diff options
Diffstat (limited to 'meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb')
-rw-r--r-- | meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb | 196 |
1 files changed, 196 insertions, 0 deletions
diff --git a/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb new file mode 100644 index 000000000..e0b2b58bc --- /dev/null +++ b/meta-raspberrypi/recipes-bsp/bootfiles/rpi-config_git.bb @@ -0,0 +1,196 @@ +DESCRIPTION = "Commented config.txt file for the Raspberry Pi. \ + The Raspberry Pi config.txt file is read by the GPU before \ + the ARM core is initialised. It can be used to set various \ + system configuration parameters." +LICENSE = "MIT" +LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420" + +COMPATIBLE_MACHINE = "^rpi$" + +SRCREV = "648ffc470824c43eb0d16c485f4c24816b32cd6f" +SRC_URI = "git://github.com/Evilpaul/RPi-config.git;protocol=git;branch=master \ + " + +S = "${WORKDIR}/git" + +PR = "r5" + +INHIBIT_DEFAULT_DEPS = "1" + +PITFT="${@bb.utils.contains("MACHINE_FEATURES", "pitft", "1", "0", d)}" +PITFT22="${@bb.utils.contains("MACHINE_FEATURES", "pitft22", "1", "0", d)}" +PITFT28r="${@bb.utils.contains("MACHINE_FEATURES", "pitft28r", "1", "0", d)}" +PITFT35r="${@bb.utils.contains("MACHINE_FEATURES", "pitft35r", "1", "0", d)}" + +VC4GRAPHICS="${@bb.utils.contains("MACHINE_FEATURES", "vc4graphics", "1", "0", d)}" +VC4DTBO_raspberrypi3-64 ?= "vc4-fkms-v3d" +VC4DTBO ?= "vc4-kms-v3d" + +inherit deploy nopackages + +do_deploy() { + install -d ${DEPLOYDIR}/bcm2835-bootfiles + + cp ${S}/config.txt ${DEPLOYDIR}/bcm2835-bootfiles/ + + if [ -n "${KEY_DECODE_MPG2}" ]; then + sed -i '/#decode_MPG2=/ c\decode_MPG2=${KEY_DECODE_MPG2}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${KEY_DECODE_WVC1}" ]; then + sed -i '/#decode_WVC1=/ c\decode_WVC1=${KEY_DECODE_WVC1}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${DISABLE_OVERSCAN}" ]; then + sed -i '/#disable_overscan=/ c\disable_overscan=${DISABLE_OVERSCAN}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${DISABLE_SPLASH}" ]; then + sed -i '/#disable_splash=/ c\disable_splash=${DISABLE_SPLASH}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # Set overclocking options + if [ -n "${ARM_FREQ}" ]; then + sed -i '/#arm_freq=/ c\arm_freq=${ARM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${GPU_FREQ}" ]; then + sed -i '/#gpu_freq=/ c\gpu_freq=${GPU_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${CORE_FREQ}" ]; then + sed -i '/#core_freq=/ c\core_freq=${CORE_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${SDRAM_FREQ}" ]; then + sed -i '/#sdram_freq=/ c\sdram_freq=${SDRAM_FREQ}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${OVER_VOLTAGE}" ]; then + sed -i '/#over_voltage=/ c\over_voltage=${OVER_VOLTAGE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # GPU memory + if [ -n "${GPU_MEM}" ]; then + sed -i '/#gpu_mem=/ c\gpu_mem=${GPU_MEM}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${GPU_MEM_256}" ]; then + sed -i '/#gpu_mem_256=/ c\gpu_mem_256=${GPU_MEM_256}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${GPU_MEM_512}" ]; then + sed -i '/#gpu_mem_512=/ c\gpu_mem_512=${GPU_MEM_512}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${GPU_MEM_1024}" ]; then + sed -i '/#gpu_mem_1024=/ c\gpu_mem_1024=${GPU_MEM_1024}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # Set boot delay + if [ -n "${BOOT_DELAY}" ]; then + sed -i '/#boot_delay=/ c\boot_delay=${BOOT_DELAY}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${BOOT_DELAY_MS}" ]; then + sed -i '/#boot_delay_ms=/ c\boot_delay_ms=${BOOT_DELAY_MS}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # Set HDMI and composite video options + if [ -n "${HDMI_FORCE_HOTPLUG}" ]; then + sed -i '/#hdmi_force_hotplug=/ c\hdmi_force_hotplug=${HDMI_FORCE_HOTPLUG}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${HDMI_DRIVE}" ]; then + sed -i '/#hdmi_drive=/ c\hdmi_drive=${HDMI_DRIVE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${HDMI_GROUP}" ]; then + sed -i '/#hdmi_group=/ c\hdmi_group=${HDMI_GROUP}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${HDMI_MODE}" ]; then + sed -i '/#hdmi_mode=/ c\hdmi_mode=${HDMI_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${CONFIG_HDMI_BOOST}" ]; then + sed -i '/#config_hdmi_boost=/ c\config_hdmi_boost=${CONFIG_HDMI_BOOST}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${SDTV_MODE}" ]; then + sed -i '/#sdtv_mode=/ c\sdtv_mode=${SDTV_MODE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${SDTV_ASPECT}" ]; then + sed -i '/#sdtv_aspect=/ c\sdtv_aspect=${SDTV_ASPECT}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ -n "${DISPLAY_ROTATE}" ]; then + sed -i '/#display_rotate=/ c\display_rotate=${DISPLAY_ROTATE}' ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # Video camera support + if [ -n "${VIDEO_CAMERA}" ]; then + echo "# Enable video camera" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "start_x=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # Offline compositing support + if [ -n "${DISPMANX_OFFLINE}" ]; then + echo "# Enable offline compositing" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dispmanx_offline=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # SPI bus support + if [ -n "${ENABLE_SPI_BUS}" ] || [ "${PITFT}" = "1" ]; then + echo "# Enable SPI bus" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtparam=spi=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # I2C support + if [ -n "${ENABLE_I2C}" ] || [ "${PITFT}" = "1" ]; then + echo "# Enable I2C" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtparam=i2c1=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtparam=i2c_arm=on" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # PiTFT22 display support + if [ "${PITFT22}" = "1" ]; then + echo "# Enable PITFT22 display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=pitft22,rotate=270,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ "${PITFT28r}" = "1" ]; then + echo "# Enable PITFT28r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=pitft28-resistive,rotate=90,speed=32000000,txbuflen=32768" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + if [ "${PITFT35r}" = "1" ]; then + echo "# Enable PITFT35r display" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=pitft35-resistive,rotate=90,speed=42000000,fps=20" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # UART support + if [ "${ENABLE_UART}" = "1" ]; then + echo "# Enable UART" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "enable_uart=1" >>${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # VC4 Graphics support + if [ "${VC4GRAPHICS}" = "1" ]; then + echo "# Enable VC4 Graphics" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=${VC4DTBO},${VC4_CMA_SIZE}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # Waveshare "C" 1024x600 7" Rev2.1 IPS capacitive touch (http://www.waveshare.com/7inch-HDMI-LCD-C.htm) + if [ "${WAVESHARE_1024X600_C_2_1}" = "1" ]; then + echo "# Waveshare \"C\" 1024x600 7\" Rev2.1 IPS capacitive touch screen" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "max_usb_current=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "hdmi_group=2" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "hdmi_mode=87" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "hdmi_cvt 1024 600 60 6 0 0 0" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "hdmi_drive=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # DWC2 USB peripheral support + if [ "${ENABLE_DWC2_PERIPHERAL}" = "1" ]; then + echo "# Enable USB peripheral mode" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtoverlay=dwc2,dr_mode=peripheral" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + fi + + # Append extra config if the user has provided any + echo "${RPI_EXTRA_CONFIG}" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt +} + +do_deploy_append_raspberrypi3-64() { + echo "# have a properly sized image" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "disable_overscan=1" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + + echo "# Enable audio (loads snd_bcm2835)" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt + echo "dtparam=audio=on" >> ${DEPLOYDIR}/bcm2835-bootfiles/config.txt +} + +addtask deploy before do_build after do_install +do_deploy[dirs] += "${DEPLOYDIR}/bcm2835-bootfiles" + +PACKAGE_ARCH = "${MACHINE_ARCH}" |