From bc83b6819289c031c439a5aa18ba0fd539d14f3e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 29 Nov 2009 12:19:06 +0100 Subject: mac80211: recalculate idle later in MLME hwsim testing has revealed that when the MLME recalculates the idle state of the device, it sometimes does so before sending the final deauthentication or disassociation frame. This patch changes the place where the idle state is recalculated, but of course driver transmit is typically asynchronous while configuration is expected to be synchronous, so it doesn't fix all possible cases yet. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/mlme.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6dc7b5ad9a41..d8d50fb5e823 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1083,8 +1083,6 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, ieee80211_set_wmm_default(sdata); - ieee80211_recalc_idle(local); - /* channel(_type) changes are handled by ieee80211_hw_config */ local->oper_channel_type = NL80211_CHAN_NO_HT; @@ -1370,6 +1368,7 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, if (!wk) { ieee80211_set_disassoc(sdata, true); + ieee80211_recalc_idle(sdata->local); } else { list_del(&wk->list); kfree(wk); @@ -1403,6 +1402,7 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, sdata->dev->name, mgmt->sa, reason_code); ieee80211_set_disassoc(sdata, false); + ieee80211_recalc_idle(sdata->local); return RX_MGMT_CFG80211_DISASSOC; } @@ -2117,6 +2117,7 @@ static void ieee80211_sta_work(struct work_struct *work) " after %dms, disconnecting.\n", bssid, (1000 * IEEE80211_PROBE_WAIT)/HZ); ieee80211_set_disassoc(sdata, true); + ieee80211_recalc_idle(local); mutex_unlock(&ifmgd->mtx); /* * must be outside lock due to cfg80211, @@ -2560,6 +2561,8 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, IEEE80211_STYPE_DEAUTH, req->reason_code, cookie); + ieee80211_recalc_idle(sdata->local); + return 0; } @@ -2592,5 +2595,8 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, ieee80211_send_deauth_disassoc(sdata, req->bss->bssid, IEEE80211_STYPE_DISASSOC, req->reason_code, cookie); + + ieee80211_recalc_idle(sdata->local); + return 0; } -- cgit v1.2.3 From 7c3f4bbedc241ddcd3abe1f419c356e625231da1 Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Mon, 30 Nov 2009 16:50:53 +0530 Subject: mac80211: Fix dynamic power save for scanning. Not only ps_sdata but also IEEE80211_CONF_PS is to be considered before restoring PS in scan_ps_disable(). For instance, when ps_sdata is set but CONF_PS is not set just because the dynamic timer is still running, a sw scan leads to setting of CONF_PS in scan_ps_disable instead of restarting the dynamic PS timer. Also for the above case, a null data frame is to be sent after returning to operating channel which was not happening with the current implementation. This patch fixes this too. Signed-off-by: Vivek Natarajan Reviewed-by: Kalle Valo Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 1 + net/mac80211/scan.c | 20 ++++++++++++++++---- 2 files changed, 17 insertions(+), 4 deletions(-) (limited to 'net') diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 419f186cfcf0..91dc8636d644 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -746,6 +746,7 @@ struct ieee80211_local { unsigned int wmm_acm; /* bit field of ACM bits (BIT(802.1D tag)) */ bool pspolling; + bool scan_ps_enabled; /* * PS can only be enabled when we have exactly one managed * interface (and monitors) in PS, this then points there. diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 4cf387c944bf..f1a4c7160300 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -227,7 +227,8 @@ static bool ieee80211_prep_hw_scan(struct ieee80211_local *local) static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; - bool ps = false; + + local->scan_ps_enabled = false; /* FIXME: what to do when local->pspolling is true? */ @@ -235,12 +236,13 @@ static void ieee80211_scan_ps_enable(struct ieee80211_sub_if_data *sdata) cancel_work_sync(&local->dynamic_ps_enable_work); if (local->hw.conf.flags & IEEE80211_CONF_PS) { - ps = true; + local->scan_ps_enabled = true; local->hw.conf.flags &= ~IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); } - if (!ps || !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) + if (!(local->scan_ps_enabled) || + !(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) /* * If power save was enabled, no need to send a nullfunc * frame because AP knows that we are sleeping. But if the @@ -261,7 +263,7 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata) if (!local->ps_sdata) ieee80211_send_nullfunc(local, sdata, 0); - else { + else if (local->scan_ps_enabled) { /* * In !IEEE80211_HW_PS_NULLFUNC_STACK case the hardware * will send a nullfunc frame with the powersave bit set @@ -277,6 +279,16 @@ static void ieee80211_scan_ps_disable(struct ieee80211_sub_if_data *sdata) */ local->hw.conf.flags |= IEEE80211_CONF_PS; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); + } else if (local->hw.conf.dynamic_ps_timeout > 0) { + /* + * If IEEE80211_CONF_PS was not set and the dynamic_ps_timer + * had been running before leaving the operating channel, + * restart the timer now and send a nullfunc frame to inform + * the AP that we are awake. + */ + ieee80211_send_nullfunc(local, sdata, 0); + mod_timer(&local->dynamic_ps_timer, jiffies + + msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); } } -- cgit v1.2.3 From 02f7f1793023bd8e5e277ad349f6f43f8c284fb0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 3 Dec 2009 20:45:07 -0800 Subject: net/rfkill/core.c: work around gcc-4.0.2 silliness net/rfkill/core.c: In function 'rfkill_type_show': net/rfkill/core.c:610: warning: control may reach end of non-void function 'rfkill_get_type_str' being inlined A gcc bug, but simple enough to squish. Cc: John W. Linville Cc: Johannes Berg Cc: David S. Miller Signed-off-by: Andrew Morton Signed-off-by: John W. Linville --- net/rfkill/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'net') diff --git a/net/rfkill/core.c b/net/rfkill/core.c index 448e5a0fcc2e..c218e07e5caf 100644 --- a/net/rfkill/core.c +++ b/net/rfkill/core.c @@ -579,6 +579,8 @@ static ssize_t rfkill_name_show(struct device *dev, static const char *rfkill_get_type_str(enum rfkill_type type) { + BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_FM + 1); + switch (type) { case RFKILL_TYPE_WLAN: return "wlan"; @@ -597,8 +599,6 @@ static const char *rfkill_get_type_str(enum rfkill_type type) default: BUG(); } - - BUILD_BUG_ON(NUM_RFKILL_TYPES != RFKILL_TYPE_FM + 1); } static ssize_t rfkill_type_show(struct device *dev, -- cgit v1.2.3 From 1814077fd12a9cdf478c10076e9c42094e9d9250 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Fri, 4 Dec 2009 17:41:34 +0530 Subject: mac80211: Fix bug in computing crc over dynamic IEs in beacon On a 32-bit machine, BIT() macro does not give the required bit value if the bit is mroe than 31. In ieee802_11_parse_elems_crc(), BIT() is suppossed to get the bit value more than 31 (42 (id of ERP_INFO_IE), 37 (CHANNEL_SWITCH_IE), (42), 32 (POWER_CONSTRAINT_IE), 45 (HT_CAP_IE), 61 (HT_INFO_IE)). As we do not get the required bit value for the above IEs, crc over these IEs are never calculated, so any dynamic change in these IEs after the association is not really handled on 32-bit platforms. This patch fixes this issue. Cc: stable@kernel.org Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- net/mac80211/util.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'net') diff --git a/net/mac80211/util.c b/net/mac80211/util.c index d09f78bb2442..78a6e924c7e1 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -579,7 +579,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, if (elen > left) break; - if (calc_crc && id < 64 && (filter & BIT(id))) + if (calc_crc && id < 64 && (filter & (1ULL << id))) crc = crc32_be(crc, pos - 2, elen + 2); switch (id) { -- cgit v1.2.3