:14:36+00:00 Daniel Hsu Daniel-Hsu@quantatw.com 2024-06-21T08:19:05+00:00 urn:sha1:815ecb1b558de2c7303654fc6d9cb0807671165e Update blacklist.json for PSOC and SITV bus updates in DVT Add blacklist "Bus 9 address 0x20" for preventing BIC Crashes on AEGIS Del blacklist "Bus 11" for AEGIS FRU info Change-Id: I01f061e28629509b25592023da6753f9293c2e89 Signed-off-by: Daniel Hsu <Daniel-Hsu@quantatw.com>