diff options
Diffstat (limited to 'poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst')
-rw-r--r-- | poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst | 651 |
1 files changed, 651 insertions, 0 deletions
diff --git a/poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst b/poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst new file mode 100644 index 0000000000..97c5af6a0c --- /dev/null +++ b/poky/documentation/toaster-manual/toaster-manual-setup-and-use.rst @@ -0,0 +1,651 @@ +.. SPDX-License-Identifier: CC-BY-SA-2.0-UK +.. Set default pygment highlighting to 'shell' for this document +.. highlight:: shell + +**************************** +Setting Up and Using Toaster +**************************** + +Starting Toaster for Local Development +====================================== + +Once you have set up the Yocto Project and installed the Toaster system +dependencies as described in the ":ref:`toaster-manual/toaster-manual-start:Preparing to Use +Toaster`" chapter, you are ready to start +Toaster. + +Navigate to the root of your +:term:`Source Directory` (e.g. ``poky``):: + + $ cd poky + +Once in that directory, source the build environment script:: + + $ source oe-init-build-env + +Next, from the build directory (e.g. +``poky/build``), start Toaster using this command:: + + $ source toaster start + +You can now run your builds from the command line, or with Toaster +as explained in section +":ref:`toaster-manual/toaster-manual-setup-and-use:using the toaster web interface`". + +To access the Toaster web interface, open your favorite browser and +enter the following:: + + http://127.0.0.1:8000 + +Setting a Different Port +======================== + +By default, Toaster starts on port 8000. You can use the ``WEBPORT`` +parameter to set a different port. For example, the following command +sets the port to "8400":: + + $ source toaster start webport=8400 + +Setting Up Toaster Without a Web Server +======================================= + +You can start a Toaster environment without starting its web server. +This is useful for the following: + +- Capturing a command-line build's statistics into the Toaster database + for examination later. + +- Capturing a command-line build's statistics when the Toaster server + is already running. + +- Having one instance of the Toaster web server track and capture + multiple command-line builds, where each build is started in its own + "noweb" Toaster environment. + +The following commands show how to start a Toaster environment without +starting its web server, perform BitBake operations, and then shut down +the Toaster environment. Once the build is complete, you can close the +Toaster environment. Before closing the environment, however, you should +allow a few minutes to ensure the complete transfer of its BitBake build +statistics to the Toaster database. If you have a separate Toaster web +server instance running, you can watch this command-line build's +progress and examine the results as soon as they are posted:: + + $ source toaster start noweb + $ bitbake target + $ source toaster stop + +Setting Up Toaster Without a Build Server +========================================= + +You can start a Toaster environment with the "New Projects" feature +disabled. Doing so is useful for the following: + +- Sharing your build results over the web server while blocking others + from starting builds on your host. + +- Allowing only local command-line builds to be captured into the + Toaster database. + +Use the following command to set up Toaster without a build server:: + + $ source toaster start nobuild webport=port + +Setting up External Access +========================== + +By default, Toaster binds to the loop back address (i.e. ``localhost``), +which does not allow access from external hosts. To allow external +access, use the ``WEBPORT`` parameter to open an address that connects +to the network, specifically the IP address that your NIC uses to +connect to the network. You can also bind to all IP addresses the +computer supports by using the shortcut "0.0.0.0:port". + +The following example binds to all IP addresses on the host:: + + $ source toaster start webport=0.0.0.0:8400 + +This example binds to a specific IP address on the host's NIC:: + + $ source toaster start webport=192.168.1.1:8400 + +The Directory for Cloning Layers +================================ + +Toaster creates a ``_toaster_clones`` directory inside your Source +Directory (i.e. ``poky``) to clone any layers needed for your builds. + +Alternatively, if you would like all of your Toaster related files and +directories to be in a particular location other than the default, you +can set the ``TOASTER_DIR`` environment variable, which takes precedence +over your current working directory. Setting this environment variable +causes Toaster to create and use ``$TOASTER_DIR./_toaster_clones``. + +.. _toaster-the-build-directory: + +The Build Directory +=================== + +Toaster creates a build directory within your Source Directory (e.g. +``poky``) to execute the builds. + +Alternatively, if you would like all of your Toaster related files and +directories to be in a particular location, you can set the +``TOASTER_DIR`` environment variable, which takes precedence over your +current working directory. Setting this environment variable causes +Toaster to use ``$TOASTER_DIR/build`` as the build directory. + +.. _toaster-creating-a-django-super-user: + +Creating a Django Superuser +=========================== + +Toaster is built on the `Django +framework <https://www.djangoproject.com/>`__. Django provides an +administration interface you can use to edit Toaster configuration +parameters. + +To access the Django administration interface, you must create a +superuser by following these steps: + +#. If you used ``pip3``, which is recommended, to set up the Toaster + system dependencies, you need be sure the local user path is in your + ``PATH`` list. To append the pip3 local user path, use the following + command:: + + $ export PATH=$PATH:$HOME/.local/bin + +#. From the directory containing the Toaster database, which by default + is the :term:`Build Directory`, + invoke the ``createsuperuser`` command from ``manage.py``:: + + $ cd ~/poky/build + $ ../bitbake/lib/toaster/manage.py createsuperuser + +#. Django prompts you for the username, which you need to provide. + +#. Django prompts you for an email address, which is optional. + +#. Django prompts you for a password, which you must provide. + +#. Django prompts you to re-enter your password for verification. + +After completing these steps, the following confirmation message +appears:: + + Superuser created successfully. + +Creating a superuser allows you to access the Django administration +interface through a browser. The URL for this interface is the same as +the URL used for the Toaster instance with "/admin" on the end. For +example, if you are running Toaster locally, use the following URL:: + + http://127.0.0.1:8000/admin + +You can use the Django administration interface to set Toaster configuration +parameters such as the build directory, layer sources, default variable +values, and BitBake versions. + +.. _toaster-setting-up-a-production-instance-of-toaster: + +Setting Up a Production Instance of Toaster +=========================================== + +You can use a production instance of Toaster to share the Toaster +instance with remote users, multiple users, or both. The production +instance is also the setup that can handle heavier loads on the web +service. Use the instructions in the following sections to set up +Toaster to run builds through the Toaster web interface. + +.. _toaster-production-instance-requirements: + +Requirements +------------ + +Be sure you meet the following requirements: + +.. note:: + + You must comply with all Apache, ``mod-wsgi``, and Mysql requirements. + +- Have all the build requirements as described in the ":ref:`toaster-manual/toaster-manual-start:Preparing to + Use Toaster`" chapter. + +- Have an Apache webserver. + +- Have ``mod-wsgi`` for the Apache webserver. + +- Use the Mysql database server. + +- If you are using Ubuntu, run the following:: + + $ sudo apt-get install apache2 libapache2-mod-wsgi-py3 mysql-server python3-pip libmysqlclient-dev + +- If you are using Fedora or a RedHat distribution, run the + following:: + + $ sudo dnf install httpd python3-mod_wsgi python3-pip mariadb-server mariadb-devel python3-devel + +- If you are using openSUSE, run the following:: + + $ sudo zypper install apache2 apache2-mod_wsgi-python3 python3-pip mariadb mariadb-client python3-devel + +.. _toaster-installation-steps: + +Installation +------------ + +Perform the following steps to install Toaster: + +#. Create toaster user and set its home directory to + ``/var/www/toaster``:: + + $ sudo /usr/sbin/useradd toaster -md /var/www/toaster -s /bin/false + $ sudo su - toaster -s /bin/bash + +#. Checkout a copy of ``poky`` into the web server directory. You will + be using ``/var/www/toaster``:: + + $ git clone git://git.yoctoproject.org/poky + $ git checkout &DISTRO_NAME_NO_CAP; + +#. Install Toaster dependencies using the --user flag which keeps the + Python packages isolated from your system-provided packages:: + + $ cd /var/www/toaster/ + $ pip3 install --user -r ./poky/bitbake/toaster-requirements.txt + $ pip3 install --user mysqlclient + + .. note:: + + Isolating these packages is not required but is recommended. + Alternatively, you can use your operating system's package + manager to install the packages. + +#. Configure Toaster by editing + ``/var/www/toaster/poky/bitbake/lib/toaster/toastermain/settings.py`` + as follows: + + - Edit the + `DATABASES <https://docs.djangoproject.com/en/2.2/ref/settings/#databases>`__ + settings: + + .. code-block:: python + + DATABASES = { + 'default': { + 'ENGINE': 'django.db.backends.mysql', + 'NAME': 'toaster_data', + 'USER': 'toaster', + 'PASSWORD': 'yourpasswordhere', + 'HOST': 'localhost', + 'PORT': '3306', + } + } + + - Edit the + `SECRET_KEY <https://docs.djangoproject.com/en/2.2/ref/settings/#std:setting-SECRET_KEY>`__: + + .. code-block:: python + + SECRET_KEY = 'your_secret_key' + + - Edit the + `STATIC_ROOT <https://docs.djangoproject.com/en/2.2/ref/settings/#std:setting-STATIC_ROOT>`__: + + .. code-block:: python + + STATIC_ROOT = '/var/www/toaster/static_files/' + +#. Add the database and user to the ``mysql`` server defined earlier:: + + $ mysql -u root -p + mysql> CREATE DATABASE toaster_data; + mysql> CREATE USER 'toaster'@'localhost' identified by 'yourpasswordhere'; + mysql> GRANT all on toaster_data.\* to 'toaster'@'localhost'; + mysql> quit + +#. Get Toaster to create the database schema, default data, and gather + the statically-served files:: + + $ cd /var/www/toaster/poky/ + $ ./bitbake/lib/toaster/manage.py migrate + $ TOASTER_DIR=`pwd\` TEMPLATECONF='poky' \ + ./bitbake/lib/toaster/manage.py checksettings + $ ./bitbake/lib/toaster/manage.py collectstatic + + + In the previous + example, from the ``poky`` directory, the ``migrate`` command + ensures the database schema changes have propagated correctly (i.e. + migrations). The next line sets the Toaster root directory + ``TOASTER_DIR`` and the location of the Toaster configuration file + ``TOASTER_CONF``, which is relative to ``TOASTER_DIR``. The + ``TEMPLATECONF`` value reflects the contents of + ``poky/.templateconf``, and by default, should include the string + "poky". For more information on the Toaster configuration file, see + the ":ref:`toaster-manual/toaster-manual-reference:Configuring Toaster`" section. + + This line also runs the ``checksettings`` command, which configures + the location of the Toaster :term:`Build Directory`. + The Toaster + root directory ``TOASTER_DIR`` determines where the Toaster build + directory is created on the file system. In the example above, + ``TOASTER_DIR`` is set as follows:: + + /var/www/toaster/poky + + + This setting causes the Toaster build directory to be:: + + /var/www/toaster/poky/build + + Finally, the ``collectstatic`` command is a Django framework command + that collects all the statically served files into a designated + directory to be served up by the Apache web server as defined by + ``STATIC_ROOT``. + +#. Test and/or use the Mysql integration with Toaster's Django web + server. At this point, you can start up the normal Toaster Django + web server with the Toaster database in Mysql. You can use this web + server to confirm that the database migration and data population + from the Layer Index is complete. + + To start the default Toaster Django web server with the Toaster + database now in Mysql, use the standard start commands:: + + $ source oe-init-build-env + $ source toaster start + + Additionally, if Django is sufficient for your requirements, you can use + it for your release system and migrate later to Apache as your + requirements change. + +#. Add an Apache configuration file for Toaster to your Apache web + server's configuration directory. If you are using Ubuntu or Debian, + put the file here:: + + /etc/apache2/conf-available/toaster.conf + + + If you are using Fedora or RedHat, put it here:: + + /etc/httpd/conf.d/toaster.conf + + If you are using OpenSUSE, put it here:: + + /etc/apache2/conf.d/toaster.conf + + Following is a sample Apache configuration for Toaster you can follow: + + .. code-block:: apache + + Alias /static /var/www/toaster/static_files + <Directory /var/www/toaster/static_files> + <IfModule mod_access_compat.c> + Order allow,deny + Allow from all + </IfModule> + <IfModule !mod_access_compat.c> + Require all granted + </IfModule> + </Directory> + + <Directory /var/www/toaster/poky/bitbake/lib/toaster/toastermain> + <Files "wsgi.py"> + Require all granted + </Files> + </Directory> + + WSGIDaemonProcess toaster_wsgi python-path=/var/www/toaster/poky/bitbake/lib/toaster:/var/www/toaster/.local/lib/python3.4/site-packages + WSGIScriptAlias / "/var/www/toaster/poky/bitbake/lib/toaster/toastermain/wsgi.py" + <Location /> + WSGIProcessGroup toaster_wsgi + </Location> + + + If you are using Ubuntu or Debian, you will need to enable the config and + module for Apache:: + + $ sudo a2enmod wsgi + $ sudo a2enconf toaster + $ chmod +x bitbake/lib/toaster/toastermain/wsgi.py + + Finally, restart Apache to make sure all new configuration is loaded. For Ubuntu, + Debian, and OpenSUSE use:: + + $ sudo service apache2 restart + + For Fedora and RedHat use:: + + $ sudo service httpd restart + +#. Prepare the systemd service to run Toaster builds. Here is a sample + configuration file for the service: + + .. code-block:: ini + + [Unit] + Description=Toaster runbuilds + + [Service] + Type=forking User=toaster + ExecStart=/usr/bin/screen -d -m -S runbuilds /var/www/toaster/poky/bitbake/lib/toaster/runbuilds-service.sh start + ExecStop=/usr/bin/screen -S runbuilds -X quit + WorkingDirectory=/var/www/toaster/poky + + [Install] + WantedBy=multi-user.target + + + Prepare the ``runbuilds-service.sh`` script that you need to place in the + ``/var/www/toaster/poky/bitbake/lib/toaster/`` directory by setting + up executable permissions:: + + #!/bin/bash + + #export http_proxy=http://proxy.host.com:8080 + #export https_proxy=http://proxy.host.com:8080 + #export GIT_PROXY_COMMAND=$HOME/bin/gitproxy + cd ~/poky/ + source ./oe-init-build-env build + source ../bitbake/bin/toaster $1 noweb + [ "$1" == 'start' ] && /bin/bash + +#. Run the service:: + + $ sudo service runbuilds start + + Since the service is running in a detached screen session, you can + attach to it using this command:: + + $ sudo su - toaster + $ screen -rS runbuilds + + You can detach from the service again using "Ctrl-a" followed by "d" key + combination. + +You can now open up a browser and start using Toaster. + +Using the Toaster Web Interface +=============================== + +The Toaster web interface allows you to do the following: + +- Browse published layers in the `OpenEmbedded Layer + Index <http://layers.openembedded.org>`__ that are available for your + selected version of the build system. + +- Import your own layers for building. + +- Add and remove layers from your configuration. + +- Set configuration variables. + +- Select a target or multiple targets to build. + +- Start your builds. + +- See what was built (recipes and packages) and what packages were + installed into your final image. + +- Browse the directory structure of your image. + +- See the value of all variables in your build configuration, and which + files set each value. + +- Examine error, warning and trace messages to aid in debugging. + +- See information about the BitBake tasks executed and reused during + your build, including those that used shared state. + +- See dependency relationships between recipes, packages and tasks. + +- See performance information such as build time, task time, CPU usage, + and disk I/O. + +.. _web-interface-videos: + +Toaster Web Interface Videos +---------------------------- + +Following are several videos that show how to use the Toaster GUI: + +- *Build Configuration:* This + `video <https://www.youtube.com/watch?v=qYgDZ8YzV6w>`__ overviews and + demonstrates build configuration for Toaster. + +- *Build Custom Layers:* This + `video <https://www.youtube.com/watch?v=QJzaE_XjX5c>`__ shows you how + to build custom layers that are used with Toaster. + +- *Toaster Homepage and Table Controls:* This + `video <https://www.youtube.com/watch?v=QEARDnrR1Xw>`__ goes over the + Toaster entry page, and provides an overview of the data manipulation + capabilities of Toaster, which include search, sorting and filtering + by different criteria. + +- *Build Dashboard:* This + `video <https://www.youtube.com/watch?v=KKqHYcnp2gE>`__ shows you the + build dashboard, a page providing an overview of the information + available for a selected build. + +- *Image Information:* This + `video <https://www.youtube.com/watch?v=XqYGFsmA0Rw>`__ walks through + the information Toaster provides about images: packages installed and + root file system. + +- *Configuration:* This + `video <https://www.youtube.com/watch?v=UW-j-T2TzIg>`__ provides + Toaster build configuration information. + +- *Tasks:* This `video <https://www.youtube.com/watch?v=D4-9vGSxQtw>`__ + shows the information Toaster provides about the tasks run by the + build system. + +- *Recipes and Packages Built:* This + `video <https://www.youtube.com/watch?v=x-6dx4huNnw>`__ shows the + information Toaster provides about recipes and packages built. + +- *Performance Data:* This + `video <https://www.youtube.com/watch?v=qWGMrJoqusQ>`__ shows the + build performance data provided by Toaster. + +.. _a-note-on-the-local-yocto-project-release: + +Additional Information About the Local Yocto Project Release +------------------------------------------------------------ + +This section only applies if you have set up Toaster for local +development, as explained in the +":ref:`toaster-manual/toaster-manual-setup-and-use:starting toaster for local development`" +section. + +When you create a project in Toaster, you will be asked to provide a +name and to select a Yocto Project release. One of the release options +you will find is called "Local Yocto Project". + +.. image:: figures/new-project.png + :align: center + :scale: 75% + +When you select the "Local Yocto Project" release, Toaster will run your +builds using the local Yocto Project clone you have in your computer: +the same clone you are using to run Toaster. Unless you manually update +this clone, your builds will always use the same Git revision. + +If you select any of the other release options, Toaster will fetch the +tip of your selected release from the upstream `Yocto Project +repository <https://git.yoctoproject.org>`__ every time you run a build. +Fetching this tip effectively means that if your selected release is +updated upstream, the Git revision you are using for your builds will +change. If you are doing development locally, you might not want this +change to happen. In that case, the "Local Yocto Project" release might +be the right choice. + +However, the "Local Yocto Project" release will not provide you with any +compatible layers, other than the three core layers that come with the +Yocto Project: + +- `openembedded-core <http://layers.openembedded.org/layerindex/branch/master/layer/openembedded-core/>`__ + +- `meta-poky <http://layers.openembedded.org/layerindex/branch/master/layer/meta-poky/>`__ + +- `meta-yocto-bsp <http://layers.openembedded.org/layerindex/branch/master/layer/meta-yocto-bsp/>`__ + +.. image:: figures/compatible-layers.png + :align: center + :scale: 75% + +If you want to build any other layers, you will need to manually import +them into your Toaster project, using the "Import layer" page. + +.. image:: figures/import-layer.png + :align: center + :scale: 75% + +.. _toaster-web-interface-preferred-version: + +Building a Specific Recipe Given Multiple Versions +-------------------------------------------------- + +Occasionally, a layer might provide more than one version of the same +recipe. For example, the ``openembedded-core`` layer provides two +versions of the ``bash`` recipe (i.e. 3.2.48 and 4.3.30-r0) and two +versions of the ``which`` recipe (i.e. 2.21 and 2.18). The following +figure shows this exact scenario: + +.. image:: figures/bash-oecore.png + :align: center + :scale: 75% + +By default, the OpenEmbedded build system builds one of the two recipes. +For the ``bash`` case, version 4.3.30-r0 is built by default. +Unfortunately, Toaster as it exists, is not able to override the default +recipe version. If you would like to build bash 3.2.48, you need to set +the +:term:`PREFERRED_VERSION` +variable. You can do so from Toaster, using the "Add variable" form, +which is available in the "BitBake variables" page of the project +configuration section as shown in the following screen: + +.. image:: figures/add-variable.png + :align: center + :scale: 75% + +To specify ``bash`` 3.2.48 as the version to build, enter +"PREFERRED_VERSION_bash" in the "Variable" field, and "3.2.48" in the +"Value" field. Next, click the "Add variable" button: + +.. image:: figures/set-variable.png + :align: center + :scale: 75% + +After clicking the "Add variable" button, the settings for +``PREFERRED_VERSION`` are added to the bottom of the BitBake variables +list. With these settings, the OpenEmbedded build system builds the +desired version of the recipe rather than the default version: + +.. image:: figures/variable-added.png + :align: center + :scale: 75% |