/* * Copyright (c) 2014 MediaTek Inc. * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #ifndef __PINCTRL_MTK_COMMON_H #define __PINCTRL_MTK_COMMON_H #include <linux/pinctrl/pinctrl.h> #include <linux/regmap.h> #include <linux/pinctrl/pinconf-generic.h> #include "mtk-eint.h" #define NO_EINT_SUPPORT 255 #define MT_EDGE_SENSITIVE 0 #define MT_LEVEL_SENSITIVE 1 #define EINT_DBNC_SET_DBNC_BITS 4 #define EINT_DBNC_RST_BIT (0x1 << 1) #define EINT_DBNC_SET_EN (0x1 << 0) #define MTK_PINCTRL_NOT_SUPPORT (0xffff) struct mtk_desc_function { const char *name; unsigned char muxval; }; struct mtk_desc_eint { unsigned char eintmux; unsigned char eintnum; }; struct mtk_desc_pin { struct pinctrl_pin_desc pin; const struct mtk_desc_eint eint; const struct mtk_desc_function *functions; }; #define MTK_PIN(_pin, _pad, _chip, _eint, ...) \ { \ .pin = _pin, \ .eint = _eint, \ .functions = (struct mtk_desc_function[]){ \ __VA_ARGS__, { } }, \ } #define MTK_EINT_FUNCTION(_eintmux, _eintnum) \ { \ .eintmux = _eintmux, \ .eintnum = _eintnum, \ } #define MTK_FUNCTION(_val, _name) \ { \ .muxval = _val, \ .name = _name, \ } #define SET_ADDR(x, y) (x + (y->devdata->port_align)) #define CLR_ADDR(x, y) (x + (y->devdata->port_align << 1)) struct mtk_pinctrl_group { const char *name; unsigned long config; unsigned pin; }; /** * struct mtk_drv_group_desc - Provide driving group data. * @max_drv: The maximum current of this group. * @min_drv: The minimum current of this group. * @low_bit: The lowest bit of this group. * @high_bit: The highest bit of this group. * @step: The step current of this group. */ struct mtk_drv_group_desc { unsigned char min_drv; unsigned char max_drv; unsigned char low_bit; unsigned char high_bit; unsigned char step; }; #define MTK_DRV_GRP(_min, _max, _low, _high, _step) \ { \ .min_drv = _min, \ .max_drv = _max, \ .low_bit = _low, \ .high_bit = _high, \ .step = _step, \ } /** * struct mtk_pin_drv_grp - Provide each pin driving info. * @pin: The pin number. * @offset: The offset of driving register for this pin. * @bit: The bit of driving register for this pin. * @grp: The group for this pin belongs to. */ struct mtk_pin_drv_grp { unsigned short pin; unsigned short offset; unsigned char bit; unsigned char grp; }; #define MTK_PIN_DRV_GRP(_pin, _offset, _bit, _grp) \ { \ .pin = _pin, \ .offset = _offset, \ .bit = _bit, \ .grp = _grp, \ } /** * struct mtk_pin_spec_pupd_set_samereg * - For special pins' pull up/down setting which resides in same register * @pin: The pin number. * @offset: The offset of special pull up/down setting register. * @pupd_bit: The pull up/down bit in this register. * @r0_bit: The r0 bit of pull resistor. * @r1_bit: The r1 bit of pull resistor. */ struct mtk_pin_spec_pupd_set_samereg { unsigned short pin; unsigned short offset; unsigned char pupd_bit; unsigned char r1_bit; unsigned char r0_bit; }; #define MTK_PIN_PUPD_SPEC_SR(_pin, _offset, _pupd, _r1, _r0) \ { \ .pin = _pin, \ .offset = _offset, \ .pupd_bit = _pupd, \ .r1_bit = _r1, \ .r0_bit = _r0, \ } /** * struct mtk_pin_ies_set - For special pins' ies and smt setting. * @start: The start pin number of those special pins. * @end: The end pin number of those special pins. * @offset: The offset of special setting register. * @bit: The bit of special setting register. */ struct mtk_pin_ies_smt_set { unsigned short start; unsigned short end; unsigned short offset; unsigned char bit; }; #define MTK_PIN_IES_SMT_SPEC(_start, _end, _offset, _bit) \ { \ .start = _start, \ .end = _end, \ .bit = _bit, \ .offset = _offset, \ } struct mtk_eint_offsets { const char *name; unsigned int stat; unsigned int ack; unsigned int mask; unsigned int mask_set; unsigned int mask_clr; unsigned int sens; unsigned int sens_set; unsigned int sens_clr; unsigned int soft; unsigned int soft_set; unsigned int soft_clr; unsigned int pol; unsigned int pol_set; unsigned int pol_clr; unsigned int dom_en; unsigned int dbnc_ctrl; unsigned int dbnc_set; unsigned int dbnc_clr; u8 port_mask; u8 ports; }; /** * struct mtk_pinctrl_devdata - Provide HW GPIO related data. * @pins: An array describing all pins the pin controller affects. * @npins: The number of entries in @pins. * * @grp_desc: The driving group info. * @pin_drv_grp: The driving group for all pins. * @spec_pull_set: Each SoC may have special pins for pull up/down setting, * these pins' pull setting are very different, they have separate pull * up/down bit, R0 and R1 resistor bit, so they need special pull setting. * If special setting is success, this should return 0, otherwise it should * return non-zero value. * @spec_ies_smt_set: Some pins are irregular, their input enable and smt * control register are discontinuous, but they are mapping together. That * means when user set smt, input enable is set at the same time. So they * also need special control. If special control is success, this should * return 0, otherwise return non-zero value. * @spec_pinmux_set: In some cases, there are two pinmux functions share * the same value in the same segment of pinmux control register. If user * want to use one of the two functions, they need an extra bit setting to * select the right one. * @spec_dir_set: In very few SoCs, direction control registers are not * arranged continuously, they may be cut to parts. So they need special * dir setting. * @dir_offset: The direction register offset. * @pullen_offset: The pull-up/pull-down enable register offset. * @pinmux_offset: The pinmux register offset. * * @type1_start: Some chips have two base addresses for pull select register, * that means some pins use the first address and others use the second. This * member record the start of pin number to use the second address. * @type1_end: The end of pin number to use the second address. * * @port_shf: The shift between two registers. * @port_mask: The mask of register. * @port_align: Provide clear register and set register step. */ struct mtk_pinctrl_devdata { const struct mtk_desc_pin *pins; unsigned int npins; const struct mtk_drv_group_desc *grp_desc; unsigned int n_grp_cls; const struct mtk_pin_drv_grp *pin_drv_grp; unsigned int n_pin_drv_grps; int (*spec_pull_set)(struct regmap *reg, unsigned int pin, unsigned char align, bool isup, unsigned int arg); int (*spec_ies_smt_set)(struct regmap *reg, unsigned int pin, unsigned char align, int value, enum pin_config_param arg); void (*spec_pinmux_set)(struct regmap *reg, unsigned int pin, unsigned int mode); void (*spec_dir_set)(unsigned int *reg_addr, unsigned int pin); unsigned int dir_offset; unsigned int ies_offset; unsigned int smt_offset; unsigned int pullen_offset; unsigned int pullsel_offset; unsigned int drv_offset; unsigned int dout_offset; unsigned int din_offset; unsigned int pinmux_offset; unsigned short type1_start; unsigned short type1_end; unsigned char port_shf; unsigned char port_mask; unsigned char port_align; struct mtk_eint_hw eint_hw; struct mtk_eint_regs *eint_regs; }; struct mtk_pinctrl { struct regmap *regmap1; struct regmap *regmap2; struct pinctrl_desc pctl_desc; struct device *dev; struct gpio_chip *chip; struct mtk_pinctrl_group *groups; unsigned ngroups; const char **grp_names; struct pinctrl_dev *pctl_dev; const struct mtk_pinctrl_devdata *devdata; struct mtk_eint *eint; }; int mtk_pctrl_init(struct platform_device *pdev, const struct mtk_pinctrl_devdata *data, struct regmap *regmap); int mtk_pctrl_spec_pull_set_samereg(struct regmap *regmap, const struct mtk_pin_spec_pupd_set_samereg *pupd_infos, unsigned int info_num, unsigned int pin, unsigned char align, bool isup, unsigned int r1r0); int mtk_pconf_spec_set_ies_smt_range(struct regmap *regmap, const struct mtk_pin_ies_smt_set *ies_smt_infos, unsigned int info_num, unsigned int pin, unsigned char align, int value); extern const struct dev_pm_ops mtk_eint_pm_ops; #endif /* __PINCTRL_MTK_COMMON_H */