/dts-v1/;

#include "aspeed-g5.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>

/ {
	model = "Zaius BMC";
	compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";

	aliases {
		serial4 = &uart5;
	};

	chosen {
		stdout-path = &uart5;
		bootargs = "console=ttyS4,115200 earlyprintk";
	};

	memory {
		reg = <0x80000000 0x40000000>;
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges;

		flash_memory: region@98000000 {
			no-map;
			reg = <0x98000000 0x04000000>; /* 64M */
		};
	};

	onewire0 {
		compatible = "w1-gpio";
		gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
	};

	onewire1 {
		compatible = "w1-gpio";
		gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
	};

	onewire2 {
		compatible = "w1-gpio";
		gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
	};

	onewire3 {
		compatible = "w1-gpio";
		gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
	};

	leds {
		compatible = "gpio-leds";

		sys_boot_status {
			label = "System boot status";
			gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
		};

		attention {
			label = "Attention";
			gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
		};

		plt_fault {
			label = "Platform fault";
			gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
		};

		hdd_fault {
			label = "Onboard drive fault";
			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
		};
	};

	fsi-master {
		compatible = "ibm,fsi-master", "ibm,fsi-master-gpio";

		status = "okay";

		clock-gpios = <&gpio ASPEED_GPIO(C, 3) GPIO_ACTIVE_HIGH>;
		data-gpios = <&gpio ASPEED_GPIO(C, 2) GPIO_ACTIVE_HIGH>;
		trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
		mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;

		sbefifo1: sbefifo@2400 {
			compatible = "ibm,power9-sbefifo";

			status = "okay";

			reg = <0x2400>;

			occ@1 {
				compatible = "ibm,p9-occ";
				reg = <1>;
			};
		};

		sbefifo2: sbefifo@82400 {
			compatible = "ibm,power9-sbefifo";

			status = "okay";

			reg = <0x2400>;

			occ@2 {
				compatible = "ibm,p9-occ";
				reg = <2>;
			};
		};
	};

	iio-hwmon {
		compatible = "iio-hwmon";
		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
			<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
			<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
			<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
	};
};

&fmc {
	status = "okay";
	flash@0 {
		status = "okay";
#include "aspeed-bmc-opp-flash-layout.dtsi"
	};
};

&spi1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi1_default>;

	flash@0 {
		status = "okay";
		label = "pnor";
	};
};

&spi2 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spi2ck_default
		     &pinctrl_spi2cs0_default
		     &pinctrl_spi2cs1_default
		     &pinctrl_spi2miso_default
		     &pinctrl_spi2mosi_default>;

	flash@0 {
		status = "okay";
	};
};

&uart1 {
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_txd1_default
		     &pinctrl_rxd1_default>;
};

&lpc_ctrl {
	status = "okay";
	memory-region = <&flash_memory>;
	flash = <&spi1>;
};

&mbox {
	status = "okay";
};

&uart5 {
	status = "okay";
};

&mac0 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_rmii1_default>;
	use-ncsi;
};

&mac1 {
	status = "okay";

	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
};

&i2c0 {
	status = "okay";

	eeprom@50 {
		compatible = "atmel,24c64";
		reg = <0x50>;
		pagesize = <32>;
	};

	rtc@68 {
		compatible = "nxp,pcf8523";
		reg = <0x68>;
	};

	ucd90160@64 {
		compatible = "ti,ucd90160";
		reg = <0x64>;
	};

	/* Power sequencer UCD90160 PMBUS @64h
	 * FRU AT24C64D @50h
	 * RTC PCF8523 @68h
	 * Clock buffer 9DBL04 @6dh
	 */
};

&i2c1 {
	status = "okay";

	i2c-switch@71 {
		compatible = "nxp,pca9546";
		reg = <0x71>;
		#address-cells = <1>;
		#size-cells = <0>;
	};

	/* MUX1 PCA9546A @71h
	 *   PCIe 0
	 *   PCIe 1
	 *   PCIe 2
	 *   TPM header
	 */
};

&i2c2 {
	status = "disabled";

	/* OCP Mezz Connector A (OOB SMBUS) */
};

&i2c3 {
	status = "disabled";

	/* OCP Mezz Connector A (PCIe slot SMBUS) */
};

&i2c4 {
	status = "okay";

	i2c-switch@71 {
		compatible = "nxp,pca9546";
		reg = <0x71>;
		#address-cells = <1>;
		#size-cells = <0>;
	};

	/* MUX1 PCA9546A @71h
	 *   PCIe 3
	 *   PCIe 4
	 */
};


&i2c5 {
	status = "disabled";

	/* CPU0 PRM 0.7V */
	/* CPU0 PRM 1.2V CH03 */
	/* CPU0 PRM 0.8V */
	/* CPU0 PRM 1.2V CH47 */
};

&i2c6 {
	status = "disabled";

	/* CPU1 PRM 0.7V */
	/* CPU1 PRM 1.2V CH03 */
	/* CPU1 PRM 0.8V */
	/* CPU1 PRM 1.2V CH47 */
};

&i2c7 {
	status = "okay";

	pca9541a@70 {
		compatible = "nxp,pca9541";
		reg = <0x70>;

		i2c-arb {
			#address-cells = <1>;
			#size-cells = <0>;

			hotswap@10 {
				compatible = "ti,lm5066";
				reg = <0x10>;
			};
		};
	};

	/* Master selector PCA9541A @70h (other master: CPU0)
	 *   LM5066I PMBUS @10h
	 */

	/* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
	power-brick@61 {
		compatible = "delta,dps800";
		reg = <0x61>;
	};

	/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
	/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
	/* CPU0 VR ISL68137 0.8V PMBUS @60h */
	/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
};

&i2c8 {
	status = "okay";

	/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
	/* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
	/* CPU1 VR ISL68137 0.8V PMBUS @61h */
	/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
	/* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
};


&i2c9 {
	status = "disabled";

	/* Fan board */
};

&i2c10 {
	status = "disabled";
};

&i2c11 {
	status = "disabled";

	/* GPU sideband */
};

&i2c12 {
	status = "disabled";
};

&i2c13 {
	status = "disabled";

	/* MUX PI3USB102
	 *   CPU0 debug
	 *   CPU1 debug
	 */
};

&gpio {
	line_iso_u146_en {
		gpio-hog;
		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "iso_u164_en";
	};

	ncsi_mux_en_n {
		gpio-hog;
		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
		output-low;
		line-name = "ncsi_mux_en_n";
	};

	line_bmc_i2c2_sw_rst_n {
		gpio-hog;
		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "bmc_i2c2_sw_rst_n";
	};

	line_bmc_i2c5_sw_rst_n {
		gpio-hog;
		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
		output-high;
		line-name = "bmc_i2c5_sw_rst_n";
	};
};

&vuart {
	status = "okay";
};

&gfx {
	status = "okay";
};

&pinctrl {
	aspeed,external-nodes = <&gfx &lhc>;
};