1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
|
# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/i2c/snps,designware-i2c.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Synopsys DesignWare APB I2C Controller
maintainers:
- Jarkko Nikula <jarkko.nikula@linux.intel.com>
allOf:
- $ref: /schemas/i2c/i2c-controller.yaml#
- if:
properties:
compatible:
not:
contains:
const: mscc,ocelot-i2c
then:
properties:
reg:
maxItems: 1
properties:
compatible:
oneOf:
- description: Generic Synopsys DesignWare I2C controller
const: snps,designware-i2c
- description: Microsemi Ocelot SoCs I2C controller
items:
- const: mscc,ocelot-i2c
- const: snps,designware-i2c
- description: Baikal-T1 SoC System I2C controller
const: baikal,bt1-sys-i2c
reg:
minItems: 1
items:
- description: DW APB I2C controller memory mapped registers
- description: |
ICPU_CFG:TWI_DELAY registers to setup the SDA hold time.
This registers are specific to the Ocelot I2C-controller.
interrupts:
maxItems: 1
clocks:
minItems: 1
items:
- description: I2C controller reference clock source
- description: APB interface clock source
clock-names:
minItems: 1
items:
- const: ref
- const: pclk
resets:
maxItems: 1
clock-frequency:
description: Desired I2C bus clock frequency in Hz
enum: [100000, 400000, 1000000, 3400000]
default: 400000
i2c-sda-hold-time-ns:
maxItems: 1
description: |
The property should contain the SDA hold time in nanoseconds. This option
is only supported in hardware blocks version 1.11a or newer or on
Microsemi SoCs.
i2c-scl-falling-time-ns:
maxItems: 1
description: |
The property should contain the SCL falling time in nanoseconds.
This value is used to compute the tLOW period.
default: 300
i2c-sda-falling-time-ns:
maxItems: 1
description: |
The property should contain the SDA falling time in nanoseconds.
This value is used to compute the tHIGH period.
default: 300
dmas:
items:
- description: TX DMA Channel
- description: RX DMA Channel
dma-names:
items:
- const: tx
- const: rx
unevaluatedProperties: false
required:
- compatible
- reg
- interrupts
examples:
- |
i2c@f0000 {
compatible = "snps,designware-i2c";
reg = <0xf0000 0x1000>;
interrupts = <11>;
clock-frequency = <400000>;
};
- |
i2c@1120000 {
compatible = "snps,designware-i2c";
reg = <0x1120000 0x1000>;
interrupts = <12 1>;
clock-frequency = <400000>;
i2c-sda-hold-time-ns = <300>;
i2c-sda-falling-time-ns = <300>;
i2c-scl-falling-time-ns = <300>;
};
- |
i2c@2000 {
compatible = "snps,designware-i2c";
reg = <0x2000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
clock-frequency = <400000>;
clocks = <&i2cclk>;
interrupts = <0>;
eeprom@64 {
compatible = "atmel,24c02";
reg = <0x64>;
};
};
- |
i2c@100400 {
compatible = "mscc,ocelot-i2c", "snps,designware-i2c";
reg = <0x100400 0x100>, <0x198 0x8>;
pinctrl-0 = <&i2c_pins>;
pinctrl-names = "default";
interrupts = <8>;
clocks = <&ahb_clk>;
};
...
|
