BMC/tmp/openbmc.git/meta-evb/meta-evb-arm, branch masterOpenBMC Distribution (mirror)https://git.radix-linux.su/BMC/tmp/openbmc.git/atom?h=master2025-08-21T18:06:51+00:00meta-evb-fvp-base: fix bitbake warnings2025-08-21T18:06:51+00:00Mohammed Javith Akthar Mmohammedjavitham@ami.com2025-07-30T07:22:40+00:00urn:sha1:84ef2fcc2c21685396efe9bc71390e80686d0a55
Addressed the following warning messages when building the FVP
machine configuration
1. WARNING: fvp-config.inc has a lack of whitespace around the
assignment
2. WARNING: Duplicate inclusion for mctp.inc in pldm.inc
Testing:
Before fix:
Warning messages were displayed when executing the "bitbake
obmc-phosphor-image" command.
After fix:
Warning messages are no longer displayed.
Change-Id: Ib63e4357a3abe0f383d6aa8c580286824f01bed8
Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
meta-evb-fvpbase: enable virtio-net for FVP2025-07-24T00:43:29+00:00Mohammed Javith Akthar Mmohammedjavitham@ami.com2025-06-30T09:30:23+00:00urn:sha1:1eb0b064bcd64bd443a06777f3ad0c490ca1209c
Enable virtio-net as an alternative NIC in FVP. FVP uses smsc_91c111
for NIC and its support is deprecated in uboot[1]. So, an
alternative NIC configuration is required for network access in uboot.
Testing:
Configured a TAP interface named 'tap1' for out-of-band access.
Sample setup on Ubuntu (requires sudo):
sudo apt update
sudo apt install qemu-kvm libvirt-daemon-system iproute2 bridge-utils
sudo ip tuntap add dev tap1 mode tap user $(whoami)
sudo ifconfig tap1 0.0.0.0 promisc up
sudo brctl addif virbr0 tap1
Execute 'ip a' command in BMC shell and observe the NIC configuration.
Before:
eth0 -> smsc_91c111
After:
eth0 -> virtio-net
eth1 -> smsc_91c111
References:
1. https://patchwork.ozlabs.org/project/uboot/patch/20220802113424.2988464-10-trini@konsulko.com
Change-Id: I445aecb6aefdb422a14fe131a64fc3de3b6865f9
Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
treewide: add whinlatter LAYERSERIES_COMPAT2025-07-23T16:31:44+00:00Patrick Williamspatrick@stwcx.xyz2025-07-23T15:27:13+00:00urn:sha1:a7e82f1843133483b8dbbb8430bf8dcb8c5f0a74
Change-Id: I1d53510329749ff122c8a65157a72c8ff88bd306
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
meta-phosphor: bmcweb options to PACKAGECONFIG2025-07-22T15:20:55+00:00Ed Tanoused@tanous.net2025-06-30T19:01:55+00:00urn:sha1:11a2e68c782ffe7e2e6cbf7d793b74de4c37b867
For some of the most commonly set bmcweb options, change them into
packageconfig entries.
Systems that used these config options have been moved to the
PACKAGECONFIG. Some systems that had CMAKE build options still had
those directly removed.
Change-Id: I741f60a725905d67f7a8ef698f95b25895088db4
Signed-off-by: Ed Tanous <etanous@nvidia.com>
meta-evb: add whitespace around variable definitions2025-07-07T20:34:30+00:00Patrick Williamspatrick@stwcx.xyz2025-07-07T20:07:40+00:00urn:sha1:9f4ad1ee802a4be960502d61d6a6683191f4fb28
Latest bitbake gives a QA warning for "lack of whitespace around the
assignment". Clean these up.
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I7ec3f2a0471a99611071db0aefc2ec6b1323e3ca
meta-evb: meta-evb-arm: Support Arm SBMR Boot Progress Code2025-06-02T01:22:41+00:00John Chungjohn.chung@arm.com2025-05-19T14:04:29+00:00urn:sha1:5d8b0ec32d309379f3360197ea5cee116fbbc87b
Enable IPMI SBMR commands to capture the boot progress code
and update on Redfish BootProgress property and Redfish
PostCodes log service.
Change-Id: I8e3b5eb777f69c8932fb088db09d3088635a4a9e
Signed-off-by: John Chung <john.chung@arm.com>
treewide: add walnascar LAYERSERIES_COMPAT2025-05-24T15:35:56+00:00Patrick Williamspatrick@stwcx.xyz2025-05-24T15:35:50+00:00urn:sha1:50c70479876ec201178500397b99e3df6a5fba87
Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Change-Id: I6291eeaf0ca7d4bd674bf0717f1234bfd757f6fe
meta-evb-fvp-base: SOL support2025-05-15T12:47:47+00:00Mohammed Javith Akthar Mmohammedjavitham@ami.com2025-04-25T06:07:50+00:00urn:sha1:1bf76f8cd4b2ad61b1438d7eb539214202e4ab61
This commit enables host serial console access in base fvp (BMC).
In BMC, UART3(ttyAMA3) is mapped for SOL access.
Testing:
1. Verified using RD-V3-R1 FVP + Base FVP (running OpenBMC firmware)
2. Connect host console with BMC via socat command
> socat -x tcp:localhost:5005 tcp:localhost:5067
3. Update the host state as running in BMC in debug console
> busctl set-property xyz.openbmc_project.State.Host
/xyz/openbmc_project/state/host0 xyz.openbmc_project.State.Host
CurrentHostState s
xyz.openbmc_project.State.Host.HostState.Running
4. Log-in to BMC webui via https://127.0.0.1:4223
5. Accesss SOL console from Overview page
Change-Id: I5d797b2b6f57a16d5b53f32c8aa422d102b55c56
Signed-off-by: Mohammed Javith Akthar M <mohammedjavitham@ami.com>
meta-evb: meta-evb-arm: Update README.md2025-04-08T13:44:50+00:00John Chungjohn.chung@arm.com2025-03-06T00:05:23+00:00urn:sha1:c4ecedd5a92d928838c9366feab6d3ee8dcfd4f4
* Add IPMI Serial interface and usage
* Update Neoverse FVP reference documents
Signed-off-by: John Chung <john.chung@arm.com>
Change-Id: I4abc56bb0ee1eb8f9cdb97743e04494230b911ce
meta-evb: meta-evb-arm: Enable IPMI HW Serial Interface2025-04-08T13:44:30+00:00John Chungjohn.chung@arm.com2025-03-05T05:11:55+00:00urn:sha1:18bc7a54cbba8fc0c1a0414d2c319d12442f37e1
Enable IPMI Serial interface support in meta-evb-arm that
allows to communicate with Arm Host FVP.
Signed-off-by: John Chung <john.chung@arm.com>
Change-Id: If991767caf57e7f2e7b13e21c66cd940908acf0f