BMC/tmp/openbmc.git/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb, branch 2.12.0-dev

linux-aspeed: Move to v5.15.5 stable release

2021-11-25T23:18:50+00:00

This includes security and bug fixes from the 5.15.1 through to 5.15.5 stable releases. Signed-off-by: Joel Stanley Change-Id: Ibe8c433439b5863b0d49934d4d43b239bdc736d7

linux-aspeed: Fixes for SCU IRQ, MDIO, clock, vga_pw

2021-11-25T22:52:47+00:00

Billy Tsai (1): irqchip/aspeed-scu: Replace update_bits with write_bits. Dylan Hung (1): mdio: aspeed: Fix "Link is Down" issue Joel Stanley (2): drm/aspeed: Fix vga_pw sysfs output clk/ast2600: Fix soc revision for AHB Change-Id: Idd8d89c4869faa8528f1c5066ec3ed467ea85911 Signed-off-by: Joel Stanley

linux-aspeed: nct7802 bindings and configurability

2021-11-05T04:59:56+00:00

Oskar Senft (3): dt-bindings: hwmon: Add nct7802 bindings hwmon: (nct7802) Make temperature/voltage sensors configurable ARM: dts: aspeed: tyan-s7106: Update nct7802 config Signed-off-by: Oskar Senft Change-Id: I6dedace1a62f136c461ce6a207ef925d0bd072d1

linux-aspeed: UART routing

2021-11-03T03:14:12+00:00

Chia-Wei Wang (2): soc: aspeed: Add UART routing support soc: aspeed: Fix UART routing driver Change-Id: I4a6fc7ee06e7e32ef15ceba79d278869e6c6c42e Signed-off-by: Joel Stanley

linux-aspeed: Move to Linux v5.15

2021-11-01T23:01:02+00:00

This moves the OpenBMC kernel to a v5.15 base. There are 73 patches in the tree, not counting changes that were merged in v5.16 which have been backported. Andrew Jeffery (10): dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation pmbus (max31785): Add support for devicetree configuration pmbus (core): Use driver callbacks in pmbus_get_fan_rate() pmbus (core): One-shot retries for failure to set page pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers ARM: dts: aspeed: witherspoon: Update max31785 node ipmi: kcs_bmc: Add a "raw" character device interface ARM: dts: tacoma: Clean up KCS nodes leds: pca955x: Make the gpiochip always expose all pins leds: pca955x: Allow zero LEDs to be specified Brad Bishop (3): ipmi: aspeed-g6: Add compatible strings reset: simple: Add AST2600 compatibility string eeprom: at25: Split reads into chunks and cap write size Cédric Le Goater (19): mtd: spi-nor: aspeed: use command mode for reads mtd: spi-nor: aspeed: add support for SPI dual IO read mode mtd: spi-nor: aspeed: link controller with the ahb clock mtd: spi-nor: aspeed: optimize read mode mtd: spi-nor: aspeed: limit the maximum SPI frequency mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper mtd: spi-nor: aspeed: clarify 4BYTE address mode mask mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer mtd: spi-nor: aspeed: add support for the 4B opcodes mtd: spi-nor: Add support for w25q512jv mtd: spi-nor: aspeed: Introduce a field for the AHB physical address mtd: spi-nor: aspeed: Introduce segment operations mtd: spi-nor: aspeed: add initial support for ast2600 mtd: spi-nor: aspeed: Check for disabled segments on the AST2600 mtd: spi-nor: aspeed: Introduce training operations per platform mtd: spi-nor: aspeed: Introduce a HCLK mask for training mtd: spi-nor: aspeed: check upper freq limit when doing training mtd: spi-nor: aspeed: add support for AST2600 training /dev/mem: add a devmem kernel parameter to activate the device Eddie James (8): soc: aspeed: Add XDMA Engine Driver soc: aspeed: xdma: Add user interface soc: aspeed: xdma: Add reset ioctl dt-bindings: input: Add documentation for IBM Operation Panel input: misc: Add IBM Operation Panel driver ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO spi: fsi: Print status on error spi: fsi: Fix contention in the FSI2SPI engine Fran Hsu (2): ARM: dts: nuvoton: npcm730: Add UDC device ARM: dts: nuvoton: gsj: Add non-mainline nodes George Hung (4): dt-binding: edac: add NPCM ECC documentation edac: npcm: Add Nuvoton NPCM7xx EDAC driver ARM: dts: nuvoton: gbs: split SPI flash partition ARM: dts: nuvoton: gbs: Change the name of the partitions Jae Hyun Yoo (1): clk: ast2600: enable BCLK for PCI/PCIe bus always Joel Stanley (4): net: ftgmac100: Ensure tx descriptor updates are visible ARM: dts: ast2600evb: Enable EHCI controller ARM: configs: aspeed: Add openbmc kernel options ipmi: bt-bmc: Use registers directly Tomer Maimon (21): dt-binding: bmc: Add NPCM7xx LPC BPC documentation misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver dt-binding: bmc: add npcm7xx pci mailbox document misc: mbox: add npcm7xx pci mailbox driver dt-binding: net: document NPCM7xx EMC DT bindings net: npcm: add NPCM7xx Ethernet MAC controller ARM: dts: npcm7xx: Add out of tree nodes ARM: dts: olympus: Add non-mainline nodes ARM: dts: npcm750: Add fuse regmap support node ARM: dts: npcm7xx: Link fuse syscon to adc and wdt clk: npcm7xx: add read only flag to divider clocks iio: adc: Add calibration support to npcm ADC watchdog: npcm: Add DT restart priority and reset type support pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver pinctrl: pinconf: add pin persist configuration pinctrl: npcm7xx: Add pin persist configuration support spi: npcm-pspi: Add full duplex support dt-binding: bmc: add NPCM7XX JTAG master documentation misc: Add NPCM7xx JTAG master driver watchdog: npcm: Modify get reset status function ARM: configs: add defconfig for Nuvoton NPCM7xx BMC William A. Kennington III (1): net: npcm: Support for fixed PHYs Change-Id: I8c26f71ba75e4f8d8b5697b81f8c73c0d77aae8e Signed-off-by: Joel Stanley

linux-aspeed: FSI backports

2021-11-01T22:59:57+00:00

Patches from the v5.16 kernel relating to FSI, OCC and SBE FIFO. Eddie James (7): fsi: occ: Use a large buffer for responses fsi: occ: Store the SBEFIFO FFDC in the user response buffer docs: ABI: testing: Document the OCC hwmon FFDC binary interface hwmon: (occ) Provide the SBEFIFO FFDC in binary sysfs docs: ABI: testing: Document the SBEFIFO timeout interface fsi: sbefifo: Add sysfs file indicating a timeout error fsi: sbefifo: Use interruptible mutex locking Change-Id: Iab76e0b1cf658334d8ab0f43bb6c3d1b8912f7a5 Signed-off-by: Joel Stanley

linux-aspeed: Move to v5.14.15 stable release

2021-10-28T23:11:25+00:00

This includes security and bug fixes from the 5.14.11 through to 5.14.15 stable releases. Change-Id: Ida64acaa1f9c7c26d987fa7979ef29320924f2f0 Signed-off-by: Joel Stanley

linux-aspeed: SPI FSI, DTS GPIOs

2021-10-28T23:11:00+00:00

Adriana Kobylak (1): ARM: dts: aspeed: rainier: Add power-config-full-load gpio Eddie James (1): spi: fsi: Print status on error Joel Stanley (2): ARM: dts: aspeed: p10bmc: Define secure boot gpio ARM: dts: aspeed: rainier: Remove remaining PCA955X_TYPE_GPIO Change-Id: Ibbfc482ba2ee1a008006875d6065cc36d7c7da20 Signed-off-by: Joel Stanley

linux-aspeed: Rainier, Everest, ADC

2021-10-20T23:35:08+00:00

Eddie James (5): ARM: dts: aspeed: Fix ADC iio-hwmon battery node name ARM: dts: aspeed: rainier and everest: Remove PCA gpio specification ARM: dts: aspeed: everest: Add I2C switch on bus 8 ARM: dts: aspeed: everest: Add IBM Operation Panel I2C device ARM: dts: aspeed: everest: Fix bus 15 muxed eeproms Joel Stanley (1): iio: aspeed_adc: Fix prescaler devres cleanup Change-Id: Icd9903844c926c0d41d912716520eb3807c59039 Signed-off-by: Joel Stanley

linux-aspeed: LM25066

2021-10-18T23:34:30+00:00

Zev Weiss (8): hwmon: (pmbus/lm25066) Add offset coefficients hwmon: (pmbus/lm25066) Adjust lm25066 PSC_CURRENT_IN_L mantissa hwmon: (pmbus/lm25066) Avoid forward declaration of lm25066_id hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeff hwmon: (pmbus/lm25066) Mark lm25066_coeff array const hwmon: (pmbus/lm25066) Add OF device ID table hwmon: (pmbus/lm25066) Support configurable sense resistor values dt-bindings: hwmon/pmbus: Add ti, lm25066 power-management IC Change-Id: I3bd76959963ad7de008197f7349c72b088eb1147 Signed-off-by: Joel Stanley