diff options
author | Joel Stanley <joel@jms.id.au> | 2021-09-02 10:45:09 +0300 |
---|---|---|
committer | Joel Stanley <joel@jms.id.au> | 2021-09-21 02:08:01 +0300 |
commit | be4501335c8fb44d2dedf57d7e1d3dcc73d92925 (patch) | |
tree | b4a59ca49317beda9de5b62c2e5358fccc598ac4 /meta-aspeed/recipes-kernel/linux | |
parent | 4734c22edc654522fad23b82a66a140b46a29266 (diff) | |
download | openbmc-be4501335c8fb44d2dedf57d7e1d3dcc73d92925.tar.xz |
linux-openbmc: Move to Linux v5.14
This moves the OpeNBMC kernel to a v5.14 base. There are 78 patches in
the tree, plus a the MCTP core and device tree changes that were merged
in v5.15 which have been backported.
Andrew Jeffery (11):
dt-bindings: hwmon: pmbus: Add Maxim MAX31785 documentation
pmbus (max31785): Add support for devicetree configuration
pmbus (core): Use driver callbacks in pmbus_get_fan_rate()
pmbus (core): One-shot retries for failure to set page
pmbus (max31785): Wrap all I2C accessors in one-shot failure handlers
ARM: dts: aspeed: witherspoon: Update max31785 node
ipmi: kcs_bmc: Add a "raw" character device interface
ARM: dts: p10bmc: Drop the openbmc, mctp-lpc node
ARM: dts: aspeed: p10bmc: Switch to KCS 3 for MCTP binding
ARM: dts: aspeed: p10bmc: Enable KCS channel 2
ARM: dts: tacoma: Clean up KCS nodes
B. J. Wyman (2):
ARM: dts: aspeed: Rainier remove PSU gpio-keys
hwmon: (pmbus/ibm-cffps) Fix write bits for LED control
Brad Bishop (3):
ipmi: aspeed-g6: Add compatible strings
reset: simple: Add AST2600 compatibility string
eeprom: at25: Split reads into chunks and cap write size
Cédric Le Goater (19):
mtd: spi-nor: aspeed: use command mode for reads
mtd: spi-nor: aspeed: add support for SPI dual IO read mode
mtd: spi-nor: aspeed: link controller with the ahb clock
mtd: spi-nor: aspeed: optimize read mode
mtd: spi-nor: aspeed: limit the maximum SPI frequency
mtd: spi-nor: aspeed: introduce a aspeed_smc_default_read() helper
mtd: spi-nor: aspeed: clarify 4BYTE address mode mask
mtd: spi-nor: aspeed: use memcpy_fromio() to capture the optimization buffer
mtd: spi-nor: aspeed: add support for the 4B opcodes
mtd: spi-nor: Add support for w25q512jv
mtd: spi-nor: aspeed: Introduce a field for the AHB physical address
mtd: spi-nor: aspeed: Introduce segment operations
mtd: spi-nor: aspeed: add initial support for ast2600
mtd: spi-nor: aspeed: Check for disabled segments on the AST2600
mtd: spi-nor: aspeed: Introduce training operations per platform
mtd: spi-nor: aspeed: Introduce a HCLK mask for training
mtd: spi-nor: aspeed: check upper freq limit when doing training
mtd: spi-nor: aspeed: add support for AST2600 training
/dev/mem: add a devmem kernel parameter to activate the device
Eddie James (11):
dt-bindings: soc: Add Aspeed XDMA Engine
soc: aspeed: Add XDMA Engine Driver
soc: aspeed: xdma: Add user interface
soc: aspeed: xdma: Add reset ioctl
dt-bindings: input: Add documentation for IBM Operation Panel
input: misc: Add IBM Operation Panel driver
ARM: dts: aspeed: tacoma: Remove CFAM reset GPIO
spi: fsi: Reduce max transfer size to 8 bytes
dt-bindings: fsi: Remove ibm,fsi2spi-restricted compatible
fsi: occ: Force sequence numbering per OCC
hwmon: (occ) Remove sequence numbering and checksum calculation
Fran Hsu (2):
ARM: dts: nuvoton: npcm730: Add UDC device
ARM: dts: nuvoton: gsj: Add non-mainline nodes
George Hung (2):
dt-binding: edac: add NPCM ECC documentation
edac: npcm: Add Nuvoton NPCM7xx EDAC driver
Isaac Kurth (1):
ARM: dts: everest: Add 'factory-reset-toggle' as GPIOF6
Jae Hyun Yoo (1):
clk: ast2600: enable BCLK for PCI/PCIe bus always
Joel Stanley (4):
net: ftgmac100: Ensure tx descriptor updates are visible
ARM: dts: ast2600evb: Enable EHCI controller
ARM: dts: aspeed: rainier: Enable earlycon
ARM: configs: aspeed: Add openbmc kernel options
Tomer Maimon (21):
dt-binding: bmc: Add NPCM7xx LPC BPC documentation
misc: npcm7xx-lpc-bpc: add NPCM7xx BIOS post code driver
dt-binding: bmc: add npcm7xx pci mailbox document
misc: mbox: add npcm7xx pci mailbox driver
dt-binding: net: document NPCM7xx EMC DT bindings
net: npcm: add NPCM7xx Ethernet MAC controller
ARM: dts: npcm7xx: Add out of tree nodes
ARM: dts: olympus: Add non-mainline nodes
ARM: dts: npcm750: Add fuse regmap support node
ARM: dts: npcm7xx: Link fuse syscon to adc and wdt
clk: npcm7xx: add read only flag to divider clocks
iio: adc: Add calibration support to npcm ADC
watchdog: npcm: Add DT restart priority and reset type support
pinctrl: npcm7xx: Add HGPIO pin support to NPCM7xx pinctrl driver
pinctrl: pinconf: add pin persist configuration
pinctrl: npcm7xx: Add pin persist configuration support
spi: npcm-pspi: Add full duplex support
dt-binding: bmc: add NPCM7XX JTAG master documentation
misc: Add NPCM7xx JTAG master driver
watchdog: npcm: Modify get reset status function
ARM: configs: add defconfig for Nuvoton NPCM7xx BMC
William A. Kennington III (1):
net: npcm: Support for fixed PHYs
Change-Id: I315000ab63c3f6a34d99cf25e366fa0781c85d46
Signed-off-by: Joel Stanley <joel@jms.id.au>
Diffstat (limited to 'meta-aspeed/recipes-kernel/linux')
-rw-r--r-- | meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb b/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb index e52a2bdc3..9b60e534f 100644 --- a/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb +++ b/meta-aspeed/recipes-kernel/linux/linux-aspeed_git.bb @@ -1,6 +1,6 @@ -KBRANCH ?= "dev-5.10" -LINUX_VERSION ?= "5.10.65" +KBRANCH ?= "dev-5.14" +LINUX_VERSION ?= "5.14" -SRCREV="68ff7fd3234e93c60baec9c9f519d7b45a014336" +SRCREV="e2413239f9a751a2a7491569d27dce76773f2777" require linux-aspeed.inc |